The Technomancer

The Technomancer, a 2016 Action RPG, presents an interesting test for the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3060 Ti pairing. The benchmark data reveals a configuration that is capable of high refresh rate play at 1080p and remains playable at higher resolutions, though with significant compromises required in visual fidelity. The measured results show a system where the GPU becomes the primary bottleneck as resolution increases, a classic pattern for a mid-range graphics card paired with a strong modern processor. This analysis breaks down the measured FPS across three resolutions and four quality presets, interprets the scaling behavior, and provides practical guidance on how to best configure the game for this specific hardware combination.

Resolution Scaling

The FPS data from The Technomancer shows a clear and predictable pattern of performance degradation as resolution climbs from 1920x1080 to 3840x2160. At the High preset, the average frame rate drops from 115 FPS at 1080p to 75 FPS at 1440p, and finally to 41 FPS at 4K. This represents a 35% performance loss when moving from 1080p to 1440p, and a further 45% loss when stepping up to 4K. The scaling is not linear, indicating that the rendering load increases disproportionately with pixel count, which is typical for a game that relies heavily on fill rate and memory bandwidth.

The pattern across all settings confirms that the RTX 3060 Ti is the limiting component at higher resolutions. At the Low preset, the frame rate drops from 175 FPS at 1080p to 115 FPS at 1440p, a 34% reduction, and then to 63 FPS at 4K, a 45% reduction from 1440p. The consistency of these percentages across different quality settings strongly suggests that the GPU's raw compute and memory subsystems are saturated before the CPU becomes a factor. The Ryzen 5 7400F, with its 6 cores and 12 threads, is clearly capable of feeding the GPU at 1080p, but at 4K the GPU simply cannot keep up with the increased pixel throughput demands.

The most telling observation is the Ultra preset behavior. At 1080p, the Ultra preset achieves 90 FPS, which is still highly playable. However, at 1440p, this drops to 59 FPS, and at 4K, it falls to 32 FPS, which is below the threshold for smooth gameplay. This shows that the Ultra preset is only viable at 1080p for this combination. The scaling from 1440p to 4K at Ultra is a 46% performance hit, which is the steepest drop among all settings, suggesting that the Ultra preset adds effects that are particularly demanding on the GPU's memory bandwidth, which is rated at 448.0 GB/s.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the dominant factor in this game's performance, and its 8 GB of GDDR6 memory on a 256-bit bus plays a critical role. The memory bandwidth of 448.0 GB/s is a key specification that directly impacts how well the card handles higher resolutions. The data shows that at 4K with Medium settings, the average FPS is 48, with a minimum of 41 and a maximum of 56. The relatively narrow spread between min and max FPS at this setting suggests that the GPU is consistently hitting a memory bandwidth ceiling rather than experiencing occasional spikes in demand.

The GPU's clock speeds, with a base of 1410 MHz and a boost of 1665 MHz, are modest by modern standards, but they are sufficient to deliver the measured performance. The chip is built on the Ampere architecture using an 8 nm process from Samsung, which is older and less efficient than the 5 nm process used for the CPU. The 200 W TDP and the 550 W suggested PSU rating indicate that this is a power-hungry card, but the benchmark results show that it provides a balanced performance profile for a game like The Technomancer, which is not particularly demanding on modern hardware.

The RTX 3060 Ti's benchmark scores provide context for its in-game performance. Its Passmark G3D score of 20349 places it in the 59th percentile of all GPUs, indicating it is a mid-range performer. The 3DMark Steel Nomad DX12 score of 2626 is a more modern benchmark, and while it doesn't directly translate to The Technomancer's performance, it confirms that the card is capable of handling DirectX 12 workloads. The GPU's nearest rivals, including the AMD Radeon RX 9060 (0.7% higher average score) and the AMD Radeon RX 5700 XT (1.4% lower average score), show that it sits in a competitive performance band, and the in-game results reflect this positioning.

Settings Recommendations

For the AMD Ryzen 5 7400F and RTX 3060 Ti combination, the High preset at 1920x1080 offers the best balance of visual quality and performance. The measured 115 FPS average at this setting provides a smooth experience on a 144Hz monitor, and the headroom above 100 FPS ensures that there is little risk of frame rate dips being noticeable. The Medium preset at 1080p delivers 135 FPS, which is higher, but the visual difference between Medium and High in The Technomancer is typically more noticeable than the 20 FPS difference in frame rate, so High is the recommended choice for most players.

At 2560x1440, the High preset remains the best option, with a measured 75 FPS average. This is comfortably above 60 FPS, which is the standard for smooth gameplay, and the 1440p resolution provides a significant sharpness improvement over 1080p. The Medium preset at 1440p yields 88 FPS, but the step down in visual quality is not worth the extra 13 FPS unless the user has a high refresh rate 1440p monitor and prioritizes frame rate above all else. The Ultra preset at 1440p drops to 59 FPS, which is playable but not ideal, and the visual gains over High are often subtle in this title.

For 3840x2160, the Low preset is the only viable option for a consistently playable experience, with an average of 63 FPS. The Medium preset at 4K achieves 48 FPS, which is borderline, and the High preset at 41 FPS is too low for smooth gameplay. The Ultra preset at 32 FPS is not recommended for anything other than taking screenshots. If a user insists on playing at 4K, the Low preset is the only choice, but the visual compromises are significant, and the performance is still not as stable as it would be at 1440p.

Measured FPS Breakdown

The complete measured FPS data for this combo is as follows:

At 1920x1080, the performance ranges from excellent to adequate. The Low preset achieves an average of 175 FPS, which is exceptionally high and indicates that the CPU is not a bottleneck at this resolution. The Medium preset delivers 135 FPS, with a minimum of 114 and a maximum of 155 FPS, showing a consistent frame delivery. The High preset averages 115 FPS, which is still very smooth. The Ultra preset averages 90 FPS, which is the lowest at this resolution but still above the 60 FPS threshold.

At 2560x1440, the performance drops noticeably. The Low preset averages 115 FPS, which is still excellent. The Medium preset averages 88 FPS, with a minimum of 75 and a maximum of 101 FPS. The High preset averages 75 FPS, which is good. The Ultra preset averages 59 FPS, which is at the edge of playability.

At 3840x2160, the performance is constrained. The Low preset averages 63 FPS, which is playable. The Medium preset averages 48 FPS, with a minimum of 41 and a maximum of 56 FPS. The High preset averages 41 FPS, which is below smooth gameplay standards. The Ultra preset averages 32 FPS, which is not recommended for actual play.

How This Combo Ranks

In the database of tested combinations for The Technomancer, this specific pairing of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 3060 Ti ranks 1375 out of 2825 total combos. This places it in the 51st percentile of all tested configurations, meaning it performs better than roughly half of the systems tested. This ranking is consistent with the hardware's positioning: the CPU is a strong performer, sitting in the 83rd percentile of all CPUs with an average benchmark score of 32750, while the GPU is more modest, sitting in the 59th percentile of all GPUs with an average score of 16129.

The CPU's nearest rivals in the database, such as the Intel Core i5-14600T (0.1% higher average score) and the AMD Ryzen 7 PRO 6850H (0.2% lower average score), show that the Ryzen 5 7400F is a competitive mid-range processor. The GPU's nearest rivals, including the AMD Radeon RX 5700 XT (1.4% lower average score) and the AMD Radeon Pro 5600M (1.4% lower average score), confirm that the RTX 3060 Ti is a solid, if not outstanding, performer. The combination's mid-pack ranking reflects that while the CPU has headroom, the GPU limits the overall gaming experience in this title, particularly at higher resolutions.

FAQ

Q: What is the best resolution to play The Technomancer with this CPU and GPU combo?

A: The data shows that 1920x1080 offers the highest frame rates, with the High preset achieving 115 FPS. At 2560x1440, the High preset drops to 75 FPS, which is still playable, but the 1080p experience is significantly smoother. For the best balance of visual quality and performance, 1080p with the High preset is recommended.

Q: Can this system handle 4K gaming in The Technomancer?

A: At 3840x2160, the only preset that achieves a playable average FPS above 60 is Low, which hits 63 FPS. The Medium preset drops to 48 FPS, and High and Ultra fall to 41 FPS and 32 FPS respectively. 4K is only viable with significant visual compromises.

Q: How does the RTX 3060 Ti's 8 GB of VRAM affect performance?

A: The 8 GB of GDDR6 memory on a 256-bit bus provides a bandwidth of 448.0 GB/s. At 4K with Medium settings, the minimum FPS of 41 and maximum of 56 suggest that the card is consistently constrained by memory bandwidth, limiting the frame rate.

Q: Is the Ryzen 5 7400F a bottleneck for the RTX 3060 Ti in this game?

A: The benchmark results indicate that the CPU is not a bottleneck. At 1080p with Low settings, the combo achieves 175 FPS, which is very high. The consistent performance scaling with resolution suggests that the GPU is the limiting factor, as the CPU has enough headroom to feed the GPU at all tested settings.

Q: What is the difference in performance between Medium and High settings at 1440p?

A: At 2560x1440, the Medium preset averages 88 FPS, while the High preset averages 75 FPS. The difference of 13 FPS is relatively small, and the visual improvement from Medium to High is often worth the minor frame rate loss unless you have a 144Hz monitor and demand the highest possible frame rate.

Q: How does this combo rank compared to other systems tested in this game?

A: This combination ranks 1375 out of 2825 tested combos, placing it in the middle of the pack. The CPU is in the 83rd percentile of all CPUs, while the GPU is in the 59th percentile, indicating that the overall ranking is held back by the graphics card's mid-range performance.