The Technomancer

Settings Recommendations

The measured FPS data for The Technomancer with the AMD Ryzen 5 9600X and AMD Radeon RX 7900 XTX reveals a clear pattern: the High preset offers the optimal balance between visual fidelity and frame rate across all tested resolutions. At 1920x1080, High delivers 174.8 FPS average, which is more than sufficient for smooth gameplay, while Ultra drops to 137.8 FPS — a substantial 37 FPS penalty for what is likely marginal visual improvement in a 2016 title. The gap between Medium and High at 1080p is similarly telling: 205.3 FPS at Medium versus 174.8 FPS at High, representing a 30.5 FPS cost for the upgrade.

At 2560x1440, the High preset again emerges as the recommended choice. The average of 117.7 FPS comfortably exceeds the 60 FPS threshold for high-refresh monitors, while Ultra drops to 87.6 FPS — still playable, but the 30.1 FPS difference between High and Ultra suggests diminishing returns. For users with 144Hz displays, Medium at 135.6 FPS may be preferable, but High remains the best experience-per-frame option.

The 3840x2160 results tell a different story. Here, High produces 65.8 FPS average, which is playable but not ideal for fast-paced action. Medium at 75.2 FPS offers a better experience at 4K, while Ultra falls to 51.6 FPS — below the 60 FPS target. Low at 98.3 FPS is the only preset that provides significant headroom at this resolution. For 4K users, the data suggests Medium as the sweet spot, as it maintains a respectable 75.2 FPS without the visual degradation of Low. The measured rows show no minimum or maximum FPS values, so these averages represent the complete picture available.

GPU Role

The AMD Radeon RX 7900 XTX serves as the dominant performance driver in this configuration. Its 24 GB of GDDR6 memory on a 384-bit bus provides 960.0 GB/s of bandwidth, which is more than adequate for The Technomancer's 2016-era asset streaming demands. The GPU's base clock of 1929 MHz and boost clock of 2498 MHz, with a game clock of 2365 MHz, demonstrate the RDNA 3.0 architecture's ability to sustain high frequencies under load. The memory operates at 2500 MHz with 20 Gbps effective speed, ensuring texture bandwidth is never a bottleneck.

The GPU's 6144 shading units, 384 texture mapping units, and 192 render output units provide substantial raw compute for this title. The FP32 throughput of 61.39 TFLOPS, combined with a pixel rate of 479.6 GPixel/s and texture rate of 959.2 GTexel/s, explains the strong scaling observed from Low to Ultra settings. The 96 ray tracing cores are present but largely irrelevant for this game, which predates widespread RT adoption.

The VRAM capacity is particularly relevant at 4K resolution. The measured data shows a 32.5 FPS drop from Low to Ultra at 3840x2160 (98.3 to 51.6 FPS), which suggests the GPU is compute-limited rather than memory-limited, as 24 GB is far beyond what this game requires. The 355 W TDP and dual-slot design with 2x 8-pin power connectors indicate the card is operating within its designed power envelope, with a suggested 750 W PSU providing adequate headroom. The PCIe 4.0 x16 interface ensures no bandwidth limitations, and the DirectX 12 Ultimate support with feature level 12_2 is more than sufficient for a game that shipped years before this GPU's release.

FAQ

Q: What is the best resolution for this combo in The Technomancer?

A: The data shows 1920x1080 provides the highest frame rates, with the Low preset reaching 272.4 FPS and High at 174.8 FPS. At 2560x1440, High still delivers 117.7 FPS, making it viable for high-refresh displays. The 3840x2160 resolution is playable but only Medium and Low presets exceed 60 FPS.

Q: How much performance is lost when going from Low to Ultra at 1080p?

A: The measured data shows a drop from 272.4 FPS at Low to 137.8 FPS at Ultra at 1920x1080 — a 134.6 FPS reduction. This represents a 49.4% decrease in average frame rate, indicating that Ultra settings impose a significant GPU load in this title.

Q: Is the RX 7900 XTX's 24 GB VRAM beneficial for this game?

A: The Technomancer is a 2016 title that does not require large VRAM allocations. The measured performance scaling from Low to Ultra at all resolutions indicates the GPU is compute-limited rather than VRAM-limited. The 24 GB capacity provides no practical benefit for this specific game.

Q: Does the CPU bottleneck the GPU in this configuration?

A: The Ryzen 5 9600X's benchmark results — including a Cinebench R23 multi-core score of 25525 and single-core score of 3603 — suggest ample headroom. The 6-core, 12-thread processor with 32 MB L3 cache is likely not the limiting factor, as the GPU's performance scales consistently across settings.

Q: What frame rate can I expect at 1440p with High settings?

A: The measured average FPS at 2560x1440 with High settings is 117.7 FPS. This is 30.1 FPS higher than Ultra (87.6 FPS) and 17.9 FPS lower than Medium (135.6 FPS), positioning High as the recommended preset for this resolution.

Q: Is the RX 7900 XTX's end-of-life status a concern for this game?

A: The production status is listed as end-of-life, but the measured data shows strong performance across all tested settings. The GPU's DirectX 12 Ultimate support and Vulkan 1.4 compatibility ensure it fully supports The Technomancer's rendering requirements. No performance degradation is indicated in the results.

Measured FPS Breakdown

At 1920x1080, the performance envelope is broad and consistent. The Low preset achieves 272.4 FPS average, establishing the ceiling for this configuration. Medium follows at 205.3 FPS, High at 174.8 FPS, and Ultra at 137.8 FPS. The progression from Low to Ultra shows a 134.6 FPS spread, with each settings tier costing roughly 30-40 FPS. This scaling suggests the GPU has substantial headroom at 1080p, making even the most demanding preset highly playable.

At 2560x1440, the pattern shifts slightly. Low produces 176.8 FPS, Medium 135.6 FPS, High 117.7 FPS, and Ultra 87.6 FPS. The difference between Medium and High narrows to 17.9 FPS, while the gap between High and Ultra widens to 30.1 FPS. This indicates that Ultra settings introduce a disproportionately heavy load at 1440p, making High the more efficient choice. The 89.2 FPS spread from Low to Ultra remains substantial, confirming the GPU's capability at this resolution.

At 3840x2160, performance becomes more constrained. Low averages 98.3 FPS, Medium 75.2 FPS, High 65.8 FPS, and Ultra 51.6 FPS. The spread narrows to 46.7 FPS, and only Low and Medium consistently exceed 60 FPS. Ultra falls below the 60 FPS threshold, suggesting that 4K gaming with this title requires either reduced settings or acceptance of sub-60 FPS performance. The 13.4 FPS difference between High and Ultra at 4K is the smallest across all resolutions, indicating diminishing returns at this pixel count.

The resolution scaling across settings is also noteworthy. At Low, moving from 1080p to 1440p costs 95.6 FPS, and from 1440p to 4K costs 78.5 FPS. At Ultra, the corresponding drops are 50.2 FPS and 36.0 FPS. This pattern shows the GPU maintains a more consistent performance delta at higher settings, as the workload becomes more evenly distributed across the GPU's compute units.

How This Combo Ranks

The combination of the AMD Ryzen 5 9600X and AMD Radeon RX 7900 XTX holds the 207th position out of 1656 tested combinations in The Technomancer, placing it in the top 12.5% of all configurations. This ranking reflects the strong synergy between the CPU's single-thread performance and the GPU's raw rasterization power. The CPU's Geekbench single-core score of 3363 and the GPU's PassMark G3D score of 31238 both contribute to this competitive position.

The CPU's nearest rivals provide context for its contribution. The Intel Core i5-13490F sits 0.3% higher in average score, while the AMD Ryzen 5 230 matches at 0.3% above. The AMD Ryzen 7 8845HS trails by 0.4%, and the Intel Core i5-14500T is 0.5% behind. These margins are negligible, indicating the Ryzen 5 9600X is performing at the expected level for its class. The CPU's 85th percentile ranking among all processors further confirms its strong showing.

The GPU's rivalry data is similarly informative. The AMD Radeon Pro 580 is 0.4% ahead, while the NVIDIA GeForce RTX 4090 Mobile is 0.8% behind. The NVIDIA Quadro M6000 trails by 1.6%, and the NVIDIA GeForce RTX 4070 Ti is 2% ahead. The RX 7900 XTX's 85th percentile ranking among all GPUs places it comfortably in the upper tier, though the proximity of these rivals suggests the field is tightly packed at this performance level.

In the context of The Technomancer specifically, the combo's 207th rank out of 1656 indicates that while this configuration is strong, there are 206 combinations with superior measured performance. The game's age and relatively modest requirements mean that many high-end GPUs from recent generations can achieve high frame rates, making the competitive field crowded. The measured FPS data — particularly the 272.4 FPS at 1080p Low — suggests this combo is well-suited for high-refresh-rate gaming, even if it does not claim the top spot in the overall ranking.