The Technomancer

The Technomancer

AVERAGE FPS
96
good

This combination provides smooth gameplay with an average of 96 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 36 46 54 70
1440p QHD 66 84 98 128
1080p Full HD 100 128 150 196

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 70
3840x2160 Medium 54
3840x2160 High 46
3840x2160 Ultra 36
2560x1440 Low 128
2560x1440 Medium 98
2560x1440 High 84
2560x1440 Ultra 66
1920x1080 Low 196
1920x1080 Medium 150
1920x1080 High 128
1920x1080 Ultra 100

The Technomancer with AMD Ryzen 5 5500X3D + AMD Radeon RX 7700 XT, In-Depth Analysis

# The Technomancer with AMD Ryzen 5 5500X3D + AMD Radeon RX 7700 XT

The Technomancer, a 2016 Action RPG, presents an interesting stress test for this AMD pairing. The data shows a system that scales predictably across resolutions, with the Radeon RX 7700 XT shouldering most of the graphical load while the Ryzen 5 5500X3D provides ample headroom. The measured results indicate a configuration that remains fluid at high settings through 1440p, but demands settings adjustments to maintain playability at 4K. The combo ranks 1038 out of 2825 tested combinations, placing it comfortably in the upper half of the database, a position earned through consistent, if not spectacular, performance across the board.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and consistent across all settings, revealing a GPU-bound scenario at higher resolutions. At High settings, the average frame rate falls from 128 FPS at 1920x1080 to 84 FPS at 2560x1440, then to 46 FPS at 3840x2160. That represents a 34% reduction moving from 1080p to 1440p, and a further 45% drop when stepping up to 4K. The pattern is similar at Medium settings: 150 FPS at 1080p, 98 FPS at 1440p, and 54 FPS at 4K. The scaling factor between each resolution step is nearly identical, which points to a consistent limiting factor — the GPU's rendering throughput — rather than any sudden bottleneck appearing at a specific resolution.

The Low settings row tells the same story with higher absolute numbers. At 1920x1080, the system produces 196 FPS average, which drops to 128 FPS at 1440p and 70 FPS at 4K. The percentage deltas are slightly smaller here, with a 35% drop from 1080p to 1440p and a 45% drop from 1440p to 4K. This near-uniform scaling suggests the CPU is not becoming a constraint even at lower graphical loads; if it were, the 1080p-to-1440p gap would widen disproportionately as the CPU struggled to feed frames. Instead, the data shows a smooth, predictable curve that follows pixel count changes almost exactly.

At Ultra settings, the pattern holds but the floor is lower. The system averages 100 FPS at 1080p, 66 FPS at 1440p, and 36 FPS at 4K. The 4K Ultra result is the only measured point below 40 FPS, indicating that this combination reaches its practical limit at 4K with maximum quality. The min FPS data, available only for the Medium preset, reinforces this: at 4K Medium, the minimum is 46 FPS, while at 1440p Medium it is 84 FPS and at 1080p Medium it is 128 FPS. These minimums track the averages closely, suggesting frame pacing remains stable without severe hitches.

The overall picture is that resolution scaling behaves exactly as expected for a mid-to-high-range GPU. The 7700 XT delivers playable frame rates at 1440p across all settings, with Ultra still holding 66 FPS average. At 4K, only Low and Medium settings clear the 60 FPS threshold, with Medium averaging 54 FPS and Low at 70 FPS. The data indicates that users targeting 4K should expect to compromise on quality, while 1440p users can run the game at near-maximum settings without issue.

GPU Role

The AMD Radeon RX 7700 XT is the defining component in this configuration's gaming performance. Built on the RDNA 3.0 architecture with a Navi 32 chip, it carries 12 GB of GDDR6 memory on a 192-bit bus, providing 432.0 GB/s of bandwidth. The GPU's boost clock reaches 2544 MHz, with a game clock rated at 2171 MHz and a base clock of 1435 MHz. These specifications translate into a Passmark G3D score of 22547 and a percentile ranking of 67 among all GPUs, placing it above the median but not in the enthusiast tier.

The VRAM allocation of 12 GB proves sufficient for The Technomancer across all tested settings. The game, released in 2016, does not appear to stress memory capacity even at 4K Ultra, where the average FPS of 36 is limited by compute and shading throughput rather than memory swapping. The 432.0 GB/s bandwidth is also adequate; if memory bandwidth were a bottleneck, the scaling from 1440p to 4K would show a sharper drop than the consistent 45% observed. The data suggests the GPU's 3456 shading units and 96 ROPs are the primary determinants of frame rate at higher resolutions.

The GPU's nearest rivals in the benchmark database provide context for its raw compute position. The RX 7700 XT scores 0.5% higher than the NVIDIA GeForce RTX 5060 Mobile, 0.8% lower than the RTX 4060 Mobile, 1.5% lower than the RTX 2080, and 1.7% higher than the AMD Radeon RX 5700. These are tight margins, indicating the 7700 XT sits in a crowded performance band where small architectural differences matter more than raw specification sheets. In The Technomancer specifically, the measured results show the GPU delivering 84 FPS at 1440p High, which is a strong outcome for a game of this era.

The GPU's FP32 compute of 35.17 TFLOPS and texture rate of 549.5 GTexel/s are theoretical figures that align with the observed performance. The game's visual effects, typical of a 2016 Action RPG, likely rely more on fill rate and pixel throughput than on complex compute shaders. The pixel rate of 244.2 GPixel/s explains why 4K resolutions cause such a significant frame rate drop — the GPU must fill four times the pixels of 1080p, and the ROP count of 96 becomes the limiting factor.

CPU Role

The AMD Ryzen 5 5500X3D provides the processing foundation for this combo, and its influence on The Technomancer's frame rates is minimal but non-zero. This 6-core, 12-thread processor runs at a base clock of 3.00 GHz and boosts to 4.00 GHz, built on the Zen 3 architecture with a 7 nm process. Its defining feature is the 96 MB shared L3 cache, a large pool that helps with game data locality, though its impact on a 2016 title appears modest. The CPU's Passmark multithread score is 20363, with a single-thread score of 2941, and it holds an 85th percentile ranking among all CPUs.

In the measured data, the CPU does not appear to bottleneck the GPU at any resolution. The smooth scaling pattern discussed earlier — where frame rates drop proportionally with pixel count — would break if the CPU struggled to issue draw calls fast enough. At 1080p Low, the system reaches 196 FPS average, which is a high enough frame rate that CPU limitations would typically surface. The fact that it does not, and that the 4K Low result of 70 FPS is exactly proportional, indicates the 5500X3D has ample headroom for this workload.

The CPU's benchmark scores reinforce this interpretation. Its Passmark single-thread score of 2941 is respectable for the 5000 series, and the physics score of 2282 suggests adequate game logic processing. The nearest rivals show how tightly grouped this processor is: the Ryzen 5 5600F scores 0.2% higher, the AMD Ryzen AI 7 PRO 450 scores 0.2% lower, the Intel Core Ultra 5 225 scores 0.2% higher, and the Intel Core i9-12900T scores 0.3% lower. These sub-1% deltas mean the 5500X3D is functionally equivalent to these alternatives in synthetic benchmarks, and its real-world gaming performance in The Technomancer is similarly expected to be indistinguishable from these peers.

The 6-core, 12-thread configuration is more than sufficient for a game from 2016, which was designed around the 4-core/8-thread consoles of that era. The large L3 cache may help with open-world streaming or complex AI routines, but the measurable effect is that frame rates remain stable, as evidenced by the Medium preset min FPS figures. At 4K Medium, the minimum of 46 FPS is only 8 FPS below the 54 FPS average, indicating the CPU maintains consistent frame delivery without stutters. This stability is a hallmark of a processor with headroom to spare.

How This Combo Ranks

The combination of the Ryzen 5 5500X3D and Radeon RX 7700 XT achieves a rank of 1038 out of 2825 tested combos in The Technomancer, placing it in the top 37% of all configurations. This is a solid result for a mid-range pairing, and it reflects the GPU's strong showing at 1440p and the CPU's ability to keep pace. The percentile positions of the individual components — 85th for the CPU and 67th for the GPU — suggest the combo's ranking is dragged down slightly by the GPU, which is the more modest performer of the two.

The rank implies that roughly 1800 other combinations outperform this setup in this specific game. Those would include systems with higher-tier GPUs like the RTX 4080 or RX 7900 XTX, as well as newer architectures that handle modern rendering features more efficiently. However, within the context of the 7700 XT's performance class, the measured FPS figures are consistent with what the GPU's benchmark scores predict. The Passmark G3D score of 22547 correlates with the 84 FPS at 1440p High, which is a reasonable expectation for a GPU in the 67th percentile.

The CPU's high percentile ranking does not boost the combo beyond what the GPU can deliver, confirming that The Technomancer is GPU-bound at typical gaming resolutions. If the game were CPU-limited, the combo's rank would likely be higher, closer to the CPU's 85th percentile. Instead, the rank sits between the two components' individual percentiles, weighted toward the GPU. This is the expected outcome for a graphically intensive title, and it means users considering this combo should focus GPU upgrades before CPU upgrades if they want better performance in this game.

The deltaPct values from the nearest rivals provide additional context. The GPU's 1.7% advantage over the Radeon RX 5700 and 1.5% deficit to the RTX 2080 suggest that swapping to either of those cards would produce nearly identical frame rates in this game. Meanwhile, the CPU's sub-0.3% deltas to its rivals mean the processor choice has virtually no impact on the final ranking. The combo's position is thus almost entirely determined by the GPU's performance tier.

Settings Recommendations

The measured data provides clear guidance on which settings preset delivers the best experience at each resolution. At 1920x1080, all four presets produce playable frame rates, with High at 128 FPS and Ultra at 100 FPS. The gap between High and Ultra is 28 FPS, which is significant enough to warrant a choice based on display refresh rate. For a 144 Hz monitor, High at 128 FPS is the better option, as it fits within the refresh window; for a 60 Hz panel, Ultra at 100 FPS provides visual fidelity without dropping below the threshold.

At 2560x1440, the recommendation shifts to High as the default choice. The High preset averages 84 FPS, which is smooth for most users, while Ultra drops to 66 FPS — still playable but with a 21% performance penalty for marginal visual gains. Medium at 98 FPS is the choice for competitive play or high-refresh displays, offering a 17% boost over High. Low at 128 FPS is excessive for this game's visuals and would only serve to maximize frame rates on a 120 Hz+ monitor.

The 3840x2160 resolution requires the most consideration. Ultra at 36 FPS is below the playability threshold for most users, and should only be used for screenshots or turn-based exploration. High at 46 FPS is borderline, acceptable for slower-paced gameplay but not for combat-heavy sequences. Medium at 54 FPS is the recommended preset for 4K, as it balances visual quality with a frame rate that approaches 60 FPS. Low at 70 FPS is the best choice for a locked 60 FPS experience, though it sacrifices graphical detail.

Across all resolutions, the Medium preset offers the most consistent experience, with min FPS data available to confirm stability. The measured minimums — 128 FPS at 1080p, 84 FPS at 1440p, and 46 FPS at 4K — are all within 15% of their respective averages, indicating no frame-time spikes. For users who prioritize a stable frame rate over maximum fidelity, Medium is the safe recommendation. For those with 1440p displays, High provides the best balance of quality and performance, with 84 FPS average and no reported minimum below 60 FPS.

FAQ

Q: Can this combo run The Technomancer at 4K smoothly?

A: Only at Low or Medium settings. The measured results show 70 FPS average at 4K Low and 54 FPS average at 4K Medium. High settings drop to 46 FPS, and Ultra falls to 36 FPS, both below the 60 FPS threshold for smooth gameplay.

Q: What is the best resolution for this setup?

A: 2560x1440 provides the best balance, with High settings delivering 84 FPS average and Ultra at 66 FPS. At 1080p, all presets exceed 100 FPS, but the visual upgrade to 1440p is significant for this 2016 Action RPG.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the limiting component. Frame rates scale proportionally with resolution, dropping about 45% from 1440p to 4K across all settings. The CPU's single-thread score of 2941 and multithread score of 20363 are sufficient to avoid bottlenecking, as evidenced by the stable minimum frame rates.

Q: How does the RX 7700 XT compare to its nearest rivals in this game?

A: The GPU's Passmark G3D score is 22547, which is 0.5% higher than the RTX 5060 Mobile, 0.8% lower than the RTX 4060 Mobile, 1.5% lower than the RTX 2080, and 1.7% higher than the RX 5700. These margins suggest near-identical performance in The Technomancer.

Q: Should I use the Ultra preset?

A: Only at 1080p or 1440p. At 1080p, Ultra averages 100 FPS, and at 1440p it averages 66 FPS. At 4K, Ultra drops to 36 FPS, which is below acceptable playability for most users. The High preset at 1440p offers a better balance at 84 FPS.

Q: Does the 12 GB VRAM cause any issues?

A: No. The measured results show no indication of memory-related stuttering or performance cliffs. The 432.0 GB/s bandwidth and 12 GB capacity are sufficient for this game, even at 4K Ultra, where the 36 FPS average is limited by compute throughput rather than memory constraints.

Measured FPS Breakdown

The following table presents all measured frame rate data from the FACT PACK, organized by resolution and settings preset.

1920x1080:

  • Low: 196 FPS average
  • Medium: 150 FPS average, 128 FPS minimum, 173 FPS maximum
  • High: 128 FPS average
  • Ultra: 100 FPS average

2560x1440:

  • Low: 128 FPS average
  • Medium: 98 FPS average, 84 FPS minimum, 113 FPS maximum
  • High: 84 FPS average
  • Ultra: 66 FPS average

3840x2160:

  • Low: 70 FPS average
  • Medium: 54 FPS average, 46 FPS minimum, 62 FPS maximum
  • High: 46 FPS average
  • Ultra: 36 FPS average

The Medium preset is the only one with complete min/max data across all resolutions, providing the most detailed view of frame pacing. At 1080p Medium, the spread from minimum to maximum is 45 FPS, indicating variance of about 30% around the average. At 1440p Medium, the spread narrows to 29 FPS, and at 4K Medium it narrows further to 16 FPS. This tightening of frame time variance at higher resolutions is typical of GPU-bound scenarios, where the workload becomes more consistent as the pixel count increases.

The progression from Low to Ultra at each resolution shows a consistent performance penalty per tier. At 1080p, moving from Low to Medium costs 46 FPS, from Medium to High costs 22 FPS, and from High to Ultra costs 28 FPS. At 1440p, the corresponding penalties are 30 FPS, 14 FPS, and 18 FPS. At 4K, they are 16 FPS, 8 FPS, and 10 FPS. The diminishing absolute penalties at higher resolutions align with the GPU becoming the primary bottleneck, as each settings tier has a smaller relative impact on the already-limited pixel throughput.

The data as a whole indicates a configuration that is well-matched for 1440p gaming in The Technomancer, with the GPU providing sufficient headroom for high refresh rates at 1080p and acceptable performance at 4K with reduced settings. The CPU's contribution is stable and unobtrusive, allowing the GPU's performance characteristics to define the experience across all measured configurations.

Hardware Specifications

AMD Ryzen 5 5500X3D

Cores / Threads 6 / 12
Base Clock 3000 MHz
Boost Clock 4000 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 7700 XT

VRAM 12 GB GDDR6
Base Clock —
Boost Clock 2544 MHz MHz
TDP 245 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 5500X3D + AMD Radeon RX 7700 XT in The Technomancer

Resolution Settings Avg FPS
3840x2160 Low 70.0
3840x2160 Medium 54.0
3840x2160 High 46.0
3840x2160 Ultra 36.0
2560x1440 Low 128.0
2560x1440 Medium 98.0
2560x1440 High 84.0
2560x1440 Ultra 66.0
1920x1080 Low 196.0
1920x1080 Medium 150.0
1920x1080 High 128.0
1920x1080 Ultra 100.0

The Technomancer with Ryzen 5 5500X3D + Other GPUs

See how The Technomancer performs with the same CPU but different graphics cards.

The Technomancer with RX 7700 XT + Other CPUs

See how The Technomancer performs with the same GPU but different processors.

Other Games with Ryzen 5 5500X3D + RX 7700 XT

Explore FPS benchmarks for other games using this same hardware combination.