The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding load for this pairing of AMD's Ryzen 7 5700G and Radeon RX 7600 XT. The benchmark data reveals a system that is decisively GPU-bound at higher resolutions, but the CPU's capabilities still set the ceiling for frame rates at lower settings. The measured FPS across resolutions and presets paints a clear picture of where this combo excels and where it falls short of smooth gameplay.

Resolution Scaling

The transition from 1080p to 4K produces a dramatic shift in performance, confirming that the RX 7600 XT is the primary limiting factor as pixel count rises. At 1080p with High settings, the combo delivers 99.8 FPS, which feels responsive. Moving to 1440p High, the average drops to 62.9 FPS, a 36.9% reduction, indicating the GPU is now working significantly harder. The jump to 4K High is more punishing, with the average falling to 35.6 FPS—a 64.3% drop from the 1080p figure. This steep decline is typical of a mid-range graphics card being pushed beyond its comfortable zone.

The scaling pattern becomes even more telling when examining the Low preset. At 1080p Low, the system achieves 145.4 FPS, suggesting the CPU is feeding the GPU well and the card is not fully saturated. However, at 4K Low, the average craters to 54 FPS. This is a 62.9% reduction from the 1080p Low score, which is nearly the same proportional drop as seen on High settings. This consistency indicates that even at the lowest graphical fidelity, the sheer number of pixels at 4K overwhelms the GPU's 2048 shading units and 128-bit memory bus, despite the 16 GB of GDDR6 memory. The data shows that the sweet spot for this combo is 1080p, where it can leverage the CPU's strong single-thread performance to hit high frame rates, while 1440p remains viable for High settings, and 4K should be reserved for less demanding titles or lower presets.

GPU Role

The Radeon RX 7600 XT's specifications directly explain its performance profile in The Technomancer. With a base clock of 1980 MHz and a boost clock of 2755 MHz, the card has ample headroom, but its 128-bit memory interface and 288.0 GB/s bandwidth become a bottleneck at higher resolutions. The 16 GB of VRAM is ample for this title, so capacity is not the issue; rather, it is the bandwidth that limits texture streaming and fill-rate-heavy scenes at 4K. The card's 64 ROPs and 352.6 GTexel/s texture rate are adequate for 1080p, as evidenced by the 145.4 FPS at Low, but they are insufficient to maintain high frame rates at 4K Ultra, where the average dips to 29.8 FPS.

The GPU's benchmark scores also contextualize its position. Its PassMark G3D score of 17132 places it in the 63rd percentile of all GPUs. Its nearest rival, the RX 7600, scores a delta of -0.6%, meaning the XT variant is only marginally faster in synthetic tests. This close margin is reflected in the game's measured results, where the card behaves like a solid 1080p performer that can handle 1440p with some adjustments. The RTX 2060 SUPER is 1.9% behind, while the RTX 3070 Mobile is 1.9% ahead, positioning this card firmly in the upper-mid-range tier. For The Technomancer, the data suggests the GPU's clock speed is less important than its memory bandwidth, as the FPS drops are more pronounced when resolution increases than when settings are raised from Medium to High at the same resolution.

FAQ

Q: Can this combo run The Technomancer at 4K smoothly?

A: No. The data shows the average FPS at 4K Ultra is 29.8, and at 4K High it is 35.6. Even at 4K Low, the average is only 54 FPS, which is below the 60 FPS target for smooth gameplay. The GPU is the limiting factor at this resolution.

Q: What is the best resolution for this pairing?

A: 1080p is clearly the strongest resolution. At High settings, the combo achieves 99.8 FPS, and at Low it reaches 145.4 FPS. 1440p is also playable, with a 62.9 FPS average on High, but it requires dropping to Low to exceed 90 FPS (98.2 FPS).

Q: How does the RX 7600 XT compare to its closest rival, the RX 7600?

A: The synthetic benchmark data shows a deltaPct of -0.6% for the RX 7600, meaning the XT variant is slightly faster. In practical terms for The Technomancer, this difference is negligible, so users should expect nearly identical in-game performance.

Q: Is the Ryzen 7 5700G holding the system back?

A: No. The CPU's 3DMark single-thread score is 899, and its PassMark single-thread score is 3283, which are strong. The FPS drop from 1080p Low (145.4) to 4K Low (54) is a 62.9% reduction, which is a GPU bottleneck, not a CPU one. The CPU is capable of pushing well over 100 FPS in this game.

Q: What preset should I use for a 60 FPS target at 1440p?

A: The High preset delivers an average of 62.9 FPS, which is just above the target. However, for more consistent performance and to avoid dips, the Medium preset at 74 FPS provides a safer margin. Ultra is not recommended, as it drops the average to 49.2 FPS.

Q: Does the 16 GB of VRAM make a difference in this game?

A: The data indicates that VRAM capacity is not a performance limiter for this title. The FPS drops are more correlated with resolution increases, suggesting the 128-bit memory bus and overall bandwidth are the constraints, not the 16 GB capacity.

Settings Recommendations

For the best balance of visual quality and frame rate, the Medium preset is the most versatile choice across all tested resolutions. At 1080p Medium, the combo produces 112.9 FPS, which is excellent for fast-paced action, and it offers a significant visual upgrade over Low. At 1440p Medium, the 74 FPS average is ideal for a smooth experience on higher refresh rate monitors. Even at 4K, Medium yields 39.5 FPS, which is more playable than High (35.6) or Ultra (29.8), though still not ideal.

If a user prioritizes maximum frame rates, the Low preset should be used. At 1080p, it unlocks 145.4 FPS, and at 1440p it maintains a very high 98.2 FPS. However, the visual compromise is noticeable. For those with 4K displays, the Low preset is the only viable option, providing 54 FPS. The High preset is best reserved for 1080p (99.8 FPS) or 1440p (62.9 FPS) where it provides a strong visual experience without sacrificing playability. The Ultra preset is only recommended for 1080p, where the 75.3 FPS average is still smooth, but the performance cost at higher resolutions is too steep.

How This Combo Ranks

In the database of tested combinations for The Technomancer, this pairing of the Ryzen 7 5700G and RX 7600 XT ranks 1073 out of 1656 total combos. This places it in the 35th percentile from the top, indicating that it is a below-average performer for this specific game when compared to all other tested hardware configurations. This ranking is somewhat surprising given the individual component scores, but it reflects the game's heavy reliance on GPU memory bandwidth, which is a known weakness of the 128-bit bus on the RX 7600 XT.

The combo's position is likely dragged down by the GPU's performance at 4K, where it struggles to maintain playable frame rates. The CPU's performance is solid, with an average benchmark score of 25626 placing it in the 83rd percentile of all CPUs, but this does not translate into a high in-game rank because the GPU becomes the bottleneck at higher resolutions. In contrast, combos with GPUs that have wider memory interfaces or higher bandwidth would likely rank higher, even if their raw compute scores were similar. This data shows that for The Technomancer, the GPU's memory subsystem is more critical than its core clock speed or shading unit count.

Measured FPS Breakdown

The following data represents the exact measured average FPS for each resolution and settings preset combination.

1080p (1920x1080):

• Low: 145.4 FPS
• Medium: 112.9 FPS
• High: 99.8 FPS
• Ultra: 75.3 FPS

1440p (2560x1440):

• Low: 98.2 FPS
• Medium: 74.0 FPS
• High: 62.9 FPS
• Ultra: 49.2 FPS

4K (3840x2160):

• Low: 54.0 FPS
• Medium: 39.5 FPS
• High: 35.6 FPS
• Ultra: 29.8 FPS

The data shows a clear pattern: the delta between Low and Medium is consistently smaller than the delta between Medium and High, suggesting diminishing returns for each step up in quality. The largest performance gap is always between 1440p and 4K, regardless of settings, which reinforces the conclusion that the GPU's memory bandwidth is the primary constraint. For a practical user, this system is best suited for 1080p gaming with Ultra settings or 1440p with High settings, where it delivers a smooth and visually pleasing experience.