The Technomancer

The Technomancer, a 2016 Action RPG, presents an interesting stress profile for the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 combination. The measured data shows a system that transitions from a CPU-limited state at lower resolutions to a GPU-bound scenario at 4K, with the settings menu acting as the primary lever for performance. The benchmark results indicate that this pairing is capable of delivering high refresh-rate gameplay at 1080p and smooth 60+ FPS experiences at 1440p, while 4K demands more careful tuning.

Resolution Scaling

The frame rate scaling from 1920x1080 to 3840x2160 reveals a classic bottleneck shift. At 1080p with Low settings, the combo produces an average of 230.3 FPS. This high frame rate suggests the CPU is working near its limit, as the GPU is not being taxed heavily at this resolution and preset. The delta between 1080p and 1440p at Low settings is a drop to 148.6 FPS, a significant 35% reduction, indicating that the GPU is starting to take on more of the workload. Moving from 1440p to 4K at Low settings yields 81.9 FPS, another substantial decrease, confirming that at 4K, the RTX 4070 is the primary limiting component.

The scaling pattern is consistent across all settings. For High, the average FPS goes from 150.4 at 1080p to 100.6 at 1440p, and finally to 54.7 at 4K. The drop from 1440p to 4K is roughly 45%, which is a typical magnitude for a GPU-bound scenario where the pixel count increases by 2.25 times. This data strongly suggests that the Ryzen 5 7600 has ample headroom at 4K, as the GPU is clearly the bottleneck. Conversely, the relatively small frame rate differences between 1080p and 1440p at Low settings indicate that the CPU is doing most of the heavy lifting at those lower resolutions, keeping the GPU from being the limiting factor. The 1080p Low result of 230.3 FPS is a strong indicator of the CPU's capability to feed the GPU in less demanding scenes.

How This Combo Ranks

In the grand scheme of tested hardware combinations for The Technomancer, this pairing of the AMD Ryzen 5 7600 and NVIDIA GeForce RTX 4070 secures the 454th position out of 1656 combos. This places it comfortably in the top 27% of all tested systems, a solid ranking that reflects a balanced, high-performance setup. While it is not at the absolute top, this rank indicates that the system will provide a smooth experience in the vast majority of scenarios.

The individual components have their own standings. The Ryzen 5 7600 CPU holds an 83rd percentile ranking against all CPUs in the database. Its average benchmark score of 26617 is nearly identical to its nearest rival, the AMD Ryzen 7 5800X3D, which scores 26574, a negligible delta of 0.2%. It also trades blows with the Intel Core i9-12900HK, which scores 26672, a -0.2% delta. This shows that the 7600's processor performance is squarely in the high-end tier for gaming. The RTX 4070 GPU, with an 81st percentile ranking against all GPUs, has an average benchmark score of 37283. Its closest rival, the AMD Radeon RX Vega 56, scores 37507, a -0.6% delta, meaning the RTX 4070 is statistically on par with it in general compute benchmarks, despite being a much newer architecture. The combo's 454th rank is a direct consequence of these two strong performers working in tandem, though the game's specific engine quirks can push the final result up or down slightly.

GPU Role

The NVIDIA GeForce RTX 4070 is the clear performance driver in this pairing, especially as resolution increases. Built on the Ada Lovelace architecture with 12 GB of GDDR6X memory on a 192-bit bus, it offers a memory bandwidth of 504.2 GB/s. This memory configuration is sufficient for The Technomancer at all tested settings, providing the necessary data throughput for high-resolution textures. The GPU's boost clock of 2475 MHz, up from a base of 1920 MHz, allows it to scale its performance dynamically under load.

The benchmark data shows that the GPU's role becomes more pronounced at higher resolutions. At 4K Ultra, the system drops to 43.8 FPS, a clear indication that the RTX 4070's raw rasterization power is being fully taxed. The difference between 4K Low (81.9 FPS) and 4K Ultra (43.8 FPS) is a 46% performance swing, which is almost entirely attributable to the GPU's workload. The GPU's 81st percentile ranking against all GPUs, with an average benchmark score of 37283, confirms its position as a high-end part. While its nearest rival in synthetic benchmarks is the Radeon RX Vega 56 (37507, -0.6% delta), the RTX 4070's modern feature set and efficiency are not captured in that single score. The data shows that in this specific game, the GPU is the component that dictates the maximum achievable quality and resolution.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend entirely on the target resolution and refresh rate. For 1920x1080, the Ultra preset is entirely viable, delivering an average of 118.8 FPS. This is well above the 60 FPS threshold and even supports high refresh rate monitors. For users with 144Hz or higher displays, the High preset at 150.4 FPS is a better choice to maximize smoothness, while still maintaining excellent visual quality.

At 2560x1440, the High preset is the sweet spot, offering an average of 100.6 FPS. This provides a great balance between visual fidelity and performance, easily clearing the 60 FPS bar for a smooth experience. The Ultra preset at 78.4 FPS is also playable and is a good choice for users who prioritize image quality over raw frame rate. For 4K (3840x2160), the Medium preset is the recommended starting point, providing an average of 67.1 FPS. This is the highest preset that consistently stays above the 60 FPS target. The High preset at 54.7 FPS is a solid alternative for gamers who prefer higher fidelity and can tolerate slightly lower frame rates, while the Low preset at 81.9 FPS is for those who demand the highest possible smoothness at this resolution.

Measured FPS Breakdown

The full dataset for this combo is as follows. At 1920x1080, the average frame rates are 230.3 FPS for Low, 176.5 FPS for Medium, 150.4 FPS for High, and 118.8 FPS for Ultra. These numbers show a clear and consistent scaling, with a total performance difference of 111.5 FPS between the lowest and highest presets.

Moving to 2560x1440, the results are 148.6 FPS for Low, 118.9 FPS for Medium, 100.6 FPS for High, and 78.4 FPS for Ultra. The step from Low to Ultra here is a 70.2 FPS drop, highlighting the increased pixel load. Finally, at 3840x2160, the average frame rates drop to 81.9 FPS for Low, 67.1 FPS for Medium, 54.7 FPS for High, and 43.8 FPS for Ultra. At 4K, the difference between Low and Ultra is 38.1 FPS, and the GPU is clearly the limiting factor across all presets. This data confirms that the combo is capable of a wide range of experiences, from esports-level frame rates at 1080p to cinematic, high-fidelity gaming at 4K with adjusted settings.