The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload that clearly exposes the balance between processor and graphics hardware. With the Intel Core i5-12600KF paired with the AMD Radeon RX 6800 XT, the benchmark data reveals a system that is heavily GPU-bound at higher resolutions but capable of exceptional frame rates at 1080p. The measured results indicate a configuration that scales predictably with graphical fidelity, though the performance ceiling varies significantly across the three tested resolutions.

Resolution Scaling

The transition from 1920x1080 to 3840x2160 shows a dramatic impact on performance, highlighting the Radeon RX 6800 XT as the primary limiting factor at higher pixel counts. At High settings, the average frame rate drops from 141.7 FPS at 1080p to 94.6 FPS at 1440p, a substantial decrease that continues to 48.2 FPS at 4K. This scaling pattern is classic for a GPU-bound scenario; the processor has ample headroom to feed frames, but the graphics card must work progressively harder to fill the increasing number of pixels.

The data suggests that 1440p is the sweet spot for this combination, offering a high refresh rate experience without the severe performance penalty of 4K. The gap between 1440p and 4K is particularly pronounced, with the 4K High result being less than half the frame rate of the 1080p High result. This indicates that the RX 6800 XT’s 16 GB of GDDR6 memory and 512.0 GB/s bandwidth are sufficient for the data set, but the raw compute power of the GPU is what ultimately caps performance. In contrast, the jump from 1080p to 1440p is less punishing, suggesting that the CPU is still capable of keeping up with the GPU’s output at that intermediate resolution.

How This Combo Ranks

Within the database of tested combinations, this specific pairing achieves a rank of 594 out of 1656 combinations, placing it in the upper third of all tested systems for this game. This ranking is a strong indicator that the Intel Core i5-12600KF and AMD Radeon RX 6800 XT form a potent partnership for The Technomancer. The percentile data for the individual components reinforces this, with the CPU sitting in the 84th percentile against all CPUs and the GPU in the 87th percentile against all GPUs.

The combo’s overall position suggests it outperforms the majority of systems that have been benchmarked, but it is not at the absolute top tier. This placement is consistent with the measured FPS, which shows excellent performance at 1080p and 1440p but falls short of a smooth 60 FPS at 4K Ultra. The rank reflects a balanced system that is not held back by a severe bottleneck, though the GPU’s performance at 4K prevents it from climbing higher in the rankings. When compared to other tested combos, this setup is clearly designed for high-refresh-rate gaming at standard resolutions rather than maximum-fidelity 4K.

CPU Role

The Intel Core i5-12600KF is built on the Alder Lake architecture with a hybrid design of 10 cores and 16 threads. Its base clock of 3.70 GHz and boost clock of 4.90 GHz provide substantial single-thread performance, which is critical for game logic and physics. The benchmark data for the CPU shows a strong showing in synthetic tests, with a Cinebench R23 multicore score of 23444 and a single-core score of 3309, indicating that it can handle both heavily threaded and lightly threaded workloads with ease.

In the context of The Technomancer, the CPU’s role appears to be that of a capable and consistent provider of frame data. The fact that frame rates scale almost linearly with resolution from 1080p to 1440p suggests that the CPU is not the bottleneck at these settings. At 1080p, the CPU is able to feed the GPU enough data to reach 217.4 FPS on Low settings and 141.7 FPS on High. This indicates that the 10-core, 16-thread configuration is more than sufficient for this title, which was released in 2016 and likely does not utilize more than a few cores effectively. The CPU’s 20 MB of shared L3 cache also helps to reduce latency for frequently accessed data, contributing to the smooth frame pacing seen in the results. Overall, the i5-12600KF provides a solid foundation that allows the graphics card to operate at its full potential until the pixel count becomes overwhelming.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the system’s performance across all settings and resolutions. At 1920x1080, the system is exceptionally fast, with an average of 217.4 FPS on Low settings. This drops to 163.4 FPS on Medium and 141.7 FPS on High, before settling at 111.8 FPS on Ultra. These numbers demonstrate that the RX 6800 XT is rarely challenged at this resolution, and the frame rate is likely limited by the game’s engine or the CPU’s single-thread performance at the very highest settings.

Moving to 2560x1440, the performance remains very strong but shows the expected decrease. The Low setting average is 140.7 FPS, which is still well above the 100 FPS mark. Medium averages 105.5 FPS, and High averages 94.6 FPS. The Ultra setting at 1440p averages 69.7 FPS, which is still a playable frame rate but begins to show the GPU’s workload increasing. At 3840x2160, the performance drops significantly. The Low setting averages 75 FPS, which is a solid result, but Medium falls to 61.4 FPS. High settings average 48.2 FPS, and Ultra drops to 39.3 FPS. These 4K results indicate that the RX 6800 XT, while powerful, cannot maintain a smooth 60 FPS experience at the higher quality presets, and users targeting 4K will need to adjust settings to achieve higher frame rates.

GPU Role

The AMD Radeon RX 6800 XT is the dominant component in this pairing, and its characteristics directly determine the system’s performance ceiling, especially at higher resolutions. The GPU is based on the RDNA 2.0 architecture with 4608 shading units and a boost clock of 2250 MHz. It is equipped with 16 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 512.0 GB/s. This memory configuration is more than adequate for The Technomancer, as the game’s assets are unlikely to exceed even a fraction of that capacity, preventing any potential memory-related stuttering.

The GPU’s role is clearly defined by the resolution scaling data. At 1080p and 1440p, the RX 6800 XT is able to render frames quickly, and the performance is limited by the CPU or game engine. However, at 4K, the GPU becomes the definitive bottleneck. The drop from 75 FPS on Low to 39.3 FPS on Ultra at 4K shows a 47.6% decrease in performance, which is a direct result of the increasing pixel shader workload. The GPU’s FP32 performance of 20.74 TFLOPS is the key metric here, as it dictates how quickly it can process the complex shaders and lighting calculations required by the game. While the 16 GB of VRAM offers future-proofing, the core compute capabilities of the RX 6800 XT are what limit the system at 4K, making it a strong choice for 1440p gaming but only a moderate one for 4K enthusiasts.