The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload that scales significantly with resolution and graphical fidelity. When paired with the AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 2060 SUPER, the benchmark data reveals a configuration that is highly capable at 1080p but struggles to maintain playable frame rates at 4K Ultra. This analysis breaks down the measured performance, examining the roles of the CPU and GPU in shaping the gaming experience.

Resolution Scaling

The frame rate data shows a steep performance curve as resolution increases from 1920x1080 to 3840x2160. At High settings, the average FPS starts at 94.4 at 1080p, drops to 60.5 at 2560x1440, and falls further to 31.4 at 4K. This represents a substantial 67% reduction in frame rate from 1080p to 4K. The trend is consistent across all settings presets, indicating that the rendering load scales almost linearly with pixel count.

This scaling pattern strongly suggests that the system becomes GPU-limited at higher resolutions. The RTX 2060 SUPER, with its 8 GB of GDDR6 memory and 448.0 GB/s bandwidth, is the primary bottleneck when pushing 4K resolution. The data shows that even at Low settings, the 4K average of 49.2 FPS is barely half of the 1080p Low result of 143.6 FPS. The gap between Low and Ultra settings widens dramatically at higher resolutions, with the 4K Ultra score of 23.5 FPS being less than half of the 4K Low score. This indicates that the GPU’s processing power and memory bandwidth are exhausted by the combination of high pixel count and complex shading.

CPU Role

The AMD Ryzen 7 5700X3D provides a robust foundation for gaming with its 8 cores and 16 threads based on the Zen 3 architecture. Its boost clock of 4.10 GHz, combined with a large 96 MB shared L3 cache, ensures that it can keep up with the game’s logic and physics calculations. The CPU’s benchmark scores, such as the Cinebench R23 multicore score of 22366 and single-core score of 3157, demonstrate its strong performance. It also achieves a Passmark multithread score of 26318 and a single-thread score of 2970.

However, the measured FPS in The Technomancer suggests that the CPU is not the primary limiting factor. At 1080p Low, the system achieves 143.6 FPS, which is a high frame rate but still well below the CPU’s theoretical maximum throughput. The fact that frame rates drop consistently across all resolutions indicates that the GPU is the bottleneck. The processor’s 3DMark scores, including 6764 for 16 threads and 804 for single-thread, further confirm it has ample headroom to feed the GPU in this title. In this scenario, the CPU’s role is to maintain a stable frame delivery without introducing stutter, and the data suggests it does so effectively.

How This Combo Ranks

Within the benchmark database, this combination of the Ryzen 7 5700X3D and RTX 2060 SUPER ranks 1190 out of 1656 tested combos for The Technomancer. This places it in the 28th percentile of tested systems, indicating that it is a mid-to-lower tier performer for this specific game. The ranking reflects the GPU’s age and its limitations at higher resolutions and settings.

The GPU’s average benchmark score of 19774 puts it in the 63rd percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 2070, has a score of 19680, which is 0.5% lower. This shows that the RTX 2060 SUPER is very closely matched with the RTX 2070 in raw compute performance. The CPU’s average benchmark score of 24673 places it in the 82nd percentile of all CPUs, with its nearest rival, the Intel Core i7-1360P, scoring 24627, a negligible 0.2% difference. This combination of a strong CPU and a mid-range GPU explains why the overall combo rank is not higher; the system is held back by the graphics card in this GPU-intensive scenario.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across different configurations. At 1920x1080, the system is highly capable of delivering smooth gameplay. The average FPS ranges from 143.6 at Low settings to 73.2 at Ultra. High and Medium settings deliver 94.4 and 110.5 FPS, respectively, all of which would provide a fluid experience on a standard 60Hz or 144Hz monitor.

Moving to 2560x1440, the performance drops to more moderate levels. The average FPS at Low is 96, which is still very playable. High and Medium settings produce 60.5 and 71.6 FPS, respectively, which are adequate for most gaming scenarios. However, Ultra settings fall to 47.7 FPS, which may be below the threshold for a consistently smooth experience on high-refresh-rate displays.

At 3840x2160, the system struggles to maintain high frame rates. The average FPS at Low is 49.2, which is borderline playable. Medium settings yield 42.2 FPS, while High settings drop to 31.4 FPS. Ultra settings are the most demanding, with an average of only 23.5 FPS, which is generally considered too low for a playable experience in a fast-paced action RPG. The data shows that this combination is best suited for 1080p and 1440p gaming, with 4K reserved for lower graphical presets or less demanding titles.

GPU Role

The NVIDIA GeForce RTX 2060 SUPER is the defining component in this system’s gaming performance. Based on the Turing architecture and fabricated on a 12 nm process, it features 2176 shading units and 64 ROPs. Its boost clock of 1650 MHz and 8 GB of GDDR6 memory on a 256-bit bus provide a memory bandwidth of 448.0 GB/s. The GPU’s FP32 performance is 7.181 TFLOPS, and its texture rate is 224.4 GTexel/s.

The benchmark results clearly show that the GPU is the limiting factor in The Technomancer. The significant frame rate drops at 4K, across all settings, are a direct consequence of the GPU’s processing power and memory bandwidth being saturated. The game’s high-resolution textures and effects place a heavy load on the 8 GB VRAM, and the 448.0 GB/s bandwidth struggles to keep up with the data demands at 4K. While the GPU performs admirably at 1080p, its performance ceiling is reached at higher resolutions, making it the primary bottleneck in this configuration.

FAQ

Q: What is the best resolution to play The Technomancer with this hardware?

A: The data indicates 1920x1080 is the optimal resolution, with an average FPS of 94.4 at High settings and 143.6 at Low. At 2560x1440, performance is still viable, but Ultra settings drop to 47.7 FPS.

Q: Can this system handle 4K gaming in The Technomancer?

A: At 3840x2160, the system can only achieve an average of 49.2 FPS at Low settings. At High and Ultra settings, the frame rates fall to 31.4 and 23.5 FPS, respectively, making 4K gaming impractical for a smooth experience.

Q: Is the CPU or GPU the main bottleneck in this game?

A: The GPU is the primary bottleneck. The frame rate drops consistently with increasing resolution, while the CPU’s benchmark scores indicate it has ample headroom. The 8-core, 16-thread Ryzen 7 5700X3D with a 4.10 GHz boost clock is not the limiting component.

Q: How does the RTX 2060 SUPER compare to its nearest rival in terms of raw performance?

A: The RTX 2060 SUPER has an average benchmark score of 19774, which is 0.5% higher than the NVIDIA GeForce RTX 2070’s score of 19680. This indicates they are very closely matched in overall compute performance.

Q: What is the combo’s overall ranking among all tested systems for this game?

A: This specific combination of CPU and GPU ranks 1190 out of 1656 tested combos for The Technomancer. This places it in the lower half of the performance spectrum, reflecting the GPU’s limitations at high resolutions.

Q: What are the frame rates at 1440p Medium settings?

A: At 2560x1440 with Medium settings, the system delivers an average FPS of 71.6. This provides a good balance between visual quality and performance for most users.