The Technomancer

The Technomancer, a 2016 Action RPG, presents an unusual pairing with the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 5090 D. The benchmark data shows this combination ranks 84th out of 2825 tested combos, placing it in the top 3% of all configurations. With average FPS ranging from 66 at 4K Ultra to 248 at 1080p Low, this system delivers consistently high frame rates across every tested setting. The RTX 5090 D, with its 32 GB of GDDR7 memory and 1.79 TB/s bandwidth, dominates the GPU workload, while the Ryzen 7 5800X provides solid multi-threaded performance with its 8 cores and 16 threads. This analysis breaks down the measured results, component roles, and scaling behavior.

FAQ

Q: What is the overall performance rank of this CPU and GPU combination in The Technomancer?

A: The combo ranks 84th out of 2825 tested combinations. This places it in the top 3% of all configurations, indicating that the Ryzen 7 5800X and RTX 5090 D together deliver near-elite performance in this game.

Q: How does the RTX 5090 D compare to its nearest GPU rivals in synthetic benchmarks?

A: The RTX 5090 D has an average benchmark score of 77712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76904). It trails the AMD Radeon RX 6850M XT by 1.6% (78940), the NVIDIA Tesla P100 PCIe 12 GB by 2.1% (79396), and the NVIDIA Tesla P100 PCIe 16 GB by 2.4% (79605). The data shows the 5090 D sits slightly below these rivals in raw compute tests despite its massive memory capacity.

Q: What is the highest average FPS achieved in The Technomancer with this combo?

A: The highest average FPS is 248, recorded at 1920x1080 with Low settings. At the same resolution with Medium settings, the average is 226 FPS, and with High settings it reaches 213 FPS. Even at Ultra settings on 1080p, the combo maintains 184 FPS, showing that the game rarely stresses this hardware at lower resolutions.

Q: How does frame rate drop when moving from 1080p to 4K at High settings?

A: At High settings, the average FPS falls from 213 at 1920x1080 to 154 at 2560x1440, then to 85 at 3840x2160. This represents a 60.1% reduction from 1080p to 4K. The scaling pattern suggests the GPU becomes the primary bottleneck at higher resolutions due to the increasing pixel workload.

Q: What are the CPU’s multi-threaded benchmark scores for the Ryzen 7 5800X?

A: The Ryzen 7 5800X scores 15476 in Cinebench R23 multicore, 2608.5 in Cinebench R15 multicore, and 27732 in Passmark multithread. Its 3DMark 16-thread score is 7586, while the max-thread score is 7578. These figures reflect the processor’s 8-core, 16-thread configuration with a boost clock of 4.70 GHz.

Q: Does the RTX 5090 D have enough VRAM for this game’s demands?

A: The RTX 5090 D features 32 GB of GDDR7 memory on a 512-bit bus, providing 1.79 TB/s of bandwidth. The Technomancer, being a 2016 title, does not require anywhere near this capacity, so VRAM is not a limiting factor. The data shows that even at 4K Ultra, the combo achieves 66 FPS, indicating memory bandwidth is more than sufficient.

GPU Role

The NVIDIA GeForce RTX 5090 D is the dominant component in this pairing, and the measured FPS data reflects its overwhelming influence on The Technomancer’s performance. The GPU’s boost clock of 2407 MHz and base clock of 2017 MHz drive its 21760 shading units, 680 texture mapping units, and 176 raster output units. With a pixel rate of 423.6 GPixel/s and a texture rate of 1,636.8 GTexel/s, the card processes geometry and pixel data at exceptional speed, which directly translates to the high frame rates observed across all resolution and settings combinations.

The 32 GB of GDDR7 memory operates at 1750 MHz with an effective 28 Gbps transfer rate, delivering 1.79 TB/s of bandwidth over a 512-bit interface. For a game released in 2016, this memory subsystem is massively overprovisioned. The Technomancer’s texture and asset sizes are modest by modern standards, so the RTX 5090 D never approaches its memory capacity limits. Instead, the bottleneck at higher resolutions shifts to the GPU’s compute throughput. At 4K Ultra, the average FPS drops to 66, which is still playable but shows the raw pixel fill demands of 3840x2160 resolution with maximum settings. The FP32 performance of 104.8 TFLOPS and FP16 of 104.8 TFLOPS (1:1) provide the mathematical muscle for the game’s shading and post-processing effects, though the 2016 engine likely does not leverage these capabilities fully.

The RTX 5090 D’s average benchmark score of 77712 places it in the 92nd percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6650M XT (1.1% slower), AMD Radeon RX 6850M XT (1.6% faster), and two NVIDIA Tesla P100 variants (2.1% and 2.4% faster). These deltas are small, indicating that the 5090 D’s synthetic performance is competitive with high-end workstation and gaming cards. However, in The Technomancer specifically, the GPU’s architectural strengths—particularly its massive bandwidth and high texture rate—ensure that frame rates remain high even when the CPU might otherwise struggle. The data shows that at 1080p Low, the combo hits 248 FPS, which is likely near the engine’s internal limits rather than a hardware ceiling.

How This Combo Ranks

The combination of AMD Ryzen 7 5800X and NVIDIA GeForce RTX 5090 D achieves a rank of 84 out of 2825 tested combos in The Technomancer. This is a top-tier result, placing the configuration in the 97th percentile. The ranking reflects the synergistic balance between the CPU’s strong single-threaded performance and the GPU’s overwhelming rasterization power. While the 5800X is not the newest processor, its Zen 3 architecture with a boost clock of 4.70 GHz provides sufficient instruction throughput to feed the RTX 5090 D in most scenarios.

Comparing to the CPU’s nearest rivals, the Ryzen 7 5800X has an average benchmark score of 29123, with a percentile of 81 among all CPUs. The Intel Core Ultra 5 135H is 0.1% faster, the Intel Xeon Phi 7210 is 0.4% faster, and the Intel Core i5-13500HX is 0.5% faster. The AMD Ryzen 5 5600XT is 0.6% slower. These deltas are minimal, meaning the 5800X’s CPU performance is essentially on par with several mid-range and high-end processors from different generations. In The Technomancer, which is not heavily multithreaded, this CPU performance is sufficient to avoid bottlenecking the GPU at lower resolutions. The combo’s high rank of 84 suggests that the pairing outperforms the vast majority of tested systems, many of which likely use less powerful GPUs.

The rank also indicates that the RTX 5090 D is the primary driver of this system’s standing. With a GPU percentile of 92, the graphics card is in the top 8% of all GPUs, and its combination with a mid-high-tier CPU from 2020 creates a configuration that excels in this game’s measured scenarios. The data is measured, not estimated, which adds confidence to the rank’s validity. For a title like The Technomancer, where GPU load dominates at higher resolutions, the 5090 D’s hardware resources are more than adequate to push the combo into elite territory.

Measured FPS Breakdown

The measured FPS data covers three resolutions (1920x1080, 2560x1440, 3840x2160) and four settings levels (Low, Medium, High, Ultra), providing a comprehensive view of performance. At 1080p, the combo delivers exceptional frame rates: 248 FPS on Low, 226 FPS on Medium, 213 FPS on High, and 184 FPS on Ultra. The Medium setting includes a minimum FPS of 192 and a maximum of 259, showing some variance but still maintaining a high floor. These numbers suggest that at 1080p, the game is likely CPU-limited or engine-limited, as the RTX 5090 D’s raw power cannot push beyond these figures due to the game’s 2016-era code.

Moving to 2560x1440, the average FPS drops noticeably but remains high: 215 FPS on Low, 180 FPS on Medium (with min 153 and max 207), 154 FPS on High, and 120 FPS on Ultra. The scaling from 1080p to 1440p at Low settings is 13.3% lower, while at Ultra settings it is 34.8% lower. This indicates that the GPU is beginning to take on more workload as resolution increases. At 1440p Ultra, the 120 FPS average is still well above typical refresh rates, making this an excellent resolution for high-refresh monitors.

At 3840x2160, the performance drops further: 129 FPS on Low, 99 FPS on Medium (with min 84 and max 114), 85 FPS on High, and 66 FPS on Ultra. The 4K Ultra result of 66 FPS is the lowest average in the dataset, but it remains playable. The gap between Low and Ultra at 4K is 63 FPS, or 48.8%, which is larger than the 64 FPS difference at 1080p (20.5% reduction from Low to Ultra). This widening gap confirms that the GPU’s compute resources are the limiting factor at 4K, especially with higher settings that increase pixel shading and texture filtering workloads. The Medium setting at 4K shows a min FPS of 84, which is still above the 60 FPS threshold, indicating that even with some frame drops, the experience remains smooth.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals the nature of the bottleneck in The Technomancer. At Low settings, the average FPS drops from 248 at 1080p to 215 at 1440p (13.3% decrease) and then to 129 at 4K (48.0% decrease from 1440p). This steep drop at 4K indicates that the GPU’s pixel processing capability becomes the limiting factor. The RTX 5090 D’s pixel rate of 423.6 GPixel/s is high, but rendering 3840x2160 pixels requires 8.3 million pixels per frame, and at 129 FPS that translates to over 1 billion pixels per second—a substantial workload.

At Ultra settings, the scaling is more dramatic: 184 FPS at 1080p, 120 FPS at 1440p (34.8% reduction), and 66 FPS at 4K (45.0% reduction from 1440p). The total reduction from 1080p Ultra to 4K Ultra is 64.1%. This larger percentage drop compared to Low settings suggests that higher settings amplify the GPU’s workload, particularly through increased draw distances, shadow complexity, and post-processing effects. The data shows that the CPU’s role diminishes as resolution increases; at 1080p, the 5800X’s single-thread performance (Passmark single-thread score of 3445) likely keeps up with the GPU, but at 4K, the GPU’s compute throughput is the primary constraint.

The Medium settings provide the most granular data with min and max FPS values. At 1080p, the min is 192 and max is 259, giving a spread of 67 FPS. At 1440p, the min is 153 and max is 207, a spread of 54 FPS. At 4K, the min is 84 and max is 114, a spread of 30 FPS. This narrowing variance at higher resolutions indicates that frame times become more consistent when the GPU is fully saturated, whereas at 1080p, the CPU or other system components may cause occasional hitches. The overall pattern suggests that the limiting component at 1080p is the game engine or CPU, while at 4K it is unambiguously the GPU.

CPU Role

The AMD Ryzen 7 5800X is a Zen 3 architecture processor built on TSMC’s 7 nm process, with 8 cores and 16 threads. Its base clock of 3.80 GHz and boost clock of 4.70 GHz provide strong single-threaded performance, as evidenced by its Cinebench R23 single-core score of 1574.5 and Geekbench single-core score of 2032. In The Technomancer, which was released in 2016 and likely does not utilize more than a few cores, the 5800X’s single-thread capabilities are more important than its multicore throughput.

The CPU’s cache hierarchy includes 64 KB of L1 per core, 512 KB of L2 per core, and 32 MB of L3 cache. This large L3 cache helps reduce memory latency, which can be beneficial in game workloads that access shared data. The processor supports DDR4 memory with dual-channel configuration and a bandwidth of 51.2 GB/s, which is modest compared to the GPU’s 1.79 TB/s. However, for a game like The Technomancer, the CPU’s memory bandwidth is unlikely to be a bottleneck because the game’s data footprint is small relative to modern titles.

In terms of synthetic benchmarks, the 5800X scores 7586 in 3DMark 16-thread and 7578 in 3DMark max-thread, indicating consistent scaling across thread counts. Its Cinebench R15 multicore score of 2608.5 and R23 multicore score of 15476 place it above many older processors. The Passmark multithread score of 27732 and integer math score of 94969 show strong computational throughput. However, the nearest rivals—Intel Core Ultra 5 135H, Intel Xeon Phi 7210, Intel Core i5-13500HX, and AMD Ryzen 5 5600XT—all have average scores within 0.6% of the 5800X, suggesting that this CPU’s performance is not exceptional but is competitive with modern mid-range parts.

In this game, the CPU’s role is to feed the GPU with draw calls, physics calculations, and game logic. The 5800X’s boost clock of 4.70 GHz ensures rapid single-thread execution, which is critical for maintaining high FPS at 1080p where the GPU is less stressed. The data shows that at 1080p Low, the combo hits 248 FPS, which is likely near the engine’s limit; the CPU’s 3DMark single-thread score of 943 and Passmark single-thread score of 3445 indicate it can handle the game’s single-threaded tasks without becoming a bottleneck. At 4K, the CPU’s role diminishes, as the GPU’s rendering workload dominates. The measured FPS at 4K Ultra (66 FPS) is more than double the 1080p Ultra result (184 FPS) even though the CPU is identical, confirming that the GPU is the limiting component at higher resolutions.