The Technomancer

The Technomancer, a 2016 Action RPG, presents a demanding workload even for modern hardware, and the combination of the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 3080 delivers a performance profile that is heavily dictated by resolution and settings. The data shows a system that can comfortably handle high refresh rates at 1080p but begins to buckle under the weight of 4K Ultra, revealing a clear GPU bottleneck at higher resolutions. This pairing ranks in the 68th percentile of all tested combos for this specific title, indicating solid but not top-tier performance relative to the broader benchmark database.

Resolution Scaling

The measured FPS data reveals a steep performance drop as resolution increases, a classic indicator of a GPU-limited scenario at higher pixel counts. At 1080p High, the system produces an average of 144.7 FPS, but this falls to 92.3 FPS at 1440p and further to 51.9 FPS at 4K. This represents a 36% decrease from 1080p to 1440p, and a 64% decrease from 1080p to 4K, showcasing the exponential cost of rendering more pixels.

This scaling pattern strongly suggests that the RTX 3080 is the primary limiting component at 1440p and 4K. The CPU, with its high single-thread performance, has ample headroom to feed the GPU at lower resolutions, but as the pixel count climbs, the GPU's rendering throughput becomes the bottleneck. The gap between 1440p and 4K is notably larger than the gap between 1080p and 1440p, further confirming that the GPU is being saturated at the highest resolution, while at 1080p, the system is likely approaching a balance where both components are working near their limits.

How This Combo Ranks

In the grand scheme of tested hardware configurations for The Technomancer, this combo sits at rank 527 out of 1656 combinations. This places it in the upper-middle tier of performance, demonstrating that while it is not among the absolute fastest systems tested, it significantly outperforms the majority of setups. The rank reflects a balanced pairing where neither component is severely underpowered, but also where the GPU is not top-of-the-line by current standards.

The ranking implies that this system will provide a very playable experience for most users, especially those targeting 1080p or 1440p gaming. However, for enthusiasts seeking maximum frame rates at 4K with all settings maxed out, the 527th position suggests that there are many other combinations in the database that would offer superior performance. This is a strong, dependable setup, but not a record-breaking one.

GPU Role

The NVIDIA GeForce RTX 3080 is the workhorse of this pairing, and its specifications directly correlate with the measured frame rates. With 10 GB of GDDR6X memory on a 320-bit bus providing 760.3 GB/s of bandwidth, the card has substantial resources for handling high-resolution textures. The GPU's boost clock of 1710 MHz and its 8704 shading units are the primary drivers of its raw compute power, which is reflected in its strong performance at 1080p and 1440p.

The data shows that the GPU's performance is the deciding factor at higher resolutions. At 4K Ultra, the frame rate drops to 41.3 FPS, indicating that the card's compute and memory bandwidth are being fully taxed. The 10 GB VRAM, while adequate for many titles, may also be a limiting factor in The Technomancer at 4K with Ultra textures, potentially causing the card to work harder to manage memory allocation. The GPU's 80th percentile ranking among all GPUs confirms that it is a capable performer, but in this specific game, the combination's overall rank is dragged down by the CPU's relative performance.

Measured FPS Breakdown

The complete set of measured average FPS values provides a clear picture of the system's capabilities across different settings and resolutions.

At 1920x1080, the system is exceptionally fast. Low settings produce an average of 222.6 FPS, Medium yields 172.3 FPS, High reaches 144.7 FPS, and Ultra still maintains a smooth 114.6 FPS. This resolution is clearly where the combo shines, with all presets providing a highly playable experience on high-refresh-rate monitors.

Moving to 2560x1440, performance remains strong but shows the expected decline. Low settings average 143.4 FPS, Medium drops to 113.7 FPS, and High is at 92.3 FPS. Ultra settings fall to 74.5 FPS, which is still playable but begins to show the GPU's strain.

At 3840x2160, the GPU becomes the clear bottleneck. Low settings average 82.1 FPS, Medium drops to 58.3 FPS, and High is at 51.9 FPS. Ultra settings are the most demanding, producing an average of just 41.3 FPS, which is below the 60 FPS target most gamers prefer for smooth gameplay.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: According to the data, 1920x1080 is the optimal resolution, as it is the only one where all settings presets, including Ultra, deliver an average FPS above 100. This provides the smoothest experience with the highest visual fidelity.

Q: Can this system handle 4K gaming in The Technomancer?

A: Yes, but with compromises. The data shows that 4K is playable on Low settings with an average of 82.1 FPS, but performance drops to 41.3 FPS on Ultra. For a consistent 60 FPS experience at 4K, users would need to use Medium settings, which average 58.3 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 5 9600X has an average benchmark score of 28246. This is 0.3% higher than the Intel Core i5-13490F and AMD Ryzen 5 230, and 0.4% lower than the AMD Ryzen 7 8845HS. It is effectively tied with these processors in synthetic benchmarks.

Q: How does the GPU compare to its nearest rivals in terms of average score?

A: The NVIDIA GeForce RTX 3080 has an average benchmark score of 35787. This is 0.2% lower than the AMD Radeon Pro Duo and 0.9% lower than the AMD Radeon RX 7900 GRE, but 0.4% higher than the AMD Radeon 880M and 1% higher than the NVIDIA GeForce RTX 5070 Ti Mobile.

Q: Is the 10 GB of VRAM on the RTX 3080 a concern?

A: The data does not directly measure VRAM usage, but the significant performance drop at 4K Ultra (41.3 FPS) compared to 4K Low (82.1 FPS) suggests that the combination of high resolution and high settings, which typically require more memory, is heavily taxing the GPU's resources.

Q: What is the overall performance ranking of this specific combo?

A: This combination of CPU and GPU ranks 527th out of 1656 tested combos for The Technomancer. This places it in the upper-middle tier of performance, indicating a capable but not top-tier system for this game.

CPU Role

The AMD Ryzen 5 9600X, based on the Zen 5 architecture, provides a strong foundation for this gaming system. With 6 cores and 12 threads, it offers sufficient multi-threading for modern games, but its real strength lies in its single-thread performance. The CPU's boost clock of 5.40 GHz, combined with its high Cinebench R23 single-core score of 3603, ensures that game logic and physics calculations are handled efficiently.

In The Technomancer, the CPU's role is less critical than the GPU's at higher resolutions. The frame rate scaling from 1080p to 4K shows that the GPU is the limiting factor. However, at 1080p with Low settings, the CPU's strong single-thread performance allows the system to reach an average of 222.6 FPS, proving it is not a bottleneck in this scenario. The CPU's 85th percentile ranking among all CPUs indicates it is a high-performing processor, and its 65W TDP suggests it runs efficiently. Its performance is nearly identical to rivals like the Intel Core i5-13490F, with a deltaPct of just 0.3%.

Settings Recommendations

Based on the measured data, the optimal settings depend heavily on the user's target resolution and refresh rate. For a 1080p high-refresh-rate display, the Ultra preset is highly recommended, as it delivers an average of 114.6 FPS, providing a perfect balance of visual quality and performance. If a user has a 240Hz monitor, the High preset at 144.7 FPS or Medium at 172.3 FPS would be better suited to maximize the display's capabilities.

At 1440p, the High preset is the sweet spot, delivering 92.3 FPS. This provides a significant visual upgrade over Medium (113.7 FPS) while still maintaining a frame rate above 90 FPS, which is smooth for most gamers. The Ultra preset at 74.5 FPS is also viable for those who prioritize visual fidelity over maximum smoothness.

For 4K gaming, the data suggests that the Medium preset is the most balanced choice, yielding an average of 58.3 FPS. The Low preset offers a higher 82.1 FPS, but with a significant reduction in visual quality. The High and Ultra presets at 51.9 FPS and 41.3 FPS, respectively, are best avoided for a consistently smooth experience, as they fall below the 60 FPS threshold.