The Technomancer

The AMD Ryzen 5 5600X paired with the AMD Radeon RX 9070 delivers a robust experience in The Technomancer, with the data indicating a CPU that is more than capable of keeping pace with the GPU across most settings. The 5600X offers 6 cores and 12 threads, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz, built on the Zen 3 architecture. This combination places the processor in the 78th percentile among all CPUs, with an average benchmark score of 20680. In the context of this game, the CPU's single-thread performance is particularly relevant, as evidenced by its Cinebench R23 single-core score of 2622 and Geekbench single-core score of 2111. These strengths ensure that the processor does not bottleneck the RX 9070, especially at lower resolutions where frame rates are highest. The benchmark results show that at 1080p with Low settings, the system achieves 218.6 FPS, which is a strong indicator that the CPU can feed the GPU effectively even when the graphical load is light. The data suggests a well-balanced pairing, with the CPU's performance ceiling being high enough to support the GPU's output in most scenarios.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 5 5600X is a 6-core, 12-thread processor with a 32 MB L3 cache, which is a configuration that handles modern game engines well. Its boost clock of 4.60 GHz provides the necessary speed for game logic and physics calculations, which often rely on fewer threads. The CPU's performance in synthetic benchmarks like Cinebench R23 (18578 multi-core, 2622 single-core) and Passmark (21858 multithread, 3364 single-thread) indicates a balanced capability for both heavily threaded tasks and the lighter, latency-sensitive workloads typical of game simulation. When examining the measured FPS, the 5600X's role becomes clearer. At 1080p Low, the system posts 218.6 FPS, a figure that drops to 141.9 FPS at High settings. This 35% reduction in frame rate when moving from Low to High at the same resolution shows that while the CPU can push very high frame rates, the GPU is already becoming a limiting factor as settings increase. The CPU's nearest rivals include the AMD Ryzen 5 5600GT, which scores 0.3% lower on average, and the Intel Core i7-10700, also 0.3% lower. This data confirms that the 5600X is positioned solidly in the mid-range, with enough headroom to avoid holding back the RX 9070 in The Technomancer, though the game's engine does not appear to be heavily multi-threaded based on the frame rate scaling.

Settings Recommendations — which preset gives the best experience per the measured rows

Analyzing the measured frame rates, the Medium preset offers the most balanced experience across all resolutions, providing a significant uplift in performance over High and Ultra without the visual compromise of Low. At 1080p, Medium achieves 166.5 FPS, which is 17% higher than High (141.9 FPS) and 46% higher than Ultra (113.9 FPS). The jump from Low to Medium at 1080p is a 24% drop (from 218.6 FPS to 166.5 FPS), but the visual quality improvement is typically substantial for a modest performance cost. At 1440p, Medium delivers 110.1 FPS, which remains well above the 60 FPS threshold for smooth gameplay, while High drops to 96.4 FPS and Ultra falls to 73.8 FPS. For 4K, Medium is the only preset that stays near playable territory, hitting 58.8 FPS. High at 4K drops to 50 FPS, and Ultra falls to 38 FPS, which may be too low for many users. The data suggests that Ultra is not a reasonable choice for this combination, as it consistently offers the lowest frame rates with diminishing returns. Therefore, for users with high refresh rate 1080p or 1440p monitors, Medium or High are the best options, while 4K users should stick to Medium or Low to maintain fluidity.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The frame rate scaling across resolutions reveals a clear shift in the bottleneck from the CPU to the GPU. At 1080p High, the system produces 141.9 FPS, which drops to 96.4 FPS at 1440p High (a 32% decrease) and then to 50 FPS at 4K High (a 65% decrease from 1080p). This steep decline at 4K indicates that the RX 9070 is the primary limiting factor at higher resolutions, as the CPU's performance headroom is not exhausted until frame rates reach very high levels. The pattern is similar across all settings. For example, at Low settings, the system goes from 218.6 FPS at 1080p to 141.8 FPS at 1440p (35% drop) and 76.2 FPS at 4K (65% drop from 1080p). The consistent ~65% reduction from 1080p to 4K across settings suggests that the GPU's rendering load scales predictably with pixel count, while the CPU maintains its ability to provide frames. At 1080p Low, the 218.6 FPS figure is likely near the CPU's maximum output in this game, but the fact that it scales down proportionally with resolution means the CPU is not the primary constraint at higher resolutions. The data shows that for 4K gaming, the GPU is definitely the component to watch, as even Medium settings only yield 58.8 FPS.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the expected frame rate at 1440p with High settings for this CPU and GPU combo?

A: The measured average FPS at 2560x1440 with High settings is 96.4 FPS, which is comfortably above the standard 60 FPS target for smooth gameplay.

Q: How does the Ryzen 5 5600X compare to its nearest rival, the Intel Core i7-10700, in terms of average benchmark score?

A: The Ryzen 5 5600X has an average benchmark score of 20680, which is 0.3% lower than the Intel Core i7-10700's score of 20746. This indicates near-identical overall performance between the two.

Q: Is the RX 9070 a good match for 4K gaming in The Technomancer?

A: The data shows that at 4K, the RX 9070 achieves 50 FPS on High and 58.8 FPS on Medium. For a locked 60 FPS experience, users may need to drop to Low settings, where the system hits 76.2 FPS.

Q: What is the maximum frame rate recorded for this configuration?

A: The highest average FPS is 218.6, achieved at 1920x1080 with Low settings. This figure represents the ceiling for this pairing in this game.

Q: How much of a performance difference is there between the Low and Ultra presets at 1080p?

A: At 1920x1080, Low settings produce 218.6 FPS, while Ultra settings produce 113.9 FPS. This is a 48% reduction in frame rate when moving from Low to Ultra, showing a significant cost for maximum visual fidelity.

Q: What is the GPU's percentile ranking among all GPUs, and how does it compare to the NVIDIA Quadro GV100?

A: The RX 9070 is in the 79th percentile among all GPUs, with an average benchmark score of 34780. This score is 0.3% higher than the NVIDIA Quadro GV100's score of 34677.

GPU Role — VRAM, clocks, and how they relate to this game's results

The AMD Radeon RX 9070 features 16 GB of GDDR6 memory on a 256-bit bus, providing 644.6 GB/s of bandwidth, which is ample for The Technomancer's textures and assets. The GPU operates with a base clock of 1330 MHz and a boost clock of 2520 MHz, with a game clock of 2070 MHz that reflects typical sustained performance. The 3584 shading units and 128 ROPs are key to the rasterization performance, and the data shows the GPU is the main driver of frame rate differences between settings. At 1080p High, the GPU produces 141.9 FPS, but this jumps to 166.5 FPS on Medium and 218.6 FPS on Low, indicating that the GPU's load varies significantly with preset. The RX 9070's benchmark scores, such as a Passmark G3D score of 25381 and a Geekbench OpenCL score of 133741, place it in the 79th percentile of all GPUs. Its nearest rival, the NVIDIA A2, scores 0.2% higher on average, while the AMD Radeon HD 7970 scores 0.7% lower. Interestingly, the GPU's performance scaling suggests that at 1080p Low, the system is likely CPU-bound, but as resolution and settings increase, the GPU becomes the definitive limiting factor, particularly at 4K where even Medium settings only reach 58.8 FPS.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured FPS data provides a comprehensive view of this configuration's performance across three resolutions and four presets. At 1920x1080, the system delivers its highest frame rates: Low averages 218.6 FPS, Medium averages 166.5 FPS, High averages 141.9 FPS, and Ultra averages 113.9 FPS. This resolution is clearly where the combo shines, with even Ultra maintaining over 100 FPS. Moving to 2560x1440, the frame rates drop significantly but remain playable: Low averages 141.8 FPS, Medium averages 110.1 FPS, High averages 96.4 FPS, and Ultra averages 73.8 FPS. The 1440p results show that High is still viable for high refresh rate monitors, while Ultra remains above 60 FPS. At 3840x2160, the GPU becomes the clear bottleneck: Low averages 76.2 FPS, Medium averages 58.8 FPS, High averages 50 FPS, and Ultra averages 38 FPS. The 4K data reveals that only Low settings provide a comfortable margin above 60 FPS, while Medium is borderline and High/Ultra are below the ideal threshold. The overall combo rank for this game is 571 out of 1656 tested combinations, placing it in the top third of all configurations. The data consistently shows that the RX 9070's performance scales predictably with resolution, while the Ryzen 5 5600X provides a stable foundation that does not introduce major frame rate inconsistencies.