The Technomancer
This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 19 | 25 | 30 | 40 |
| 1440p QHD | 35 | 48 | 59 | 71 |
| 1080p Full HD | 60 | 71 | 86 | 113 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Technomancer with AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1660 Ti, In-Depth Analysis
The Technomancer is a 2016 Action RPG that stresses the GPU heavily, and the pairing of an AMD Ryzen 5 7500F with a NVIDIA GeForce GTX 1660 Ti produces a clear picture of where the bottleneck lies. The benchmark data shows a system that is capable of smooth 1080p play, but which demands careful settings management at higher resolutions. The CPU is far more powerful than the GPU, meaning the graphics card is the primary limiter in almost every scenario.
Resolution Scaling
The measured FPS data shows a steep performance cliff as resolution increases, which is the classic signature of a GPU-bound workload. At 1920x1080 with High settings, the combo averages 70.9 FPS. Moving to 2560x1440 drops that to 48.4 FPS, a reduction of roughly 32%. The jump to 3840x2160 is even more punishing, with the average falling to 24.6 FPS, which is only about 35% of the 1080p figure.
This scaling pattern reveals that the GTX 1660 Ti is the limiting component. The Ryzen 5 7500F, with its 6 cores and 12 threads boosting up to 5.00 GHz, has ample headroom to feed the GPU at all resolutions. The data indicates that the CPU is not the constraint; the frame rate is dictated almost entirely by the GPU's ability to render pixels. The gap between Low and Ultra settings at each resolution further confirms this, as the spread widens significantly at 4K, where the GPU is most taxed.
At 1080p, the GPU still has enough raw power to deliver high frame rates, but the scaling from Low to Ultra shows a 53.1 FPS difference (112.6 to 59.5). At 1440p, that spread narrows to 35.9 FPS (70.8 to 34.9), and at 4K it shrinks to 21.7 FPS (40.2 to 18.5). The shrinking delta between presets at higher resolutions is a direct result of the GPU becoming the sole bottleneck; it cannot render more frames regardless of the reduced workload from lower settings.
FAQ
Q: Can this system run The Technomancer smoothly at 1080p?
A: Yes, the data shows it is very capable. At 1920x1080, the average FPS is 70.9 on High settings and 85.8 on Medium, both well above the threshold for smooth gameplay. Even at Ultra, it maintains a playable 59.5 FPS average.
Q: Is the Ryzen 5 7500F or the GTX 1660 Ti the bottleneck?
A: The GPU is unequivocally the bottleneck. The Ryzen 5 7500F scores 6379 in the 3dmark_max_threads test and 3218 in Cinebench R23 single-core, placing it in the 82nd percentile of all CPUs. The GTX 1660 Ti, in contrast, sits in the 55th percentile of GPUs. The massive performance disparity, combined with the steep FPS drops at higher resolutions, confirms the graphics card limits the system.
Q: How does the CPU compare to its direct rivals?
A: The Ryzen 5 7500F's average benchmark score of 24993 is essentially identical to its nearest competitors. It is 0.1% ahead of the Intel Core i7-11850H and 0.4% ahead of the AMD Ryzen 9 6900HX, while being 0.3% behind both the AMD Ryzen 7 2700X and the AMD Ryzen 5 8400F. These are negligible differences in real-world gaming.
Q: What is the best resolution to play at with this combo?
A: The data strongly suggests 1920x1080 is the optimal choice. All four settings presets at this resolution produce average frame rates above 59 FPS. At 2560x1440, only Low (70.8 FPS) and Medium (59.1 FPS) are playable, while High (48.4 FPS) and Ultra (34.9 FPS) fall short of a smooth experience.
Q: Is the GTX 1660 Ti a strong performer compared to other GPUs?
A: The data shows it is a mid-range card. Its average benchmark score of 13925 puts it in the 55th percentile of all GPUs. It is 0.4% faster than the AMD Radeon RX 570X and 0.8% faster than the NVIDIA GeForce GTX 680, but 0.7% slower than the NVIDIA Tesla K10 and 0.8% slower than the NVIDIA RTX A2000 Mobile.
Q: Does the game scale well with CPU threads?
A: The CPU's benchmark scores show strong multi-threading, with a 3dmark_16_threads score of 6376 and a Cinebench R23 multi-core score of 22799. However, the game is clearly GPU-limited, so the CPU's 12 threads are not the deciding factor in the measured FPS results.
How This Combo Ranks
In the database of tested combinations for The Technomancer, this CPU-GPU pairing ranks 1438 out of 1656 tested combos. This places it in the lower 14th percentile of all systems benchmarked for this specific title. This low ranking is a direct consequence of the GPU's modest performance relative to other available graphics cards.
The rank is not a reflection of the CPU's capability, as the Ryzen 5 7500F is a high-performing processor. Rather, it is a measure of the entire system's combined gaming performance in this heavy game. The data indicates that while this combo is perfectly adequate for 1080p gaming, it is outclassed by a significant majority of other tested systems when looking at overall frame rates across all resolutions. The ranking highlights that the GTX 1660 Ti, while a competent card, holds the Ryzen 5 7500F back from achieving a higher placement in the benchmark charts.
Measured FPS Breakdown
The measured FPS data provides a complete picture of the system's performance. At 1920x1080, the average frame rates are as follows: Low settings produce 112.6 FPS, Medium produces 85.8 FPS, High produces 70.9 FPS, and Ultra produces 59.5 FPS. This is a very solid 1080p experience where even the highest preset yields a playable frame rate.
Moving to 2560x1440, the averages drop considerably. Low settings yield 70.8 FPS, Medium yields 59.1 FPS, High yields 48.4 FPS, and Ultra yields 34.9 FPS. At this resolution, the system is best suited for Medium settings or lower to maintain smoothness. The 1440p High preset is borderline, and Ultra should be avoided.
At 3840x2160, the system struggles. Low settings average 40.2 FPS, Medium averages 30.2 FPS, High averages 24.6 FPS, and Ultra averages just 18.5 FPS. None of these presets provide a consistently smooth experience at 4K, confirming that this resolution is beyond the GTX 1660 Ti's comfortable range for this game.
Settings Recommendations
Based on the measured data, the optimal experience is found at 1920x1080 with High settings. This preset delivers an average of 70.9 FPS, which is comfortably above the 60 FPS target for smooth play. The jump from Medium to High costs 14.9 FPS (85.8 to 70.9) but provides a significant visual upgrade. Ultra, while playable at 59.5 FPS, offers diminishing returns for the performance hit.
For users with a 1440p monitor, the data suggests using Medium settings. This preset achieves a 59.1 FPS average, which is just at the edge of playability. Dropping to Low yields 70.8 FPS for a more consistent frame rate, but sacrifices visual fidelity. The High preset at 48.4 FPS will be noticeably less smooth, and Ultra at 34.9 FPS is not recommended for action gameplay.
The 4K resolution is not recommended with this hardware. Even at Low settings, the 40.2 FPS average is below the smoothness threshold. The data shows that the GTX 1660 Ti lacks the raw throughput necessary for a pleasant experience at 3840x2160 in The Technomancer.
CPU Role
The AMD Ryzen 5 7500F is a formidable processor that is not the limiting factor in this system. It features 6 cores and 12 threads with a base clock of 3.70 GHz and a boost clock of 5.00 GHz, built on the Zen 4 architecture. Its benchmark scores are impressive, including a Cinebench R23 multi-core score of 22799 and a single-core score of 3218, with a Geekbench single-core score of 2759.
The CPU's performance is further underscored by its 82nd percentile ranking among all CPUs. In the database, it is virtually tied with its nearest rivals, being 0.1% faster than the Intel Core i7-11850H and 0.4% faster than the AMD Ryzen 9 6900HX. This indicates that the Ryzen 5 7500F provides more than enough computational power for The Technomancer.
The game's performance is entirely dictated by the GTX 1660 Ti. The GPU's 6 GB of GDDR6 memory and 1536 shading units are the primary determinants of the frame rates seen in the measured data. The CPU's role is to feed the GPU with data, and in this case, it does so without breaking a sweat. The measured FPS scaling across resolutions confirms that the graphics card is the bottleneck, and the Ryzen 5 7500F is essentially idle in comparison, waiting for the GPU to catch up.
Hardware Specifications
AMD Ryzen 5 7500F
NVIDIA GeForce GTX 1660 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500F + NVIDIA GeForce GTX 1660 Ti in The Technomancer
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 40.2 |
| 3840x2160 | Medium | 30.2 |
| 3840x2160 | High | 24.6 |
| 3840x2160 | Ultra | 18.5 |
| 2560x1440 | Low | 70.8 |
| 2560x1440 | Medium | 59.1 |
| 2560x1440 | High | 48.4 |
| 2560x1440 | Ultra | 34.9 |
| 1920x1080 | Low | 112.6 |
| 1920x1080 | Medium | 85.8 |
| 1920x1080 | High | 70.9 |
| 1920x1080 | Ultra | 59.5 |
The Technomancer with Ryzen 5 7500F + Other GPUs
See how The Technomancer performs with the same CPU but different graphics cards.
The Technomancer with GTX 1660 Ti + Other CPUs
See how The Technomancer performs with the same GPU but different processors.
Other Games with Ryzen 5 7500F + GTX 1660 Ti
Explore FPS benchmarks for other games using this same hardware combination.