The Technomancer

The Technomancer, a 2016 Action RPG, presents an interesting stress test for the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 5080 combination. The benchmark data reveals a system that is overwhelmingly GPU-bound at higher resolutions, but which still delivers exceptionally high frame rates even at 4K, making it a potent pairing for this title.

Resolution Scaling

The performance scaling from 1080p to 4K clearly illustrates where the bottleneck lies within this combo. At 1080p with High settings, the system produces an average of 205.5 FPS. Moving to 1440p drops this to 135.1 FPS, a reduction of approximately 34%. The jump to 4K further reduces performance to 71.8 FPS, a 47% drop from the 1440p figure. This pattern of significant frame rate erosion with each resolution increase is the classic signature of a GPU-limited scenario. The RTX 5080 is being pushed progressively harder as pixel count rises, while the Ryzen 7 5700X has ample headroom to feed it frames.

This conclusion is reinforced by the scaling across quality presets. At 4K, the difference between Low and Ultra settings is dramatic, with average FPS ranging from 109.8 on Low down to 58.8 on Ultra. This 51 FPS spread is substantial and directly attributable to the GPU's workload. However, at 1080p, the same preset sweep from Low to Ultra only shifts performance from 245.8 FPS down to 160.4 FPS. While still a significant decrease, the absolute floor is much higher, and the system is likely encountering CPU or engine-level limits that prevent the GPU from being fully utilized at lower resolutions. The data suggests that at 1080p, the CPU's role becomes more prominent, capping the maximum achievable frame rate, whereas at 4K, the GPU's rendering capabilities are the definitive limiting factor.

How This Combo Ranks

Looking at the broader picture, this specific CPU-GPU pairing performs exceptionally well in The Technomancer. The data places this combo at rank 87 out of 1656 tested combinations, placing it in the top 5.3% of all systems. This high ranking confirms the balance between the two components for this particular game. While the RTX 5080 is a high-end card, its performance is not being wasted by the CPU; the Ryzen 7 5700X is capable enough to keep it operating near its potential, allowing the combo to achieve a position well above the median.

The GPU itself holds a strong overall standing, with a percentile rank of 89 against all GPUs. Its average benchmark score of 59188 is competitive, sitting close to rivals like the Intel Arc Pro A60, which is only 1.9% ahead, and the Intel Arc A570M, which trails by 1.6%. This indicates that the RTX 5080's raw graphics power is a major contributor to the combo's high in-game rank. The CPU, with a percentile rank of 83 against all CPUs, is also a solid performer, but its contribution is more about providing a stable foundation than being the primary driver of the frame rate in this GPU-intensive title.

CPU Role

The AMD Ryzen 7 5700X, built on the Zen 3 architecture, provides the computational backbone for this system. With 8 cores and 16 threads, it offers a substantial amount of parallel processing power. Its benchmark results, such as a Cinebench R23 multicore score of 22620 and a Geekbench multicore score of 9720, demonstrate its capability in multi-threaded workloads. However, for a game like The Technomancer, the single-thread performance is often more critical for game logic and physics. In this regard, the CPU's Cinebench R23 single-core score of 3193 and 3DMark single-thread score of 921 indicate a strong per-core capability.

These characteristics help explain the performance scaling observed in the game. At 1080p, where the GPU can render frames very quickly, the CPU is more likely to become a bottleneck. The fact that the average FPS at 1080p Low is 245.8, but only rises to 205.5 at High, suggests that the CPU is limiting the maximum frame rate. The GPU is capable of more, but the CPU is not able to issue draw calls and process game state fast enough to keep up. As resolution increases to 4K, the GPU's rendering time per frame grows, giving the CPU more time to prepare the next frame, thus shifting the bottleneck away from the processor. The CPU’s performance relative to its nearest rivals, such as being 0.1% behind the Intel Core i9-11900KF, shows it is a competitive part that is unlikely to be the primary source of frame pacing issues in most scenarios.

FAQ

Q: What is the maximum average frame rate this combo can achieve in The Technomancer?

A: The highest average FPS recorded is 245.8 at 1920x1080 with Low settings.

Q: How does the combo perform at 4K with the highest visual fidelity?

A: At 3840x2160 with Ultra settings, the system produces an average of 58.8 FPS.

Q: Is this system more limited by the CPU or GPU at 1080p?

A: The data suggests the CPU becomes a more significant limiting factor at 1080p. The frame rate difference between Low (245.8 FPS) and High (205.5 FPS) settings is relatively modest, indicating the CPU is constraining the maximum output.

Q: What is the performance difference between 1440p and 1080p at High settings?

A: At 2560x1440, the average FPS is 135.1, which is 70.4 FPS lower than the 205.5 FPS achieved at 1920x1080.

Q: How does the RTX 5080 compare to its closest rivals based on average benchmark scores?

A: The RTX 5080's average score of 59188 is 1.9% behind the Intel Arc Pro A60 and 1.6% ahead of the Intel Arc A570M.

Q: What is the overall ranking of this CPU and GPU combination in this game?

A: This combo is ranked 87th out of 1656 tested combinations, placing it in the top 5.3% of all systems tested.

GPU Role

The NVIDIA GeForce RTX 5080 is the undisputed performance driver in this pairing for The Technomancer. Its architecture, Blackwell 2.0, is built on a 5 nm process and houses 45,600 million transistors. The card's substantial resources include 10752 shading units, 336 texture mapping units, and 112 render output units. This hardware configuration allows for massive parallel throughput, reflected in its FP32 performance of 56.28 TFLOPS. The GPU's high pixel rate of 293.1 GPixel/s and texture rate of 879.3 GTexel/s are directly relevant to rendering the game's environments and characters.

The 16 GB of GDDR7 memory on a 256-bit bus provides a memory bandwidth of 960.0 GB/s. This is a crucial asset for modern gaming, as it allows the GPU to quickly access textures and geometry data without stalling. The benchmark results confirm the GPU's dominance. Its 3DMark Steel Nomad DX12 score of 8637 and Passmark G3D score of 36565 highlight its raw compute and rendering capabilities. The GPU's performance in this game is best illustrated by the 4K Ultra result of 58.8 FPS. This is a demanding scenario, and the card's ability to maintain a playable frame rate at this resolution and quality level demonstrates its high-end positioning. The performance difference between the Low and Ultra presets at 4K, a 51 FPS gap, is almost entirely a function of the GPU's workload, underscoring its central role in determining the final visual output.