Doom

The AMD Ryzen 7 5700X3D paired with the AMD Radeon RX 9070 XT delivers a commanding performance in Doom, with measured frame rates that scale predictably across resolutions and settings. The data reveals a system that is overwhelmingly GPU-bound at lower resolutions, but begins to show a more balanced workload as pixel count rises. This combination ranks 937th out of 3712 tested combos for this title, placing it in the upper quartile of all configurations evaluated.

Resolution Scaling

The transition from 1080p to 4K produces a steep and consistent drop in average frame rates across all settings, signaling that the rendering load scales heavily with pixel count. At High settings, the average FPS falls from 231 at 1920x1080 to 149 at 2560x1440, a reduction of 82 FPS, and then further down to 81 at 3840x2160. This represents a 65% decrease from 1080p to 4K, indicating that the RX 9070 XT's raw throughput is the primary constraint once resolution increases.

The scaling pattern is even more pronounced at Low settings, where the average FPS drops from 311 at 1080p to 203 at 1440p and then to 110 at 4K. The gap between 1080p and 1440p at Low settings is 108 FPS, while the gap between 1440p and 4K is 93 FPS. This nearly linear decline suggests that the GPU's fillrate and memory bandwidth are being taxed proportionally to the number of pixels, with no sudden bottleneck emerging from the CPU at any point.

At Ultra settings, the same trend holds, with averages of 189 at 1080p, 122 at 1440p, and 66 at 4K. The 4K Ultra figure is notably low, representing just 35% of the 1080p Ultra performance. This steep drop-off implies that the most demanding preset combined with 4K resolution pushes the GPU to its limits, leaving little headroom for additional visual fidelity. The data does not show any anomaly that would suggest a CPU limitation, as the frame rate declines are smooth and proportional across all resolution steps.

GPU Role

The Radeon RX 9070 XT is built on the RDNA 4.0 architecture and features 16 GB of GDDR6 memory on a 256-bit bus, yielding a memory bandwidth of 644.6 GB/s. This substantial bandwidth is critical for Doom, which is a fast-paced FPS that relies on rapid texture streaming and high-resolution assets. The GPU's base clock is 1660 MHz, with a boost clock of 2970 MHz and a game clock of 2400 MHz, providing a wide operating range that allows the card to scale its performance dynamically.

The 4096 shading units and 128 ROPs contribute to the GPU's ability to maintain high fill rates, as evidenced by the measured pixel rate of 380.2 GPixel/s and texture rate of 760.3 GTexel/s. These specifications translate directly to the observed frame rates, particularly at 1080p where the GPU is not starved for bandwidth. The FP32 performance of 48.66 TFLOPS is more than sufficient for Doom's id Tech 6 engine, which is known for its efficient use of compute resources.

At 4K, the GPU's 16 GB VRAM capacity becomes relevant, as the game's Ultra preset likely uses more than 8 GB of memory for textures and geometry. The measured minimum FPS of 81 at 4K Medium confirms that the GPU is still capable of maintaining playable frame rates even under heavy memory pressure. The GPU's percentile ranking of 55 against all GPUs suggests it is a mid-to-high-range performer, but its nearest rivals in the benchmark database include older cards like the GeForce GTX 570 and Radeon HD 7770M, which have vastly different specifications. This indicates that the average benchmark score may not fully capture the 9070 XT's gaming prowess in titles like Doom.

Settings Recommendations

The data indicates that Medium settings offer the most balanced experience across all resolutions, with average frame rates that remain high while still providing a visual quality upgrade over Low. At 1440p, Medium delivers 177 FPS average, which is only 26 FPS lower than Low's 203 FPS but significantly higher than High's 149 FPS. This suggests that Medium is the sweet spot for players who want smooth gameplay without sacrificing too much visual detail.

At 4K, Medium produces an average of 96 FPS with a minimum of 81 FPS, which remains comfortably above the 60 FPS threshold for fluid gameplay. High settings at 4K drop to 81 FPS average, which is still playable but leaves less headroom for demanding scenes. Ultra settings at 4K yield only 66 FPS average, which may result in noticeable stuttering during intense combat sequences.

For 1080p, the choice is less critical, as even Ultra settings achieve 189 FPS average. However, the measured data shows that Low settings at 1080p reach 311 FPS, which is beneficial for competitive play on high-refresh-rate monitors. The recommendation based on the measured rows is to use Medium settings for a balanced experience, or High settings if visual fidelity is prioritized and the resolution is 1440p or lower. Ultra should be reserved for 1080p where the GPU has ample headroom.

Measured FPS Breakdown

At 1920x1080, the average frame rates range from 311 FPS on Low to 189 FPS on Ultra. The Medium preset achieves 273 FPS average, with a minimum of 232 FPS and a maximum of 314 FPS. High settings produce 231 FPS average. The spread between Low and Ultra is 122 FPS, indicating that the GPU is the limiting factor even at the lowest resolution, as the CPU does not appear to cap performance.

At 2560x1440, the averages are 203 FPS on Low, 177 FPS on Medium (minimum 150, maximum 203), 149 FPS on High, and 122 FPS on Ultra. The delta between Low and Ultra narrows to 81 FPS, suggesting that the GPU is scaling its workload more efficiently as resolution increases. The Medium preset's minimum of 150 FPS indicates consistent frame delivery without major dips.

At 3840x2160, the averages drop to 110 FPS on Low, 96 FPS on Medium (minimum 81, maximum 110), 81 FPS on High, and 66 FPS on Ultra. The minimum FPS at 4K Medium is 81, which matches the average FPS at 4K High, highlighting the significant performance cost of higher settings. The gap between Low and Ultra at 4K is 44 FPS, showing that the GPU is heavily constrained by pixel count and setting complexity.

How This Combo Ranks

The combination of the Ryzen 7 5700X3D and RX 9070 XT ranks 937th out of 3712 tested combos in Doom, placing it in the 75th percentile overall. This ranking indicates that the system outperforms the majority of configurations tested for this game, though it is not at the absolute top tier. The data suggests that the CPU's 3D V-Cache technology provides a meaningful boost in gaming workloads, as the 96 MB of shared L3 cache helps reduce memory latency in CPU-bound scenarios.

The CPU's benchmark scores further contextualize this ranking. The Ryzen 7 5700X3D achieves a 3DMark max threads score of 6755 and a Cinebench R23 multicore score of 22366, which are strong results for a desktop processor. Its nearest rivals, such as the AMD Ryzen 5 7600X3D and Intel Core i5-12450HX, have similar average scores, with delta percentages of -0.1% and 0.5% respectively. This indicates that the CPU is performing as expected for its class.

The GPU's average benchmark score of 13543 is lower than its gaming performance would suggest, as its nearest rivals include older cards like the GeForce GTX 570 with a delta of 0.2%. This discrepancy is likely due to the benchmark suite weighting compute workloads differently than gaming, but the measured FPS data in Doom clearly shows the RX 9070 XT's strength in real-world gameplay.

FAQ

Q: What is the highest average FPS achievable at 1080p with this combo?

A: The highest measured average FPS at 1920x1080 is 311 FPS, achieved with Low settings. The Ultra preset still delivers 189 FPS average.

Q: Does the RX 9070 XT maintain playable frame rates at 4K Ultra?

A: Yes, the measured average FPS at 3840x2160 Ultra is 66 FPS, which is above the 60 FPS threshold for playability, though it leaves little headroom for demanding scenes.

Q: How much performance is lost when moving from 1440p to 4K at High settings?

A: The average FPS drops from 149 at 2560x1440 to 81 at 3840x2160, representing a 68 FPS decrease, or approximately 46% lower performance.

Q: Is the Ryzen 7 5700X3D a bottleneck in this game?

A: The data does not indicate a CPU bottleneck, as frame rates scale smoothly with resolution changes. The CPU's 3DMark max threads score of 6755 and Cinebench R23 multicore score of 22366 show strong multi-threaded performance.

Q: What is the minimum FPS recorded for this combo?

A: The lowest minimum FPS recorded is 81 FPS, which occurs at 3840x2160 with Medium settings. All other settings and resolutions have minimums of 150 FPS or higher.

Q: How does this combo rank compared to all other tested configurations?

A: This combo ranks 937th out of 3712 tested combos for Doom, placing it in the upper 25% of all configurations tested.

CPU Role

The AMD Ryzen 7 5700X3D is an 8-core, 16-thread processor based on the Zen 3 architecture, codenamed Vermeer, and manufactured on a 7 nm process. Its base clock is 3.00 GHz with a boost clock of 4.10 GHz, and it features 96 MB of shared L3 cache, which is the defining characteristic of the X3D lineup. This large cache is designed to reduce memory latency in gaming workloads, and the benchmark results in Doom suggest it is effective, as frame rates remain high even at lower resolutions where CPU overhead is more likely to surface.

The CPU's single-thread performance, as measured by a 3DMark single thread score of 804 and a Cinebench R23 singlecore score of 3157, is adequate for modern game engines that rely on a few primary threads. However, Doom is known for its efficient multi-threading, and the CPU's 16 threads are well-utilized, as evidenced by the 3DMark 16 threads score of 6764. The Passmark multithread score of 26318 further confirms the CPU's capability to handle concurrent workloads.

The CPU's memory support is DDR4 with dual-channel configuration, providing 51.2 GB/s of bandwidth. While this is lower than newer DDR5 platforms, the large L3 cache compensates by reducing the frequency of memory accesses. The CPU's percentile ranking of 77 against all CPUs indicates it outperforms most processors on the market, and its nearest rival, the AMD Ryzen 5 7600X3D, has a nearly identical average score with a delta of -0.1%. This suggests that the 5700X3D is a mature and well-optimized part for gaming, and in Doom, it does not appear to constrain the RX 9070 XT at any resolution or settings level.