The Technomancer

The AMD Ryzen 9 5900X and NVIDIA GeForce RTX 5080 combination delivers a strong performance profile in The Technomancer, with measured frame rates that scale predictably across resolutions and settings. The data indicates a system that is well-balanced for this 2016 Action RPG, though the limiting factor shifts depending on the graphical load. The CPU’s 12 cores and 24 threads, based on the Zen 3 architecture, provide ample processing headroom, while the GPU’s 16 GB of GDDR7 memory ensures the game’s assets are handled without issue. Benchmark results show this pairing ranks 75th out of 1,656 tested combos, placing it in the top 4.5% of all configurations.

CPU Role

The AMD Ryzen 9 5900X is a 12-core, 24-thread processor with a base clock of 3.70 GHz and a boost clock of 4.80 GHz. This high core count is rarely fully utilized by The Technomancer, which was released in 2016 and is not known for extreme multi-threading demands. However, the strong single-thread performance, evidenced by a 3DMark single-thread score of 941 and a Cinebench R23 single-core score of 4,680, is crucial for maintaining high frame rates in game logic and physics. The CPU also holds an average benchmark score of 39,453, which places it at the 90th percentile of all CPUs, indicating it outperforms the vast majority of processors in general compute tasks.

Compared to its nearest rivals, the 5900X shows a negligible performance gap. It scores 0.2% higher than the AMD EPYC 4245P, which has an average score of 39,383, and 0.9% higher than the Intel Core i7-13700F, which scores 39,095. Conversely, it trails the Intel Core i7-13700 by 1% (39,857) and the AMD Ryzen 7 PRO 8845HS by 0.7% (39,747). In the context of this game, these differences are minor. The CPU’s 64 MB of L3 cache is a significant asset, as it reduces latency when accessing frequently used data, which helps maintain consistent frame pacing even in complex scenes. The measured frame rates at 1080p, where the CPU load is relatively higher, confirm that this processor is not a bottleneck, as the system achieves over 250 FPS on low settings.

GPU Role

The NVIDIA GeForce RTX 5080, built on the Blackwell 2.0 architecture, is the primary driver of graphical performance in this configuration. It features 16 GB of GDDR7 memory on a 256-bit bus, providing a memory bandwidth of 960.0 GB/s. This is ample for The Technomancer, whose textures and effects are well within the capacity of this memory pool. The GPU’s boost clock of 2617 MHz, combined with its 10,752 shading units, delivers substantial raw compute power, reflected in a Passmark G3D score of 36,565. This score places the GPU at the 89th percentile of all graphics cards.

The RTX 5080’s average benchmark score of 59,188 is competitive with its nearest rivals, though the deltas are more pronounced than with the CPU. It performs 1.6% better than the Intel Arc A570M (58,239) and 2.5% better than the Intel Arc A580 (57,756). However, it is 1.9% behind the Intel Arc Pro A60 (60,326) and 2.6% ahead of the AMD Radeon Pro W5500X (57,661). These comparisons are based on synthetic benchmarks, but in-game data shows the RTX 5080 handles the graphical demands of The Technomancer with ease. The GPU’s 112 ROPs ensure efficient pixel output, which is critical for high-resolution rendering. The card’s 16-pin power connector and 360 W TDP are consistent with a high-end component, and its performance in this title suggests it is not being pushed to its limits until the highest settings are applied.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern as resolution increases. At 1920x1080, the system is largely CPU-bound, achieving an average of 251.8 FPS on low settings and 206.7 FPS on high. Moving to 2560x1440, the frame rates drop noticeably: low settings yield 205 FPS and high settings produce 135.3 FPS. At 3840x2160, the load shifts decisively to the GPU, with low settings averaging 109.6 FPS and high settings dropping to 76.7 FPS. This scaling indicates that the RTX 5080 becomes the limiting component at 4K, while the Ryzen 9 5900X provides sufficient headroom at lower resolutions.

The percentage drop from 1080p to 4K is substantial. For high settings, the average FPS falls from 206.7 to 76.7, a reduction of approximately 63%. For low settings, the drop is from 251.8 to 109.6, a decrease of about 56%. This pattern is typical for a high-end GPU paired with a strong CPU: the performance degradation from 1080p to 4K is steep, but the absolute numbers remain playable. At 1440p, the system hits a sweet spot, with high settings achieving 135.3 FPS, which is likely the target for users seeking high refresh rates. The data shows that the GPU’s memory bandwidth and processing power are the key factors at higher resolutions, as the CPU’s influence on frame rates diminishes.

Settings Recommendations

The measured rows provide a clear view of how each settings preset impacts performance. At 1080p, the Ultra preset delivers an average of 161.3 FPS, which is still exceptionally smooth. However, the jump from High (206.7 FPS) to Ultra (161.3 FPS) represents a 22% performance cost. At 1440p, the Ultra preset (108.1 FPS) remains playable, but the High preset (135.3 FPS) offers a better balance, providing a 25% performance improvement with likely minimal visual difference. At 4K, the Ultra preset drops to 59.4 FPS, which is just at the threshold of smooth gameplay, while High (76.7 FPS) is more comfortable.

For the best experience, the High preset at 2560x1440 appears optimal. It delivers 135.3 FPS, which is well above the 60 FPS threshold and leaves room for high refresh rate monitors. At 4K, the High preset (76.7 FPS) is recommended over Ultra (59.4 FPS), as the frame rate improvement is significant and the visual fidelity loss is typically minimal in The Technomancer. The Medium preset at 1080p (228.9 FPS) and 1440p (157.3 FPS) are also viable options for users prioritizing maximum frame rates. The Low preset, while producing the highest frame rates (251.8 FPS at 1080p), is not recommended for general play, as the visual downgrade is likely to be noticeable. The data suggests that High settings provide the best balance between image quality and performance across all resolutions.

How This Combo Ranks

This combination of the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 5080 ranks 75th out of 1,656 tested combos in The Technomancer. This places it in the top 4.5% of all configurations, indicating a very high level of performance. The rank is a composite measure of both CPU and GPU capabilities, and this pairing benefits from having no obvious weak link. The CPU’s 90th percentile standing and the GPU’s 89th percentile standing are both strong, and their combined performance is greater than the sum of their parts due to the balanced nature of the system.

The rank suggests that this setup outperforms the vast majority of other tested combinations, including those with higher-end CPUs or GPUs that may be paired with less suitable counterparts. The relatively small deltas between the 5900X and its nearest CPU rivals, and the RTX 5080 and its nearest GPU rivals, indicate that the system is well-optimized for this game. The data shows that the 5900X’s strong single-thread performance and the RTX 5080’s high memory bandwidth create a synergistic effect, allowing the system to maintain high frame rates even at demanding settings. While the rank is not the absolute top, the performance margin over the median combo is substantial, making this a high-tier configuration for The Technomancer.