The Technomancer

The AMD Ryzen 5 5600F and AMD Radeon RX 9070 combination delivers a highly capable experience in The Technomancer, but the data reveals a clear shift in system bottleneck as resolution scales. The pairing is strong, yet the GPU becomes the primary limiting factor at 4K, while the CPU holds its own at lower resolutions with significant headroom.

Resolution Scaling

The measured FPS data shows a predictable but steep decline as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 144 FPS at 1080p to 94 FPS at 1440p, a 35% reduction, and then further to 52 FPS at 4K, another 45% drop from the 1440p figure. This scaling pattern strongly indicates that the AMD Radeon RX 9070 is the dominant bottleneck at higher resolutions, as the workload shifts from the CPU to the GPU's rendering capabilities.

At 1080p, the system appears CPU-limited in certain scenarios, as evidenced by the relatively modest 31% performance gap between Low (202 FPS) and Ultra (112 FPS) settings. This suggests the Ryzen 5 5600F is capable of feeding the GPU with frames, but the GPU is still being pushed at these settings. The 1080p Medium settings result of 169 FPS, with a minimum of 143 FPS and maximum of 194 FPS, shows a solid frame pacing with a 51 FPS variance, indicating that the CPU can maintain consistent throughput.

The transition to 1440p reveals a more balanced system, with the High settings average of 94 FPS representing a 57% drop from the 1080p Low result. This is a substantial performance hit, but it aligns with the expected increase in pixel count. The 4K results show the GPU being pushed to its limits, with High settings dropping to 52 FPS and Ultra settings falling to just 40 FPS. This steep decline at 4K confirms that the RX 9070's rendering throughput is the primary constraint, as the CPU's role diminishes with higher resolution.

The scaling between Low and Ultra settings at each resolution provides insight into the system's headroom. At 4K, the difference between Low (79 FPS) and Ultra (40 FPS) is 39 FPS, a 49% reduction, which highlights the GPU's sensitivity to graphical fidelity. At 1080p, the same comparison shows a 90 FPS difference between Low (202 FPS) and Ultra (112 FPS), a 45% reduction, but the absolute numbers are much higher, indicating the CPU can keep up while the GPU is still being stressed. The data suggests that for 4K gaming, users should expect to lower settings to achieve playable frame rates, while 1080p and 1440p offer more flexibility.

CPU Role

The AMD Ryzen 5 5600F is a 6-core, 12-thread processor based on the Zen 3 architecture, using the Vermeer codename on a 7 nm process. It has a base clock of 3.00 GHz and a boost clock of 4.00 GHz, with a 65 W TDP. The processor features 64 KB of L1 cache per core, 512 KB of L2 cache per core, and a shared 32 MB L3 cache. This configuration is well-suited for gaming workloads, and the benchmark results show it performs competitively.

In the PassMark benchmark suite, the Ryzen 5 5600F scores 19,236 in multithreaded tests and 2,872 in single-threaded tests. Its average benchmark score is 36,945, placing it in the 85th percentile of all CPUs. This strong single-thread performance is crucial for The Technomancer, which likely relies on a limited number of threads for game logic and physics. The nearest rivals include the Intel Core Ultra 5 225 with an average score of 36,938 (0% delta), the AMD Ryzen 5 5500X3D at 37,018 (-0.2% delta), the AMD Ryzen AI 7 PRO 450 at 37,093 (-0.4% delta), and the Intel Core i9-12900T at 37,112 (-0.5% delta). This indicates the 5600F is essentially on par with these processors, with a negligible performance difference of less than 1%.

The CPU's role in The Technomancer is evident in the 1080p results. At Low settings, the system achieves 202 FPS, which is likely close to the CPU's maximum frame delivery capability. The fact that High settings only reduce this to 144 FPS, a 29% drop, suggests that the CPU has enough headroom to handle the increased draw calls and game logic at 1080p. However, at 4K, the CPU's influence wanes, as the GPU becomes the limiting factor. The data shows that the CPU can sustain high frame rates, but the GPU cannot keep up with the pixel count at higher resolutions.

The 6-core, 12-thread configuration is adequate for modern games, and the 32 MB L3 cache helps reduce memory latency. The processor supports DDR4 memory with a dual-channel bus and a bandwidth of 51.2 GB/s. While this is not high-end, it is sufficient for the demands of The Technomancer. The data shows that the CPU is not the primary bottleneck at 1440p or 4K, as the FPS drops are more attributable to GPU load.

GPU Role

The AMD Radeon RX 9070 is a high-performance graphics card based on the RDNA 4.0 architecture, using the Navi 48 chip on a 4 nm process. It features 3,584 shading units, 224 texture mapping units, and 128 render output units. The GPU has a base clock of 1330 MHz, a boost clock of 2520 MHz, and a game clock of 2070 MHz. It comes with 16 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 644.6 GB/s. The card also includes 56 ray tracing cores and supports DirectX 12 Ultimate, OpenGL 4.6, and Vulkan 1.4.

In synthetic benchmarks, the RX 9070 scores 25,381 in PassMark G3D and 13,1539 in Geekbench OpenCL. Its average benchmark score is 23,877, placing it in the 69th percentile of all GPUs. The nearest rivals include the NVIDIA GeForce GTX TITAN Z with an average score of 23,736 (0.6% delta), the AMD Radeon RX 6800S at 24,063 (-0.8% delta), the NVIDIA GeForce RTX 3080 Mobile at 23,628 (1.1% delta), and the NVIDIA GeForce RTX 2080 SUPER at 24,170 (-1.2% delta). This places the RX 9070 squarely in the mid-to-high-end tier, with performance within 1.2% of its closest competitors.

The GPU's role in The Technomancer is clearly the dominant factor at higher resolutions. At 4K, the card struggles to maintain high frame rates, with High settings yielding 52 FPS and Ultra settings dropping to 40 FPS. This is likely due to the increased pixel count and the game's graphical demands, which stress the GPU's shading units and memory bandwidth. The 16 GB of VRAM is ample for this game, so memory capacity is not a limiting factor. The 644.6 GB/s bandwidth is sufficient, but the raw compute power of the GPU is what determines performance at 4K.

At 1440p, the GPU shows better headroom, with High settings achieving 94 FPS and Low settings reaching 143 FPS. This suggests the card is well-suited for 1440p gaming, providing a smooth experience at high settings. At 1080p, the GPU is not the bottleneck, as the CPU limits frame rates in some scenarios. This is evidenced by the fact that the 1080p Low and High settings results (202 FPS and 144 FPS, respectively) are higher than the 1440p Low and High results (143 FPS and 94 FPS), indicating that the GPU still has performance to spare at 1080p.

The RX 9070's clock speeds and architecture are optimized for high-throughput rendering. The boost clock of 2520 MHz and game clock of 2070 MHz indicate a well-binned chip capable of sustained performance. However, the data shows that at 4K Ultra settings, the card is pushed to its limits, resulting in a 40 FPS average, which may be below the threshold for a smooth experience in fast-paced action RPG combat.

How This Combo Ranks

The combination of the AMD Ryzen 5 5600F and AMD Radeon RX 9070 ranks 857th out of 2,825 tested combos in The Technomancer. This places it in the top 30% of all combinations, indicating a strong overall performance. The rank reflects the balance between the CPU and GPU, and the data shows this combo is well-matched for 1080p and 1440p gaming, with 4K being the only area where the GPU's limitations become apparent.

The rank of 857 out of 2,825 suggests that while this combo is capable, there is room for improvement. The CPU's performance is on par with its nearest rivals, with a delta of less than 1% from all of them. The GPU, while ranking in the 69th percentile, has a wider performance gap to higher-tier cards. This combo is likely a strong choice for 1440p gaming, where the GPU can shine, but it may not be the top pick for 4K enthusiasts.

The ranking also indicates that the combo is well-balanced, as a weaker CPU would bottleneck the GPU at 1080p, and a weaker GPU would struggle at 4K. The data shows that the combo excels at 1440p, with High settings achieving 94 FPS and Medium settings at 110 FPS, providing a smooth and responsive experience. At 1080p, the combo achieves over 144 FPS at High settings, making it ideal for high-refresh-rate monitors. The 4K results, while playable at Medium settings (60 FPS), require lowering settings to achieve higher frame rates.

FAQ

Q: What is the average frame rate at 1440p with High settings?

A: The average frame rate at 2560x1440 with High settings is 94 FPS.

Q: How does the CPU compare to its nearest rival in terms of average benchmark score?

A: The AMD Ryzen 5 5600F has an average benchmark score of 36,945, which is within 0.5% of its nearest rivals, including the Intel Core Ultra 5 225 (36,938), AMD Ryzen 5 5500X3D (37,018), AMD Ryzen AI 7 PRO 450 (37,093), and Intel Core i9-12900T (37,112).

Q: What is the GPU's percentile ranking among all GPUs?

A: The AMD Radeon RX 9070 is in the 69th percentile of all GPUs based on its average benchmark score.

Q: What is the minimum FPS at 4K with Medium settings?

A: The minimum FPS at 3840x2160 with Medium settings is 51 FPS, with an average of 60 FPS and a maximum of 70 FPS.

*Q: What is the combo's rank in The Technomancer?*

A: The combo ranks 857th out of 2,825 tested combinations.

Q: What is the frame rate at 1080p with Low settings?

A: The average frame rate at 1920x1080 with Low settings is 202 FPS.

Measured FPS Breakdown

The measured FPS data for the AMD Ryzen 5 5600F and AMD Radeon RX 9070 in The Technomancer is as follows:

At 3840x2160 (4K):

• Low settings: 79 FPS average
• Medium settings: 60 FPS average, with a minimum of 51 FPS and a maximum of 70 FPS
• High settings: 52 FPS average
• Ultra settings: 40 FPS average

At 2560x1440 (1440p):

• Low settings: 143 FPS average
• Medium settings: 110 FPS average, with a minimum of 94 FPS and a maximum of 127 FPS
• High settings: 94 FPS average
• Ultra settings: 73 FPS average

At 1920x1080 (1080p):

• Low settings: 202 FPS average
• Medium settings: 169 FPS average, with a minimum of 143 FPS and a maximum of 194 FPS
• High settings: 144 FPS average
• Ultra settings: 112 FPS average

These results show a clear performance hierarchy, with 1080p offering the highest frame rates and 4K the lowest. The Medium settings at each resolution provide the only measurements with min/max FPS data, offering insight into frame pacing. At 1080p Medium, the 51 FPS variance between min and max indicates some inconsistency, but the 169 FPS average is smooth. At 1440p Medium, the variance is 33 FPS, which is tighter, while at 4K Medium, the variance is 19 FPS, showing more stability but at a lower overall frame rate. The data confirms that this combo is best suited for 1440p gaming, where it can deliver high frame rates with good consistency.