The Technomancer

Settings Recommendations

The measured frame rate data for The Technomancer with the AMD Ryzen 7 5800X and NVIDIA GeForce RTX 3070 Ti combination shows a clear hierarchy across the four available presets. At 1920x1080, the High preset delivers 131.1 FPS average, which is a substantial 28.2 FPS improvement over the Ultra preset's 102.3 FPS. The Medium preset sits between them at 158.8 FPS, while Low reaches 204.2 FPS. Given that High provides a 28.8 FPS advantage over Ultra while maintaining the same resolution, the High preset represents the optimal balance for most usage scenarios.

Moving to 2560x1440, the pattern shifts slightly. High delivers 84.2 FPS, which remains comfortably above the 66.3 FPS achieved by Ultra. The 17.9 FPS difference between these two presets at this resolution is proportionally similar to the 1080p gap, but the absolute numbers are lower. Medium at 98.4 FPS and Low at 129 FPS continue the trend, but the High preset's 84.2 FPS is the lowest setting that still exceeds the 60 FPS threshold for smooth gameplay.

At 3840x2160, the choice becomes more constrained. High produces 48.4 FPS, which is below the 60 FPS target but still playable. Medium achieves 56 FPS, while Low reaches 74.8 FPS. Ultra drops to 34.6 FPS, which is a significant 13.8 FPS reduction from High. The data indicates that at 4K, the Medium preset provides the highest frame rate that remains close to playable fluidity, while High offers a marginal visual improvement at the cost of 7.6 FPS. For users prioritizing consistent frame delivery at 4K, Medium is the recommended preset; for those who accept lower frame rates in exchange for visual fidelity, High is the ceiling before performance degrades sharply.

GPU Role

The NVIDIA GeForce RTX 3070 Ti features 8 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 608.3 GB/s. The GPU's base clock is 1575 MHz with a boost clock of 1770 MHz. These specifications directly influence the measured performance in The Technomancer, particularly at higher resolutions where memory bandwidth and capacity become more critical.

The benchmark results show a consistent relationship between GPU load and frame rate across resolutions. At 1920x1080, the RTX 3070 Ti produces 131.1 FPS on High settings, which suggests the GPU is not fully saturated at this resolution. The jump to 204.2 FPS on Low settings further confirms that the GPU has headroom at 1080p. However, at 3840x2160, the same GPU delivers only 48.4 FPS on High, indicating that the 8 GB VRAM buffer and memory bandwidth are becoming limiting factors.

The GPU's 74th percentile ranking among all tested GPUs places it in the upper-midrange tier. Its nearest rival, the AMD Radeon RX 590 GME, scores 0.3% higher in average benchmark score, while the AMD Radeon RX 6700 trails by 0.8%. This narrow margin suggests the RTX 3070 Ti is tightly clustered with these competitors in general compute performance, but The Technomancer's specific workload characteristics may favor one architecture over another. The 21.75 TFLOPS FP32 compute throughput and 169.9 GPixel/s pixel rate are the raw processing capabilities that drive the observed frame rates, but the game's optimization for NVIDIA hardware is evident in the scaling from 1080p to 4K.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases. At High settings, the transition from 1920x1080 to 2560x1440 results in a drop from 131.1 FPS to 84.2 FPS, a reduction of 46.9 FPS or approximately 35.8%. Moving from 2560x1440 to 3840x2160 further reduces frame rate to 48.4 FPS, another 35.8 FPS decline. The cumulative drop from 1080p to 4K at High settings is 82.7 FPS, meaning the 4K performance is only 36.9% of the 1080p performance.

Low settings exhibit a similar but steeper curve: 204.2 FPS at 1080p drops to 129 FPS at 1440p (a 75.2 FPS reduction) and then to 74.8 FPS at 4K (a 54.2 FPS reduction). The total decline from 1080p to 4K on Low is 129.4 FPS, leaving 4K performance at 36.6% of 1080p. This consistency across presets suggests that the scaling factor is driven primarily by resolution rather than settings, pointing to the GPU as the primary bottleneck at higher resolutions.

The data indicates that the CPU-Ryzen 7 5800X with 8 cores and 16 threads-is not the limiting component at any resolution. The 5800X's 84th percentile ranking among all CPUs and its Cinebench R23 multi-core score of 23571 provide ample processing headroom. The frame rate drops from 1080p to 4K align with the GPU's memory bandwidth limitations, as the 608.3 GB/s bandwidth is increasingly strained by the pixel throughput required at 3840x2160. The 34.6 FPS at 4K Ultra versus 102.3 FPS at 1080p Ultra further emphasizes that the RTX 3070 Ti's 8 GB VRAM is the constraining factor in this combination.

FAQ

Q: What is the best preset for 1920x1080 gaming with this combination?

A: The High preset delivers 131.1 FPS at 1080p, which is 28.8 FPS higher than Ultra's 102.3 FPS. Given the marginal visual difference between High and Ultra, High provides the best frame rate-to-quality ratio at this resolution.

Q: Can this combination maintain 60 FPS at 2560x1440?

A: Yes, the High preset achieves 84.2 FPS and the Medium preset reaches 98.4 FPS at 1440p. Even the Ultra preset with 66.3 FPS exceeds the 60 FPS threshold, making all presets viable at this resolution.

Q: Is the Ryzen 7 5800X bottlenecking the RTX 3070 Ti in The Technomancer?

A: No. The CPU's 84th percentile ranking and high multi-threaded scores (Cinebench R23: 23571) provide sufficient headroom. The frame rate scaling from 1080p to 4K follows GPU-bound behavior, not CPU limitations.

Q: How does the RTX 3070 Ti's 8 GB VRAM affect 4K performance?

A: At 3840x2160, the High preset drops to 48.4 FPS and Ultra to 34.6 FPS. The steep decline from 1440p suggests the 8 GB GDDR6X buffer and 608.3 GB/s bandwidth are insufficient for smooth 4K gameplay at higher settings.

Q: What is the expected performance difference between Low and Ultra settings at 1080p?

A: Low produces 204.2 FPS while Ultra produces 102.3 FPS, a difference of 101.9 FPS. This indicates that the RTX 3070 Ti has substantial headroom at 1080p, even at maximum settings.

Q: How does this combination compare to similar hardware in overall performance?

A: The combo ranks 676th out of 1656 tested combinations. The CPU's nearest rival, the AMD Ryzen 7 5800, is only 0.3% faster in average score, while the GPU's closest competitor, the AMD Radeon RX 590 GME, is 0.3% ahead.

How This Combo Ranks

The AMD Ryzen 7 5800X and NVIDIA GeForce RTX 3070 Ti combination ranks 676th out of 1656 tested combinations in The Technomancer, placing it in the 40.8th percentile of all combos tested. This position reflects a balanced pairing where the CPU's 84th percentile ranking and the GPU's 74th percentile ranking combine to produce mid-pack performance in this specific game.

The CPU's benchmark profile shows the Ryzen 7 5800X achieving an average score of 27606, with its nearest rival, the AMD Ryzen 7 5800, scoring 27535 (0.3% lower). The Intel Core i5-12600KF trails by 0.8%, while the AMD Ryzen 5 8500GE is 0.4% behind. This tight clustering indicates that the 5800X's 8-core, 16-thread configuration with 32 MB of L3 cache is competitive with contemporary alternatives, though not dominant.

The GPU's average benchmark score of 30849 places it in a similarly tight cluster. The AMD Radeon RX 590 GME scores 30755 (0.3% higher), while the AMD Radeon RX 6700 scores 31112 (0.8% higher). The NVIDIA Quadro M5000 and GRID M60-1Q are within 1.2% of the RTX 3070 Ti's score. This grouping suggests that in general compute, the RTX 3070 Ti is not significantly ahead of its nearest rivals, but The Technomancer's specific rendering requirements may favor its Ampere architecture.

The rank of 676 out of 1656 implies that approximately 980 combinations perform better in this game, indicating that while this pairing is competent, it is not among the top performers. The measured FPS data confirms this assessment: at 1080p High, the combination achieves 131.1 FPS, which is strong for mainstream gaming but not exceptional for a high-end setup. The 4K Ultra result of 34.6 FPS underscores that this combination is better suited for 1080p and 1440p gaming rather than 4K at maximum settings. The combination's position in the overall ranking reflects a capable but not top-tier configuration for The Technomancer, with the CPU providing more headroom than the GPU at higher resolutions.