The Technomancer
This combination provides smooth gameplay with an average of 115 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 55 | 64 | 83 |
| 1440p QHD | 78 | 100 | 117 | 152 |
| 1080p Full HD | 119 | 153 | 179 | 233 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 5 7500X3D + AMD Radeon RX 9070 XT, In-Depth Analysis
# The Technomancer with AMD Ryzen 5 7500X3D + AMD Radeon RX 9070 XT
The Technomancer, a 2016 action RPG, responds predictably to this modern desktop pairing of the AMD Ryzen 5 7500X3D and AMD Radeon RX 9070 XT. The measured frame rates across three resolutions and four quality presets reveal a system that is firmly GPU-limited at higher settings, yet capable of very high refresh rates at 1080p. The combo ranks 627th out of 2,825 tested combinations, placing it in the 78th percentile of all tested systems for this title, a strong showing that reflects the hardware's balance.
Resolution Scaling
The frame rate drop from 1080p to 4K is steep and consistent, indicating that the Radeon RX 9070 XT is the primary bottleneck as pixel count rises. At High settings, the average FPS falls from 153 at 1920x1080 to 100 at 2560x1440, a 35% reduction, and then to 55 at 3840x2160, a further 45% drop from 1440p. This pattern—where each resolution step costs roughly a third to nearly half of the remaining performance—is classic GPU-bound behavior; the CPU has ample headroom, but the GPU's rendering throughput diminishes as the pixel workload quadruples from 1080p to 4K.
At Low settings, the scaling is even more revealing. The average FPS at 1080p is 233, dropping to 152 at 1440p and 83 at 4K. The 1080p-to-1440p reduction of 81 FPS (35%) is proportionally similar to the High preset, but the absolute numbers are much higher, confirming that even at minimal graphical load, the GPU is still the limiting factor—the Ryzen 5 7500X3D's six cores and 12 threads are not holding the system back, as evidenced by the consistently high frame rates that scale with resolution rather than plateauing.
The Medium preset shows a similar trajectory: 179 FPS at 1080p, 117 at 1440p, and 64 at 4K. The step from 1080p to 1440p costs 62 FPS (35%), and from 1440p to 4K costs 53 FPS (45%). These percentages mirror the High preset almost exactly, suggesting that the relative performance scaling is independent of the specific quality setting—it is purely a function of resolution-driven pixel count. The Ultra preset, the most demanding, drops from 119 FPS at 1080p to 78 at 1440p (34% reduction) and then to 43 at 4K (45% reduction), again following the same proportional pattern.
What this data collectively indicates is that the limiting component is unequivocally the GPU. The RX 9070 XT, with its 16 GB of GDDR6 memory and 644.6 GB/s bandwidth, is powerful enough to deliver playable frame rates at 4K on High (55 FPS), but the scaling curve shows diminishing returns as resolution increases—a sign that the card's compute and memory subsystems are saturated. The CPU's role is minimal in this title, as evidenced by the fact that even at 1080p Low (233 FPS), the system does not hit a wall that would indicate processor limitation; instead, the frame rate continues to climb, limited only by the GPU's ability to render frames.
Settings Recommendations
The measured data offers clear guidance on which preset delivers the best experience, depending on the target resolution and refresh rate. At 1920x1080, the High preset at 153 FPS average is the sweet spot for most users: it provides a smooth, high-refresh experience that exceeds the 144 Hz threshold common on modern monitors, while the jump to Ultra only costs 34 FPS (down to 119) for marginal visual gains. The Low preset at 233 FPS is excessive for all but the most extreme 240 Hz displays, and the Medium preset at 179 FPS offers no meaningful advantage over High for the additional visual fidelity trade-off.
At 2560x1440, the High preset at 100 FPS average is again the recommended choice. It maintains a triple-digit frame rate that is ideal for 144 Hz panels, while Ultra drops to 78 FPS—still playable but below the refresh-rate ceiling. The Medium preset at 117 FPS provides a 17% uplift over High, which could be worthwhile for users who prioritize frame rate over visual quality, but the difference between Medium and High is typically less noticeable than the difference between High and Ultra. The Low preset at 152 FPS is unnecessary unless the user is chasing maximum refresh rates.
At 3840x2160, the situation changes. The High preset at 55 FPS average is just below the 60 FPS target for smooth gameplay, while the Medium preset at 64 FPS achieves it with a modest 16% improvement. The Ultra preset at 43 FPS is below the playable threshold for most users, and the Low preset at 83 FPS sacrifices too much visual quality for a 30% gain over Medium. Therefore, the Medium preset is the optimal choice for 4K gaming on this system: it delivers 64 FPS average with a minimum of 55 FPS and a maximum of 74 FPS, providing a consistent, playable experience without the visual compromise of Low.
Across all resolutions, the data suggests that High is the default recommendation for 1080p and 1440p, while Medium is the pragmatic choice for 4K. The Ultra preset's additional demands yield insufficient frame rate returns at higher resolutions, making it viable only at 1080p where the 119 FPS average remains acceptable. The Low preset, while delivering the highest frame rates, is rarely necessary given the already high performance at Medium and High.
FAQ
Q: What is the best resolution for this combo in The Technomancer?
A: Based on the measured data, 2560x1440 at High settings offers the best balance, delivering 100 FPS average. This provides a high-refresh experience while maintaining visual quality, compared to 4K where the 55 FPS average at High is below the 60 FPS threshold.
Q: How does the 4K Ultra preset perform?
A: The 4K Ultra preset averages 43 FPS, which is below the playable threshold for most users. This is a 22% drop from the High preset's 55 FPS, indicating that Ultra is too demanding for this GPU at 4K resolution.
Q: Can this system achieve 144 FPS at 1080p?
A: Yes, at 1080p High settings the average FPS is 153, exceeding the 144 FPS target. The Medium preset also achieves 179 FPS, while Low reaches 233 FPS, all of which are above the 144 FPS threshold.
Q: What is the minimum FPS observed in the measured data?
A: The lowest minimum FPS recorded is 55, which occurs at 4K Medium settings. This represents the 55 FPS minimum with a 64 FPS average and 74 FPS maximum, indicating a consistent frame time at that preset.
Q: Is the system CPU-limited or GPU-limited in this game?
A: The data shows GPU-limited behavior. The frame rate scaling from 1080p to 4K is consistent across all presets, with proportional drops of approximately 35% to 45% per resolution step, indicating the GPU is the bottleneck. The CPU's high single-thread performance (3,494 in Passmark) does not constrain frame rates.
Q: How does the combo rank among all tested systems for this game?
A: The combo ranks 627th out of 2,825 tested combinations, placing it in the top 22% of all systems tested for The Technomancer. This is a strong ranking, reflecting the hardware's capability in this title.
Measured FPS Breakdown
At 1920x1080, the system delivers its highest frame rates. The Low preset averages 233 FPS, followed by Medium at 179 FPS (with a minimum of 152 and maximum of 205), High at 153 FPS, and Ultra at 119 FPS. The spread from Low to Ultra is 114 FPS, representing a 49% reduction in performance from the lowest to highest quality preset. The Medium preset's minimum FPS of 152 indicates that even in demanding scenes, the system stays well above the 144 Hz refresh rate, while the maximum of 205 shows headroom for less demanding moments.
At 2560x1440, the frame rates drop but remain strong. Low averages 152 FPS, Medium 117 FPS (minimum 99, maximum 134), High 100 FPS, and Ultra 78 FPS. The reduction from 1080p is consistent across presets: Low drops by 81 FPS (35%), Medium by 62 FPS (35%), High by 53 FPS (35%), and Ultra by 41 FPS (34%). The Medium preset's minimum FPS of 99 is just below the 100 FPS average for High, indicating that Medium provides a more consistent experience at this resolution.
At 3840x2160, the frame rates become more modest. Low averages 83 FPS, Medium 64 FPS (minimum 55, maximum 74), High 55 FPS, and Ultra 43 FPS. The drop from 1440p is steeper: Low falls by 69 FPS (45%), Medium by 53 FPS (45%), High by 45 FPS (45%), and Ultra by 35 FPS (45%). This consistent 45% reduction from 1440p to 4K across all presets reinforces the GPU-bound nature of the system, as the pixel count increase from 3.7 million to 8.3 million (2.25x) overwhelms the GPU's rendering capacity.
The data also reveals that the Medium preset is the only one at 4K with a recorded minimum FPS (55), and its maximum of 74 FPS shows a 35% variation between minimum and maximum. This suggests that even at Medium settings, the GPU's workload fluctuates significantly in demanding scenes, though the 55 FPS minimum remains above the 30 FPS playability threshold.
How This Combo Ranks
The combination of the AMD Ryzen 5 7500X3D and AMD Radeon RX 9070 XT ranks 627th out of 2,825 tested combos for The Technomancer, positioning it in the 78th percentile of all systems tested. This is a strong ranking that reflects the hardware's ability to handle this title well, though it is not at the very top of the leaderboard—there are 626 combos that perform better in this game.
The ranking suggests that the RX 9070 XT, despite its modern RDNA 4.0 architecture and 16 GB of VRAM, is not the absolute fastest GPU for this particular title. The GPU's average benchmark score of 13,543 and its 55th percentile ranking among all GPUs indicate that it sits in the mid-to-upper range of graphics cards, but The Technomancer's engine may favor other architectures or specific driver optimizations. The CPU's 89th percentile ranking among all CPUs (with an average benchmark score of 44,573) is comparatively stronger, suggesting that the processor is less of a limiting factor than the GPU in this pairing.
The fact that the combo ranks 627th out of 2,825, rather than higher, can be attributed to the GPU's mid-pack performance relative to other tested cards. The RX 9070 XT's nearest rivals in average benchmark score (AMD Radeon HD 7770M at 13,536, NVIDIA GeForce GTX 570 at 13,515) are much older, lower-end cards, which is surprising given the RX 9070 XT's specifications. This suggests that the benchmark database's scoring methodology may weight certain workloads differently, or that the RX 9070 XT's performance in this particular game is not representative of its overall capabilities.
CPU Role
The AMD Ryzen 5 7500X3D is a six-core, 12-thread processor from the 7000 series, based on the Raphael codename and Zen 4 architecture. It has a base clock of 4.00 GHz and a boost clock of 4.50 GHz, with 96 MB of shared L3 cache—a substantial amount that benefits gaming workloads. Its Passmark single-thread score of 3,494 and multithread score of 25,047 place it in the 89th percentile of all CPUs, indicating strong performance for this title.
In The Technomancer, the CPU's role is secondary to the GPU, as evidenced by the frame rate scaling data. The fact that 1080p Low produces 233 FPS without any apparent CPU bottleneck suggests that the processor has ample headroom to feed the GPU at all settings. The 6 cores and 12 threads are more than sufficient for this 2016 action RPG, which likely uses fewer threads than modern titles. The CPU's 96 MB L3 cache is particularly beneficial for gaming, as it reduces memory latency and improves data access patterns, though this advantage is less pronounced in a GPU-bound scenario.
The CPU's nearest rivals in average benchmark score include the Intel Core Ultra X9 388H (44,466, 0.2% higher), Intel Core i9-13950HX (44,342, 0.5% higher), and AMD Ryzen AI Max 385 (44,309, 0.6% higher), with the Intel Core i5-14600 slightly lower at 44,889 (0.7% lower). These scores indicate that the 7500X3D is competitive with high-end mobile and desktop chips, but its performance in this game is not the determining factor—the GPU is.
GPU Role
The AMD Radeon RX 9070 XT is a high-end graphics card from the Radeon RX 9000 series, based on the Navi 48 chip and RDNA 4.0 architecture. It features 4,096 shading units, 256 texture mapping units, and 128 render output units, with 64 ray tracing cores. The card has a base clock of 1660 MHz, a boost clock of 2970 MHz, and a game clock of 2400 MHz. Its memory subsystem consists of 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth.
In The Technomancer, the GPU is the primary determinant of frame rates, as shown by the consistent scaling from 1080p to 4K. The card's 16 GB of VRAM is more than sufficient for this game, even at 4K Ultra, where the 43 FPS average is limited by compute performance rather than memory capacity. The 644.6 GB/s memory bandwidth is also adequate, as the frame rate drops are proportional to pixel count rather than memory bandwidth saturation.
The RX 9070 XT's average benchmark score of 13,543 places it in the 55th percentile of all GPUs, which is lower than expected given its specifications. Its nearest rivals in average score are the AMD Radeon HD 7770M (13,536, 0.1% higher), NVIDIA GeForce GTX 570 (13,515, 0.2% higher), and NVIDIA P106-090 (13,470, 0.5% higher), with the AMD Radeon Pro 555 slightly lower at 13,407 (1% higher). This suggests that the benchmark database's scoring may not fully capture the RX 9070 XT's capabilities, or that the card's performance in certain workloads is not as strong as its architecture would suggest.
In practical terms for The Technomancer, the GPU delivers playable frame rates at 4K (55 FPS on High) and excellent performance at 1440p (100 FPS on High) and 1080p (153 FPS on High). The 4K Ultra preset at 43 FPS is the only configuration that falls below the 60 FPS target, indicating that the card's limits are reached at the highest settings and resolution. The GPU's 304 W TDP and dual-slot design reflect its high-end positioning, and the 16 GB VRAM provides future-proofing for more demanding titles, though this game does not stress that capacity.
Hardware Specifications
AMD Ryzen 5 7500X3D
AMD Radeon RX 9070 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500X3D + AMD Radeon RX 9070 XT in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 83.0 |
| 3840x2160 | Medium | 64.0 |
| 3840x2160 | High | 55.0 |
| 3840x2160 | Ultra | 43.0 |
| 2560x1440 | Low | 152.0 |
| 2560x1440 | Medium | 117.0 |
| 2560x1440 | High | 100.0 |
| 2560x1440 | Ultra | 78.0 |
| 1920x1080 | Low | 233.0 |
| 1920x1080 | Medium | 179.0 |
| 1920x1080 | High | 153.0 |
| 1920x1080 | Ultra | 119.0 |
The Technomancer with Ryzen 5 7500X3D + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with RX 9070 XT + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 5 7500X3D + RX 9070 XT
Explore FPS benchmarks for other games using this same hardware combination.