The Technomancer

The Technomancer, a 2016 Action RPG, presents an interesting test for modern hardware. This analysis examines the AMD Ryzen 7 7700 and AMD Radeon RX 7700 XT combination, using measured frame rate data to understand its performance profile. The data reveals a system that scales predictably with resolution and settings, offering a clear picture of its capabilities in this specific title.

FAQ

Q: What is the average frame rate at 1080p with Ultra settings?

A: The AMD Radeon RX 7700 XT achieves an average of 99.9 FPS at 1920x1080 with Ultra settings. This is the most demanding preset at this resolution, yet it remains comfortably above the 60 FPS threshold for smooth gameplay.

Q: How much performance drops when moving from 1080p to 4K at High settings?

A: At High settings, the average frame rate falls from 130.6 FPS at 1080p to 82.3 FPS at 1440p, and finally to 47.9 FPS at 2160p. This represents a significant 63% reduction in average FPS from 1080p to 4K, indicating the GPU becomes the primary bottleneck at higher resolutions.

Q: What is the best performance scenario for this combo?

A: The highest average frame rate recorded is 193.6 FPS, achieved at 1920x1080 with Low settings. This suggests that for competitive play or high refresh rate monitors, dropping to Low settings at 1080p yields the most responsive experience.

Q: Is the CPU or GPU the limiting factor in The Technomancer?

A: The data suggests the GPU is the limiting factor at higher resolutions. For instance, at 4K Ultra, the average FPS drops to 38.1, while at 1080p Low, it reaches 193.6. The large performance delta across resolutions points to the graphics card being the primary constraint.

Q: How does the RX 7700 XT compare to its closest rival in synthetic benchmarks?

A: The RX 7700 XT has an average benchmark score of 30097, which is nearly identical to the NVIDIA GeForce RTX 5060, which scores 30109. The deltaPct between them is 0%, indicating they perform at a statistical tie in these aggregate tests.

Q: What is the Ryzen 7 7700's percentile ranking among all CPUs?

A: The Ryzen 7 7700 sits in the 91st percentile of all CPUs, based on its average benchmark score of 40468. This places it in the top tier of processors, indicating strong multi-threaded and single-threaded performance capabilities.

GPU Role

The AMD Radeon RX 7700 XT is a substantial piece of silicon, built on the RDNA 3.0 architecture with a 5 nm process. It features 12 GB of GDDR6 memory on a 192-bit bus, providing a memory bandwidth of 432.0 GB/s. The GPU's boost clock is rated at 2544 MHz, with a game clock of 2171 MHz, which are key factors in its raw rendering throughput.

In The Technomancer, the GPU's role is clearly dominant, particularly as resolution increases. The measured FPS data shows a clear scaling pattern: at 1080p, the system achieves high frame rates across all settings, but at 4K, the frame rates drop significantly. For example, at 1080p High, the average FPS is 130.6, but at 4K High, it falls to 47.9. This indicates that the RX 7700 XT's raw pixel-pushing power is the main driver of performance in this game, and the demands of 4K rendering heavily tax its capabilities.

The 12 GB VRAM capacity is likely sufficient for this title, even at 4K with High settings, given the game's age. However, the performance drop at 4K suggests that memory bandwidth or compute throughput becomes a limiting factor. The GPU's 35.17 TFLOPS of FP32 performance is a theoretical peak, and the measured results show how this translates into real-world frame rates. The data shows a clear hierarchy where the GPU is the bottleneck at 4K, while at 1080p, the CPU is more capable of keeping up, resulting in higher frame rates.

Resolution Scaling

The measured FPS data provides a clear picture of how The Technomancer's performance scales with resolution. The frame rate drops are not linear, but rather exponential, as the pixel count increases. This is a classic sign of GPU-bound performance.

At 1080p, the system is highly performant. The average FPS at High settings is 130.6, which is well above the threshold for high-refresh-rate displays. Moving to 1440p, the average FPS at High settings drops to 82.3, a 37% decrease. This is still a very playable frame rate for most users. However, the jump to 4K is the most punishing. At 2160p with High settings, the average FPS plummets to 47.9, a 42% drop from 1440p and a 63% drop from 1080p.

This scaling pattern strongly suggests that the limiting component at higher resolutions is the GPU. The CPU's performance is relatively constant across resolutions, so the massive frame rate differences can only be attributed to the graphics card's workload. The data indicates that for 4K gaming, users would need to significantly lower settings to achieve a smooth experience. The drop from 47.9 FPS at High to 38.1 FPS at Ultra at 4K further confirms this, as the GPU is struggling to maintain frame rates under the increased graphical load.

Measured FPS Breakdown

The benchmark results for The Technomancer present a complete matrix of performance across three resolutions and four quality presets. The data is measured, not estimated, and shows the following:

At 1920x1080, the system excels. With Low settings, it achieves an average of 193.6 FPS. This is the highest frame rate recorded in the entire dataset. Moving to Medium settings, the average FPS is 148.7, which is still exceptionally high. At High settings, the average is 130.6 FPS, and at Ultra, it remains strong at 99.9 FPS. All 1080p presets deliver a smooth experience, with even the most demanding settings staying above the 90 FPS mark.

At 2560x1440, the performance remains solid but shows the GPU beginning to work harder. With Low settings, the average FPS is 127.6. The Medium preset sees a reduction to 100.6 FPS. High settings produce an average of 82.3 FPS, and Ultra drops to 67.8 FPS. This resolution offers a good balance, with all presets except Ultra staying comfortably above the 80 FPS mark.

At 3840x2160, the GPU is heavily taxed. With Low settings, the average FPS is 69.2. The Medium preset drops to 54.9 FPS, and High settings yield 47.9 FPS. The most demanding preset, Ultra, brings the average down to 38.1 FPS. This data shows that 4K gaming is only viable with lower settings, and even then, achieving a consistent 60 FPS is not possible with this hardware in this title.

CPU Role

The AMD Ryzen 7 7700 is a powerful 8-core, 16-thread processor based on the Zen 4 architecture. It has a base clock of 3.80 GHz and a boost clock of 5.30 GHz. In synthetic benchmarks, it shows strong performance, with a Cinebench R23 multi-core score of 29302 and a single-core score of 4136. Its average benchmark score of 40468 places it in the 91st percentile of all CPUs.

In The Technomancer, the CPU's role is to feed the GPU with data and handle game logic. The benchmark data suggests that this processor is more than capable of handling the game's demands. This is evidenced by the fact that at 1080p, where the GPU is less likely to be the bottleneck, the frame rates are extremely high. For instance, at 1080p Low, the system achieves 193.6 FPS. This high frame rate indicates that the CPU is not holding back performance at lower resolutions.

The CPU's performance is further contextualized by its nearest rivals. It scores 0.1% higher than the AMD Ryzen 9 7940H and 1.2% higher than the Intel Core Ultra 5 235T. This places it in a competitive position. However, the game's performance scaling from 1080p to 4K shows that the GPU becomes the limiting factor as resolution increases. The CPU's strong multi-threaded performance, as shown by its 29302 Cinebench R23 multi-core score, ensures that it can handle the game's logic and physics without bottlenecking the GPU in most scenarios. The data indicates that the Ryzen 7 7700 is a solid match for the RX 7700 XT in this title, providing ample headroom for the GPU to operate.