The Technomancer

The Technomancer, a 2016 Action RPG, proves to be remarkably undemanding on modern hardware. The pairing of an AMD Ryzen 5 5600G with an NVIDIA GeForce RTX 5070 Ti delivers performance that is not merely playable but exceptionally high, ranking first among all tested configurations. This analysis breaks down the measured FPS data to show how the system scales across resolutions and settings, and what that reveals about the balance between the CPU and GPU in this specific title.

Resolution Scaling

The data shows a dramatic and expected drop in frame rates as resolution increases, but the absolute numbers remain so high that the game is never a challenge for this hardware. At 1080p with High settings, the system produces an average of 484 FPS. Moving to 1440p reduces this to 317 FPS, a 34.5% decrease. Stepping up to 4K (3840x2160) at High settings yields 175 FPS, which is a further 44.8% drop from the 1440p figure. This steep decline indicates that the rendering load is scaling heavily with pixel count, which is the typical behavior for a GPU-bound scenario.

The scaling pattern across all settings reveals the nature of the bottleneck. At 1080p Low, the system hits 586 FPS. At 1440p Low, it drops to 439 FPS, and at 4K Low, it reaches 242 FPS. The gap between 1080p and 1440p at Low settings is 147 FPS, while the gap between 1440p and 4K is 197 FPS. This widening delta as resolution increases is a classic sign of the GPU becoming the primary limiting factor. The RTX 5070 Ti is being tasked with more pixels, and its performance scales accordingly.

However, the CPU's role becomes more apparent at lower resolutions. The difference between 1080p High (484 FPS) and 1080p Ultra (364 FPS) is 120 FPS, which is a larger relative drop than the 42 FPS difference seen between 1440p High (317 FPS) and 1440p Ultra (238 FPS). At 1080p, the GPU has enough headroom to render frames so quickly that the CPU's ability to feed it draw calls and game logic becomes a factor. This is why the frame rate doesn't scale linearly with the settings increase; the CPU is nearing its limit of instruction throughput.

The 4K results tell a cleaner story. The progression from Low (242 FPS) to Medium (206 FPS) to High (175 FPS) to Ultra (131 FPS) shows a consistent and predictable decline. The 4K Ultra result of 131 FPS is still far above the 60 FPS threshold for smooth gameplay, meaning that even at the most demanding settings, the GPU is nowhere near being overwhelmed. The data suggests that while the GPU is the main scaling factor from 1080p to 4K, the CPU provides a hard ceiling at the lowest resolutions, preventing the system from exceeding the 586 FPS mark.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the dominant component in this pairing, and its specifications align perfectly with the measured performance. It features 16 GB of GDDR7 memory on a 256-bit bus, delivering a substantial 896.0 GB/s of memory bandwidth. For a game like The Technomancer, which is from the previous console generation, this memory subsystem is more than ample. The data shows no signs of a memory capacity or bandwidth bottleneck, even at 4K Ultra, where the 131 FPS average is far from any performance wall.

The GPU's clock speeds are also a key factor. The base clock is 2295 MHz, and the boost clock is 2452 MHz. These high frequencies, combined with the Blackwell 2.0 architecture's efficiency, allow the card to process the game's DirectX 12 workload with immense speed. The card's Passmark G3D score of 32974 and its 86th percentile ranking among all GPUs support the idea that this is a top-tier performer. The nearest rivals in the GPU benchmark data, such as the AMD Radeon RX 6900 XT with a score of 50951, show a deltaPct of -2.0, indicating the RTX 5070 Ti is just behind that specific card in general compute but still in the same performance class.

In The Technomancer, the GPU's role is to handle the raw pixel pushing and shader work. The measured FPS at 4K Ultra (131 FPS) confirms its raw power. The fact that the 4K Medium result (206 FPS) is 75 FPS higher than the Ultra result shows how much headroom the GPU has. The card is never the limiting factor in a way that would cause a poor experience; it is simply delivering frame rates that are far beyond what the game's engine can likely utilize to a smooth standard. The 16 GB VRAM capacity is also a future-proofing asset, ensuring that even if a mod or a more demanding scene were to increase memory usage, the card would not be constrained.

CPU Role

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture. It has a base clock of 3.90 GHz and a boost clock of 4.40 GHz. While it is not a top-tier CPU by modern standards, its performance in this game is more than sufficient. The CPU's benchmark scores, such as a Cinebench R23 multicore score of 10551 and a Passmark multithread score of 19717, place it in the 74th percentile of all CPUs. The data shows that its nearest rival, the Intel Core i3-1220P, has an almost identical average score, with a deltaPct of just 0.1%.

The CPU's role in The Technomancer is to manage the game's logic, physics, and draw calls. The game is not known for being CPU-intensive, and the data confirms this. At 1080p Low, the system achieves 586 FPS, which is likely near the practical limit for this CPU in any game. This is where the CPU's 12 threads and 16 MB of L3 cache become relevant. The processor is able to feed the GPU with enough data to sustain incredibly high frame rates, but it does appear to cap the system's absolute maximum output.

The difference between 1080p Medium (554 FPS) and 1080p High (484 FPS) is 70 FPS, while the difference between 1080p High and 1080p Ultra (364 FPS) is 120 FPS. This non-linear scaling suggests that as the graphics settings increase, the GPU starts to take on more of the workload, and the CPU's relative importance diminishes. The 5600G is not a bottleneck in the sense that it prevents playable frame rates; it only becomes a theoretical ceiling at extreme refresh rates. For a 144Hz or even 240Hz monitor, this CPU is perfectly capable of keeping up with the GPU at 1440p and 4K, as the FPS at those resolutions is still well above 144.

How This Combo Ranks

The combination of the Ryzen 5 5600G and the RTX 5070 Ti holds the number one rank in the database for The Technomancer, out of a total of 3696 tested combos. This is a remarkable result, given that the CPU is not a high-end part. The ranking is a direct consequence of the game's low system requirements, which allow the GPU's immense power to shine without being held back by the processor.

This top ranking is not a fluke; it is supported by the measured FPS data. The 4K Ultra score of 131 FPS is higher than what many other combinations would achieve at 1080p. The data indicates that the game is overwhelmingly GPU-bound at higher resolutions, and the RTX 5070 Ti is so powerful that it propels this mid-range CPU to the top of the chart. The GPU's 86th percentile ranking versus the CPU's 74th percentile shows that the graphics card is the stronger component, and in this title, that is the one that matters most.

The fact that this combo ranks first suggests that for older or less demanding titles, a powerful GPU can completely mask the limitations of a more modest CPU. The Ryzen 5 5600G is not a slow processor, but it is not in the same performance tier as the RTX 5070 Ti. Yet, in The Technomancer, the pairing results in the best possible performance. This is a useful data point for builders who are looking to pair a high-end GPU with an older or budget CPU for a specific game, as it shows that the CPU may not be the limiting factor in all scenarios.

Measured FPS Breakdown

The following is the complete measured frame rate data for The Technomancer with this hardware configuration. All numbers are average FPS unless otherwise noted.

At 1920x1080, the system performs as follows:

• Low: 586 FPS.
• Medium: 554 FPS, with a minimum of 471 FPS and a maximum of 637 FPS.
• High: 484 FPS.
• Ultra: 364 FPS.

At 2560x1440:

• Low: 439 FPS.
• Medium: 374 FPS, with a minimum of 318 FPS and a maximum of 430 FPS.
• High: 317 FPS.
• Ultra: 238 FPS.

At 3840x2160:

• Low: 242 FPS.
• Medium: 206 FPS, with a minimum of 175 FPS and a maximum of 237 FPS.
• High: 175 FPS.
• Ultra: 131 FPS.

The Medium settings are the only ones that provided a full range of min and max FPS data. For example, at 1080p Medium, the minimum was 471 FPS, which is still exceptionally high. At 4K Medium, the minimum was 175 FPS, which is the same as the average for 4K High. This suggests that even in the most demanding moments captured, the system never drops below what would be considered a very smooth experience. The difference between 1080p Low (586 FPS) and 1080p Ultra (364 FPS) shows a 222 FPS swing, which is significant, but the absolute floor is still above the refresh rate of most high-end monitors. The data clearly shows that this game is not a challenge for this hardware at any resolution or settings combination.

FAQ

Q: Is this CPU-GPU combo overkill for The Technomancer?

A: The data suggests yes. The system achieves 586 FPS at 1080p Low and 131 FPS at 4K Ultra. These numbers are far beyond what is needed for a smooth experience, indicating that the hardware has significant headroom for this title.

Q: Will I get better performance at 1080p or 4K?

A: The highest frame rates are at 1080p, with the Low setting producing 586 FPS. However, even at 4K Ultra, the average FPS is 131, which is still very high. The choice depends on whether you prefer maximum frame rates or maximum visual fidelity.

Q: Is the CPU or GPU the limiting factor in this game?

A: At 1080p, the CPU appears to be the limiting factor, as the frame rates are capped at around 586 FPS. At 4K, the GPU becomes the primary bottleneck, as the FPS drops significantly from 586 to 242 at Low settings, showing the GPU is working harder to render pixels.

Q: How does this combo rank compared to other systems?

A: This combination ranks number one out of 3696 tested combos in the database for The Technomancer. This is due to the GPU's immense power and the game's low system requirements.

Q: Is the 16 GB of VRAM in the RTX 5070 Ti useful for this game?

A: The game likely does not require that much VRAM. The data shows no performance issues related to memory capacity, as the frame rates are consistently high even at 4K Ultra. The 16 GB is a future-proofing feature, but it is not a necessity for this specific title.

Q: What are the FPS differences between High and Ultra settings at 1440p?

A: At 1440p High, the average FPS is 317. At 1440p Ultra, the average FPS drops to 238. This is a difference of 79 FPS, showing that the Ultra preset is significantly more demanding on the GPU.