The Technomancer

The AMD Ryzen 7 3700X paired with the AMD Radeon RX 6600 XT delivers a playable but demanding experience in The Technomancer, with frame rates that scale predictably across resolutions. The data shows a combo that is clearly GPU-bound at higher settings, yet capable of smooth performance when settings are tuned appropriately.

Resolution Scaling

The measured FPS data reveals a steep performance drop as resolution increases, which is the classic signature of a GPU-limited scenario. At 1080p with High settings, the combo produces 91.8 FPS. Moving to 1440p High drops that to 59.4 FPS, a reduction of roughly 35%. The jump to 4K High is brutal: 30.5 FPS, which is about 67% lower than the 1080p result. This scaling pattern indicates that the Radeon RX 6600 XT is the primary bottleneck as pixel count rises.

The trend holds across all settings. At Low settings, the combo achieves 139.9 FPS at 1080p, 92.8 FPS at 1440p, and 49.9 FPS at 4K. The 1440p Low result is still above the 60 FPS threshold, but 4K Low barely holds at 49.9 FPS. This is not a configuration for 4K gaming unless you accept frame rates in the 30-50 FPS range. The gap between 1080p and 1440p is consistently around 30-35%, while the gap between 1440p and 4K is even larger, often exceeding 45%. This accelerating drop at 4K confirms that the GPU’s 8 GB memory and 256.0 GB/s bandwidth are insufficient to feed the higher pixel count without significant frame rate penalties.

How This Combo Ranks

In The Technomancer, this specific CPU-GPU combination ranks 1276 out of 1656 tested combos. That places it in the lower-middle tier of all configurations benchmarked for this game. The percentile ranking for the CPU alone is 85th among all processors, and the GPU sits at the 71st percentile among all graphics cards. However, when combined, the pair does not punch above its weight in this title, suggesting that the game’s engine is not fully utilizing the strengths of either component.

The GPU’s nearest rivals by average benchmark score include the NVIDIA GeForce GTX 980 Ti (0.1% higher score) and the AMD Radeon R9 M395X (0.4% higher). The CPU’s nearest rivals include the Intel Core i5-12600 (-0.1% delta) and the AMD Ryzen 5 5600XT (0.1% delta). These close margins in synthetic benchmarks do not translate into a high in-game rank, which points to The Technomancer being a title that rewards raw GPU throughput over balanced system performance. The combo’s rank of 1276 out of 1656 means that roughly 77% of tested combinations deliver better frame rates in this specific game, despite the components being individually competitive in their respective markets.

CPU Role

The AMD Ryzen 7 3700X brings 8 cores and 16 threads, with a base clock of 3.60 GHz and a boost clock of 4.40 GHz. This is a Zen 2 architecture processor on a 7 nm process, with 32 MB of L3 cache. In synthetic benchmarks, it scores 19087 in Cinebench R23 multi-core and 2694 in single-core. These are strong numbers that place it in the 85th percentile of all CPUs.

However, in The Technomancer, the CPU’s role appears secondary. The measured FPS drops from 1080p to 4K are far more dramatic than what a CPU bottleneck would produce. At 1080p Low, the combo hits 139.9 FPS, which is high enough that the CPU could be a limiting factor, but the 8-core, 16-thread configuration is more than adequate for a 2016 Action RPG. The game likely does not scale well beyond a handful of threads, so the Ryzen 7 3700X’s multi-core advantage is underutilized. The single-core performance, while respectable, does not push the frame rates as high as newer architectures might. The 65 W TDP and 51.2 GB/s memory bandwidth are sufficient for this workload, but they do not boost the combo’s ranking above the 1276th position.

Measured FPS Breakdown

At 1080p, the combo delivers strong results across the board. Low settings produce 139.9 FPS, Medium drops to 108.2 FPS, High hits 91.8 FPS, and Ultra manages 72 FPS. This is a very playable range for a fast-paced Action RPG, with even Ultra remaining comfortably above the 60 FPS target. The scaling from Low to Ultra is about 49%, which is reasonable and shows that the GPU has headroom at this resolution.

Moving to 1440p, the frame rates become more moderate. Low settings yield 92.8 FPS, Medium produces 70.3 FPS, High drops to 59.4 FPS, and Ultra falls to 46 FPS. The drop from Low to Ultra is roughly 50%, but the absolute numbers are lower. High settings at 1440p are borderline for 60 Hz displays, while Ultra will require a variable refresh rate monitor to avoid stutter. This is the resolution where the GPU’s 8 GB VRAM and 128-bit memory bus start to show limitations.

At 4K, the results are marginal. Low settings give 49.9 FPS, Medium drops to 37.3 FPS, High falls to 30.5 FPS, and Ultra bottoms out at 28.5 FPS. None of these are ideal for a responsive gaming experience. The jump from 1440p Ultra (46 FPS) to 4K Ultra (28.5 FPS) is a 38% reduction, confirming that the RX 6600 XT is not designed for 4K gaming. Even Low settings at 4K barely reach 50 FPS, which is below the 60 FPS target most players prefer.

GPU Role

The AMD Radeon RX 6600 XT is the clear driver of performance in this combo. It features 2048 shading units, 128 TMUs, and 64 ROPs, with a boost clock of 2589 MHz and a game clock of 2359 MHz. The 8 GB of GDDR6 memory on a 128-bit bus provides 256.0 GB/s of bandwidth. These specifications place it in the 71st percentile of all GPUs, with an average benchmark score of 27985.

In The Technomancer, the GPU’s role is decisive. The FPS scaling from 1080p to 4K follows the GPU’s raw compute capabilities closely. At 1080p High, the combo produces 91.8 FPS, which is a solid result for a mid-range card. However, the 4K High result of 30.5 FPS is a stark reminder that this GPU is not a 4K solution. The nearest rivals in synthetic benchmarks, such as the NVIDIA GeForce GTX 980 Ti (0.1% higher score) and the AMD Radeon R9 M395X (0.4% higher), would likely exhibit similar in-game scaling patterns. The 160 W TDP and PCIe 4.0 x8 interface are adequate, but the 8 GB VRAM may cause texture thrashing at 4K Ultra, which could explain the steep drop to 28.5 FPS. The data suggests that this GPU is best paired with 1080p or 1440p displays, where it can deliver frame rates in the playable range.

FAQ

*Q: What is the highest average FPS this combo can achieve in The Technomancer?*

A: The highest measured average FPS is 139.9, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo perform at 4K Ultra settings?

A: At 3840x2160 with Ultra settings, the combo produces an average of 28.5 FPS, which is below the threshold for smooth gameplay.

Q: Is the CPU or GPU the limiting factor in this game?

A: The data indicates the GPU is the primary bottleneck, as FPS drops significantly with each resolution increase. At 1080p Low, the CPU could be a factor, but the overall scaling pattern points to the Radeon RX 6600 XT as the limiting component.

Q: What is the combo’s rank among all tested configurations?

A: The combo ranks 1276 out of 1656 tested combinations for The Technomancer, placing it in the lower-middle tier.

Q: Can this combo maintain 60 FPS at 1440p?

A: At 1440p Medium, it achieves 70.3 FPS, and at High it drops to 59.4 FPS. So, 60 FPS is achievable with Medium settings, but High settings just miss the mark.

Q: How does the RX 6600 XT compare to its nearest rival in synthetic benchmarks?

A: The Radeon RX 6600 XT has an average benchmark score of 27985, which is 0.1% lower than the NVIDIA GeForce GTX 980 Ti and 0.4% higher than the AMD Radeon R9 M395X.