The Technomancer

The Technomancer

AVERAGE FPS
84
good

This combination provides smooth gameplay with an average of 84 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 31 40 47 61
1440p QHD 57 73 86 111
1080p Full HD 87 112 131 171

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 61
3840x2160 Medium 47
3840x2160 High 40
3840x2160 Ultra 31
2560x1440 Low 111
2560x1440 Medium 86
2560x1440 High 73
2560x1440 Ultra 57
1920x1080 Low 171
1920x1080 Medium 131
1920x1080 High 112
1920x1080 Ultra 87

The Technomancer with AMD Ryzen 5 7500X3D + AMD Radeon RX 6700 XT, In-Depth Analysis

Resolution Scaling

The Technomancer presents a classic scaling curve for this AMD pairing, with frame rates dropping predictably as resolution climbs. At 1920x1080 with High settings, the combo delivers 112 FPS average, which feels fluid for an action RPG. Moving to 2560x1440 at High drops the average to 73 FPS—a 35% reduction that remains comfortably playable. At 3840x2160 High, the average falls to 40 FPS, which is a 64% reduction from the 1080p baseline and starts to strain smoothness.

The scaling pattern reveals a system that is progressively more GPU-bound as resolution increases. The frame rate deltas between 1080p and 1440p are substantial but not punishing, suggesting the CPU still has headroom to feed the GPU at those settings. However, the jump from 1440p to 4K is severe: 73 to 40 FPS at High settings. This 45% drop indicates the Radeon RX 6700 XT's rendering throughput becomes the limiting factor at 4K, as the pixel count overwhelms the GPU's 13.21 TFLOPS of FP32 compute.

Looking at the Low preset, the scaling tells a different story. At 1080p Low, the combo hits 171 FPS, and at 1440p Low it reaches 111 FPS. Even at 4K Low, the average stays at 61 FPS. The 1080p to 4K drop at Low is 64%, similar to High, but the absolute values are much higher. This suggests that even when graphical load is minimized, the GPU still dominates the bottleneck at higher resolutions—the CPU is not the constraint here.

The Medium preset offers the most complete data, with min and max FPS recorded. At 1080p Medium, the average is 131 FPS with a minimum of 111 and maximum of 151. At 1440p Medium, the average drops to 86 FPS with a range of 73 to 98. At 4K Medium, the average falls to 47 FPS with a minimum of 40 and maximum of 54. The minimum frame rates at each resolution step down proportionally, indicating consistent frame pacing without sudden stutters.

Ultra settings show the steepest scaling penalty. The 1080p Ultra average is 87 FPS, which drops to 57 FPS at 1440p and 31 FPS at 4K. The 4K Ultra result is the only sub-30 average in the dataset, making it effectively unplayable for smooth action. The scaling from 1080p to 4K at Ultra is a 64% reduction, matching the other presets, but the starting point is already low enough that the 4K result becomes unusable.

The overall pattern indicates that 1440p is the sweet spot for this combination, with 1080p providing high refresh rate potential. The 4K results are marginal at best, playable only at Low settings. The data shows a GPU that scales predictably with resolution, typical of a mid-range RDNA 2.0 part when paired with a capable processor.

CPU Role

The AMD Ryzen 5 7500X3D brings six cores and twelve threads to this pairing, with a base clock of 4.00 GHz and a boost clock of 4.50 GHz. This is a 7000 series Raphael chip built on TSMC's 5 nm process, featuring 96 MB of shared L3 cache. The cache configuration is notable for a gaming-focused processor, as the large L3 pool helps keep frequently accessed data close to the cores.

In the context of The Technomancer, the CPU's role appears secondary to the GPU at most settings. The frame rates at 1080p Low—171 FPS average—suggest the processor is capable of feeding the GPU well beyond typical display refresh rates. The single-thread performance, measured at 3494 in PassMark's single-thread test, places this chip in the 89th percentile of all CPUs. This strong single-thread showing matters for an action RPG that likely relies on a primary game thread for core game logic.

The multithreaded score of 25047 in PassMark's multithread test indicates solid parallel performance, which helps with background tasks and any multi-threaded game systems. The CPU's nearest rivals in overall benchmark score include the Intel Core Ultra X9 388H at 44466 (0.2% faster), the Intel Core i9-13950HX at 44342 (0.5% faster), and the AMD Ryzen AI Max 385 at 44309 (0.6% faster). The Intel Core i5-14600 comes in at 44889, which is 0.7% slower than the 7500X3D's 44573 average benchmark score.

The data suggests the CPU is not the limiting factor in this game's performance. At 1080p High, the combo produces 112 FPS, and at Low it reaches 171 FPS. If the CPU were bottlenecked, we would expect to see smaller differences between Low and High presets at 1080p. The 59 FPS gap between Low and High at 1080p indicates the GPU is still doing significant work even at lower settings.

The 65 W TDP of the 7500X3D is modest, and the chip supports ECC memory with DDR5 dual-channel bandwidth of 83.2 GB/s. The PCIe Gen 5 interface with 24 lanes ensures the GPU has ample bandwidth for data transfer. The L3 cache at 96 MB shared is substantial, and the per-core L1 and L2 caches of 64 KB and 1 MB respectively provide a solid memory hierarchy for game workloads.

For The Technomancer specifically, the frame pacing data from Medium settings shows minimums that are about 85% of the average at each resolution. This consistency suggests the CPU is maintaining steady frame delivery without drops that would indicate processor stalls. The 7500X3D's architecture appears well-suited to sustaining frame rates in this title.

GPU Role

The AMD Radeon RX 6700 XT is the primary driver of performance in this pairing, and its specifications explain the resolution scaling observed. Built on the RDNA 2.0 architecture with the Navi 22 chip, this GPU features 12 GB of GDDR6 memory on a 192-bit bus, delivering 384.0 GB/s of bandwidth. The base clock runs at 2321 MHz with a boost clock of 2581 MHz, and the game clock is rated at 2424 MHz.

The 12 GB VRAM capacity is relevant for The Technomancer, particularly at 4K resolution where texture data can consume significant memory. The fact that the 4K Low preset achieves 61 FPS while 4K High drops to 40 FPS suggests that memory bandwidth and fill rate, rather than capacity, are the limiting factors. The GPU's pixel rate of 165.2 GPixel/s and texture rate of 413.0 GTexel/s determine how quickly it can process the higher pixel counts at 4K.

The GPU's benchmark results place it in the 72nd percentile of all GPUs, with an average score of 27425. Its nearest rival is the NVIDIA GeForce RTX 4070 Mobile at 27435 (0% difference), followed by the NVIDIA GeForce RTX 3090 at 27565 (0.5% faster). The AMD Radeon Pro Vega 20 scores 27839, which is 1.5% faster, while the NVIDIA RTX PRO 4000 Blackwell comes in at 27135, 1.1% slower. This places the RX 6700 XT in a competitive position, roughly matching a desktop RTX 3090 in aggregate compute benchmarks.

In The Technomancer, the GPU's role becomes dominant at 4K. The scaling from 1440p to 4K at High settings (73 to 40 FPS) represents a 45% drop, which is larger than the 35% drop from 1080p to 1440p. This accelerating decline with resolution is characteristic of a GPU hitting its fill rate or bandwidth ceiling. The compute throughput of 13.21 TFLOPS FP32, while respectable, is insufficient to maintain high frame rates at 4K Ultra, where the average falls to 31 FPS.

The memory clock of 2000 MHz (16 Gbps effective) combined with the 192-bit bus yields the 384.0 GB/s bandwidth figure. This is adequate for 1080p and 1440p gaming but becomes a constraint at 4K, where the larger frame buffer demands more bandwidth. The RDNA 2.0 architecture's 40 ray tracing cores are present but unlikely to be heavily utilized in this 2016 title, which predates widespread RT adoption.

The GPU's dual-slot design with a 230 W TDP and 550 W suggested PSU indicates a power-hungry but manageable part. The PCIe 4.0 x16 interface provides ample bandwidth, and the 1x HDMI 2.1 plus 3x DisplayPort 1.4a outputs support modern displays. The production status is end-of-life, but the performance data shows it remains relevant for 1080p and 1440p gaming in this title.

How This Combo Ranks

The combination of the AMD Ryzen 5 7500X3D and AMD Radeon RX 6700 XT ranks 1464th out of 2825 tested combos in The Technomancer. This places it in the 52nd percentile of all tested configurations, meaning roughly half of the combos tested perform better and half perform worse. This mid-pack ranking is somewhat surprising given the individual component strengths, but it reflects the game's specific demands and the GPU's limitations at higher resolutions.

The ranking context becomes clearer when considering the component-level percentiles. The CPU sits in the 89th percentile of all CPUs, while the GPU sits in the 72nd percentile. The combo's 52nd percentile ranking suggests that other factors—such as the game's optimization for certain hardware or the specific balance between CPU and GPU—drag the combined performance below what the individual parts might suggest.

The measured FPS data provides a more nuanced view. At 1080p High, the combo achieves 112 FPS, which would be competitive with many higher-ranked configurations. The 171 FPS at 1080p Low is a strong result that exceeds most display refresh rates. However, at 4K Ultra, the 31 FPS result is poor and would likely rank near the bottom for that specific resolution and settings combination.

The mid-pack ranking is likely driven by the 4K results pulling down the overall score. The game's measured performance at 1080p and 1440p is solid, but the 4K performance is mediocre. Since the ranking likely aggregates across resolutions and settings, the weak 4K Ultra result (31 FPS) and marginal 4K High result (40 FPS) contribute negatively. The GPU's 12 GB VRAM and bandwidth are sufficient for lower resolutions but not for 4K in this title.

Compared to the GPU's nearest rivals, the RTX 3090 is only 0.5% faster in aggregate benchmarks, yet the RTX 3090's larger memory bus and higher bandwidth would likely produce much better 4K results in this game. This suggests the combo ranking is more sensitive to the GPU's memory subsystem than its compute throughput. The 384.0 GB/s bandwidth is a bottleneck at 4K, which the ranking reflects.

The CPU's strong single-thread performance (3494 in PassMark) and 96 MB L3 cache help at lower resolutions where the GPU can keep up. The 89th percentile CPU ranking indicates the processor is not holding the system back. The combo's 52nd percentile ranking is therefore attributable to the GPU, which at the 72nd percentile is a weaker link in the chain.

Settings Recommendations

Based on the measured data, the optimal settings depend on the target resolution and desired frame rate. For 1080p displays, the High preset at 112 FPS average provides an excellent balance of visual quality and performance. The Ultra preset at 87 FPS is also viable if visual fidelity is prioritized, as it remains above 60 FPS. The Low preset at 171 FPS is excessive for most displays but useful for high refresh rate monitors.

At 1440p, the High preset at 73 FPS is the recommended choice for smooth gameplay. The Medium preset at 86 FPS offers a slightly higher frame rate with reduced visual quality, and the difference between Medium and High is 13 FPS. The Ultra preset at 57 FPS is borderline, dipping below 60 FPS, and may cause noticeable stutter in fast-paced combat. The Low preset at 111 FPS is the best choice for competitive play or if frame rate consistency is paramount.

For 4K displays, the options are limited. The Low preset at 61 FPS is the only setting that maintains a playable average above 60 FPS. The Medium preset at 47 FPS is playable but not smooth, and the High preset at 40 FPS will feel sluggish. The Ultra preset at 31 FPS is not recommended for action gameplay. The data shows that 4K gaming with this combo requires significant graphical compromises.

The Medium preset provides the only complete min/max FPS data across all resolutions, which allows for frame pacing analysis. At 1080p Medium, the minimum of 111 FPS is 85% of the average of 131 FPS, indicating consistent performance. At 1440p Medium, the minimum of 73 FPS is 85% of the average of 86 FPS. At 4K Medium, the minimum of 40 FPS is 85% of the average of 47 FPS. This consistent 85% ratio suggests stable frame delivery without major hitches.

The best experience per the measured rows is at 1440p High, where 73 FPS average provides smooth gameplay with good visual quality. This resolution balances the GPU's capabilities with the CPU's strengths, avoiding the 4K bottleneck while offering more detail than 1080p. Users with 1440p displays should prioritize High settings for the best experience.

For users with 1080p displays, the High preset at 112 FPS is the clear winner, as it provides a 25 FPS improvement over Ultra while the visual difference between High and Ultra is typically minor in this title. The 4K Low preset at 61 FPS is acceptable for users who must game at 4K, but the graphical downgrade from High to Low is substantial.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The AMD Ryzen 5 7500X3D paired with the AMD Radeon RX 6700 XT achieves an average of 112 FPS at 1920x1080 with High settings in The Technomancer.

Q: Can this combo handle 4K gaming in The Technomancer?

A: At 3840x2160, the Low preset averages 61 FPS, which is playable. The Medium preset averages 47 FPS, High averages 40 FPS, and Ultra averages 31 FPS. Only the Low preset maintains an average above 60 FPS.

Q: How does this combo rank among all tested configurations?

A: The combination ranks 1464th out of 2825 tested combos in The Technomancer, placing it in the 52nd percentile of all tested configurations.

Q: What is the minimum FPS at 1440p Medium settings?

A: At 2560x1440 with Medium settings, the measured minimum FPS is 73, with an average of 86 and a maximum of 98.

Q: Which settings preset provides the best balance at 1440p?

A: The High preset at 1440p delivers 73 FPS average, which is the recommended balance. The Medium preset offers 86 FPS but with reduced visual quality, while Ultra drops to 57 FPS.

Q: How does the GPU compare to its nearest rival in aggregate benchmarks?

A: The AMD Radeon RX 6700 XT scores 27425 on average, which is 0% different from the NVIDIA GeForce RTX 4070 Mobile at 27435 and 0.5% slower than the NVIDIA GeForce RTX 3090 at 27565.

Hardware Specifications

AMD Ryzen 5 7500X3D

Cores / Threads 6 / 12
Base Clock 4000 MHz
Boost Clock 4500 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

AMD Radeon RX 6700 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2581 MHz MHz
TDP 230 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500X3D + AMD Radeon RX 6700 XT in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 61.0
3840x2160 Medium 47.0
3840x2160 High 40.0
3840x2160 Ultra 31.0
2560x1440 Low 111.0
2560x1440 Medium 86.0
2560x1440 High 73.0
2560x1440 Ultra 57.0
1920x1080 Low 171.0
1920x1080 Medium 131.0
1920x1080 High 112.0
1920x1080 Ultra 87.0

The Technomancer with Ryzen 5 7500X3D + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with RX 6700 XT + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with Ryzen 5 7500X3D + RX 6700 XT

Explore FPS benchmarks for other games using this same hardware combination.