The Technomancer

The Technomancer

AVERAGE FPS
113
good

This combination provides smooth gameplay with an average of 113 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 45 54 63 81
1440p QHD 80 102 114 150
1080p Full HD 117 155 181 214

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 81
3840x2160 Medium 63
3840x2160 High 54
3840x2160 Ultra 45
2560x1440 Low 150
2560x1440 Medium 114
2560x1440 High 102
2560x1440 Ultra 80
1920x1080 Low 214
1920x1080 Medium 181
1920x1080 High 155
1920x1080 Ultra 117

The Technomancer with AMD Ryzen 7 5700X3D + AMD Radeon RX 9070 XT, In-Depth Analysis

The Technomancer, a 2016 Action RPG, presents an interesting benchmark scenario for the AMD Ryzen 7 5700X3D paired with the AMD Radeon RX 9070 XT. The measured data reveals a configuration that scales predictably across resolutions, with the GPU heavily influencing performance at higher settings. This analysis breaks down the measured FPS, the role of the CPU, and the optimal settings for this specific combination.

Resolution Scaling

The performance drop from 1080p to 4K is substantial, clearly demonstrating the increasing load on the GPU at higher pixel counts. At High settings, the average frame rate falls from 155.1 FPS at 1920x1080 to 101.9 FPS at 2560x1440, representing a 34% reduction. Moving to 4K (3840x2160), the average drops further to 53.7 FPS, which is a 47% decrease from the 1440p figure and a 65% decrease from the 1080p baseline. This steep decline is typical of a game where the graphics card becomes the primary bottleneck as resolution increases.

The trend is consistent across all settings presets. At Low settings, the same resolution scaling shows a drop from 214 FPS at 1080p to 150.3 FPS at 1440p, and then to 81.4 FPS at 4K. The Ultra preset follows a similar pattern, starting at 116.5 FPS at 1080p, falling to 79.9 FPS at 1440p, and bottoming out at 45 FPS at 4K. The consistent percentage drops across all presets indicate that the scaling is not heavily dependent on the specific graphical workload, but rather on the raw pixel count and the GPU's ability to fill those pixels.

This scaling behavior suggests that the RX 9070 XT is the limiting component at 4K resolution. The 53.7 FPS average at High settings is playable but not ideal for a smooth experience, while the 45 FPS at Ultra is below the threshold many users consider acceptable. The gap between 1080p and 1440p performance is also notable; the GPU is still delivering high frame rates at 1440p, but the transition to 4K exposes its limitations in this title. The data indicates that the system is well-balanced at 1440p, where it can maintain high frame rates without being entirely CPU-bound.

CPU Role

The AMD Ryzen 7 5700X3D is a desktop processor with 8 cores and 16 threads, based on the Zen 3 architecture. Its base clock is 3.00 GHz, and it can boost up to 4.10 GHz. The processor's substantial 96 MB of shared L3 cache is a key feature of the X3D series, designed to improve gaming performance by reducing memory latency. In synthetic benchmarks, the CPU scores 22,366 in Cinebench R23 multi-core and 3,157 in single-core, placing it at the 82nd percentile among all CPUs.

While the CPU is powerful, the frame rate data in The Technomancer shows that its role is secondary to the GPU in most scenarios. At 1080p with Low settings, the system achieves 214 FPS, which is a very high frame rate that could potentially be limited by the CPU's single-thread performance. However, the processor's single-core score of 3,157 in Cinebench R23 is strong, and the high frame rates suggest it is keeping up with the GPU's output. The 3dmark_single_thread score of 804 and the 2_threads score of 1575 further indicate capable single-thread performance.

The CPU's multi-threaded capabilities, demonstrated by a 3dmark_max_threads score of 6,755 and a Passmark multithread score of 26,318, are more than sufficient for The Technomancer's demands. The game is not particularly known for being CPU-intensive, and the data confirms this. The performance scaling from Low to Ultra settings at 1080p shows a drop from 214 FPS to 116.5 FPS, which is a direct result of increased GPU load rather than a CPU bottleneck. At no point in the measured data does the CPU appear to be the primary limiter, as the frame rates scale consistently with resolution and settings in a manner that reflects GPU workload.

FAQ

Q: What is the average frame rate at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 101.9 FPS. This is a strong result, indicating that the combination can handle the game smoothly at this resolution and quality level.

Q: How does the Ultra preset at 4K compare to the High preset at 1080p?

A: The Ultra preset at 4K delivers an average of 45 FPS, while the High preset at 1080p delivers 155.1 FPS. This represents a 71% decrease in performance, highlighting the significant cost of running the game at maximum settings and resolution.

Q: Is the CPU a bottleneck in this game?

A: The data suggests not. The frame rates scale predictably with GPU load, and the CPU's high synthetic scores, such as 22,366 in Cinebench R23 multi-core, indicate it has ample headroom. The system achieves 214 FPS at 1080p Low settings, showing the CPU can handle high frame rates without limiting performance.

Q: What is the performance difference between Low and Ultra settings at 1080p?

A: At 1920x1080, the Low preset averages 214 FPS, while the Ultra preset averages 116.5 FPS. This is a 45% reduction in frame rate, demonstrating the substantial impact of the Ultra settings on the GPU workload.

Q: How does this system rank among all tested combos for this game?

A: The combination ranks 484 out of 1656 tested combos. This places it in the upper tier of configurations, indicating that it delivers better than average performance in The Technomancer.

Q: What is the performance at 4K with Medium settings?

A: At 3840x2160 with Medium settings, the average frame rate is 63 FPS. This is a playable frame rate, offering a balance between visual quality and smoothness at this high resolution.

Settings Recommendations

For the best experience, the data points to 1440p as the sweet spot for this combination. At 2560x1440, the High preset delivers an average of 101.9 FPS, which is comfortably above 60 FPS and provides a smooth, visually rich experience. The Medium preset at this resolution offers 114.1 FPS, which could be preferable for users with high refresh rate monitors. The Ultra preset at 1440p still achieves 79.9 FPS, which is playable, but the performance gain from the High preset is minimal compared to the frame rate cost.

At 4K, the situation is different. The High preset at 3840x2160 yields 53.7 FPS, which is playable but not ideal for fast-paced action. The Medium preset provides a more stable 63 FPS, making it the recommended choice for 4K gaming. The Ultra preset at 4K drops to 45 FPS, which is generally considered too low for a smooth experience in an action RPG. The Low preset at 4K, at 81.4 FPS, is an option for players prioritizing frame rate over visual fidelity, but it defeats the purpose of a high-resolution display.

At 1080p, every preset is playable. The Ultra preset at 116.5 FPS is the best choice for maximum visual quality, while the Low preset at 214 FPS is for users with very high refresh rate displays. The High preset at 155.1 FPS is a balanced choice. The recommendation is to prioritize 1440p High for the best balance of image quality and performance, or 4K Medium if the user insists on 4K resolution.

How This Combo Ranks

The AMD Ryzen 7 5700X3D and AMD Radeon RX 9070 XT combination is ranked 484 out of 1656 tested combinations in The Technomancer. This places it in the 71st percentile of all tested systems, indicating a strong overall performance. The high rank is consistent with the measured frame rates, which are above average for most resolution and settings combinations.

This ranking is a reflection of the balanced nature of the pairing. The RX 9070 XT provides ample graphics horsepower, while the Ryzen 7 5700X3D ensures the system is not held back by CPU limitations. The GPU's individual percentile is 82, and its average benchmark score is 39,647. The CPU also sits at the 82nd percentile, with an average score of 24,673. The combination of two high-performing components results in a system that is greater than the sum of its parts in this specific game.

The rank of 484 out of 1656 is a clear indicator that this system is capable of delivering a satisfying gaming experience. It is not at the absolute top of the rankings, but it is well within the top half and outperforms the majority of tested configurations. The data confirms that this is a well-matched set of hardware for The Technomancer.

Measured FPS Breakdown

The following is the complete measured FPS data for this combination in The Technomancer.

1920x1080 (1080p):

  • Low: 214.0 FPS
  • Medium: 181.1 FPS
  • High: 155.1 FPS
  • Ultra: 116.5 FPS

2560x1440 (1440p):

  • Low: 150.3 FPS
  • Medium: 114.1 FPS
  • High: 101.9 FPS
  • Ultra: 79.9 FPS

3840x2160 (4K):

  • Low: 81.4 FPS
  • Medium: 63.0 FPS
  • High: 53.7 FPS
  • Ultra: 45.0 FPS

The data shows a clear and consistent hierarchy. The Low preset always yields the highest frame rate, followed by Medium, then High, with Ultra being the most demanding. The frame rate drop from 1080p to 4K is significant, with the Ultra preset at 4K being the only configuration to fall below 50 FPS. The system's performance is strong across the board, with the 1440p High preset offering over 100 FPS, making it an excellent choice for this action RPG.

Hardware Specifications

AMD Ryzen 7 5700X3D

Cores / Threads 8 / 16
Base Clock 3000 MHz
Boost Clock 4100 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9070 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2970 MHz MHz
TDP 304 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700X3D + AMD Radeon RX 9070 XT in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 81.4
3840x2160 Medium 63.0
3840x2160 High 53.7
3840x2160 Ultra 45.0
2560x1440 Low 150.3
2560x1440 Medium 114.1
2560x1440 High 101.9
2560x1440 Ultra 79.9
1920x1080 Low 214.0
1920x1080 Medium 181.1
1920x1080 High 155.1
1920x1080 Ultra 116.5

The Technomancer with Ryzen 7 5700X3D + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with RX 9070 XT + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with Ryzen 7 5700X3D + RX 9070 XT

Explore FPS benchmarks for other games using this same hardware combination.