The Medium

The Medium

AVERAGE FPS
38
playable

This combination offers playable performance with an average of 38 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 18 22 31 50
1440p QHD 22 28 40 63
1080p Full HD 27 34 47 75

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 50
3840x2160 Medium 31
3840x2160 High 22
3840x2160 Ultra 18
2560x1440 Low 63
2560x1440 Medium 40
2560x1440 High 28
2560x1440 Ultra 22
1920x1080 Low 75
1920x1080 Medium 47
1920x1080 High 34
1920x1080 Ultra 27

The Medium with AMD Ryzen 5 7500X3D + NVIDIA GeForce GTX 1070, In-Depth Analysis

The Medium is a fixed-camera horror title that leans heavily on atmosphere, and the pairing of an AMD Ryzen 5 7500X3D with an NVIDIA GeForce GTX 1070 produces a playable but constrained experience, particularly at higher resolutions. The data shows a clear pattern: this combination ranks 2400th out of 2911 tested combos for this game, placing it in the lower half of the field, with the GTX 1070’s 8 GB of GDDR5 memory and Pascal architecture acting as the primary bottleneck. Benchmark results indicate that while the CPU has ample headroom, the GPU’s performance ceiling dictates the frame rates you can expect, making settings and resolution choices far more impactful than any processor-side tuning.

FAQ

Q: What is the best resolution for this combo in The Medium?

A: Based on the measured FPS data, 1920x1080 is the only resolution where the combo consistently delivers playable frame rates across all settings. At 1080p Low, the average FPS is 75, and at Medium it drops to 47, while High and Ultra average 34 and 27 respectively. At 2560x1440, only Low settings reach a comfortable 63 FPS average, and at 3840x2160, even Low settings fall to a 50 FPS average, with Medium at 31 FPS.

Q: How does the GTX 1070’s VRAM affect performance in this game?

A: The GTX 1070 has 8 GB of GDDR5 memory with a 256-bit bus and 256.3 GB/s bandwidth. The measured results show that at 3840x2160, the gap between Low and Ultra settings is stark, with average FPS dropping from 50 to 18. This indicates that the VRAM capacity and bandwidth are sufficient for lower settings, but the GPU’s raw compute limits high-detail performance, rather than memory alone being the sole factor.

Q: Is the Ryzen 5 7500X3D a bottleneck for the GTX 1070 in this game?

A: The data does not indicate a CPU bottleneck. The Ryzen 5 7500X3D has 6 cores, 12 threads, and a 96 MB shared L3 cache, with a PassMark single-thread score of 3494 and a multithread score of 25047. Its percentileVsAllCpus is 89, meaning it outperforms most CPUs. In contrast, the GTX 1070 has a percentileVsAllGpus of 47, placing it near the middle of all GPUs. The FPS drops at higher resolutions and settings align with GPU limitations, not CPU constraints.

Q: What is the difference in performance between Low and Ultra settings at 2560x1440?

A: At 2560x1440, the Low preset averages 63 FPS, while the Ultra preset averages 22 FPS. That is a 41 FPS difference, or roughly a 65% reduction in average frame rate when moving from the lowest to the highest settings. Medium sits in between at 40 FPS, and High averages 28 FPS.

Q: Does the Ryzen 5 7500X3D’s high L3 cache help in The Medium?

A: The CPU has a 96 MB shared L3 cache, which is substantial. However, the measured FPS results show a consistent pattern where the GPU’s performance tier determines the outcome. For example, at 1920x1080 Medium, the combo averages 47 FPS, and at 3840x2160 Medium, it averages 31 FPS. The cache likely helps with general processing, but the game’s rendering demands are clearly GPU-bound, as evidenced by the large frame rate swings across settings at the same resolution.

Q: How does this combo compare to other tested combinations in terms of ranking?

A: This specific combo ranks 2400th out of 2911 tested combinations for The Medium. That places it in the 82nd percentile from the bottom, meaning roughly 82% of tested combos perform better. The GTX 1070’s nearest rivals in general benchmarks have average scores within 0.7% of it, such as the AMD FirePro W5000 with a -0.2% delta, so this ranking is consistent with the GPU’s mid-tier status.

GPU Role

The NVIDIA GeForce GTX 1070 is the defining component in this pairing. Its specifications are from the Pascal generation, built on a 16 nm process at TSMC, with a chip designated GP104. The GPU has 1920 shading units, 120 texture mapping units, and 64 ROPs, which are the core building blocks for rasterization. Its base clock is 1506 MHz, with a boost clock of 1683 MHz, and it has a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s. The FP32 performance is 6.463 TFLOPS, which directly relates to how many floating-point calculations the GPU can handle per second for shader work.

Memory is another critical aspect. The GTX 1070 comes with 8 GB of GDDR5 memory on a 256-bit bus, providing 256.3 GB/s of bandwidth. The memory clock is 2002 MHz, translating to 8 Gbps effective. In The Medium, this memory configuration appears sufficient for the lower settings but gets overwhelmed at higher presets. At 3840x2160, the average FPS drops from 50 at Low to 31 at Medium, and then to 22 at High and 18 at Ultra. This steep decline indicates that the GPU’s compute capability, rather than just memory capacity, is the limiting factor, as the game’s higher presets demand more shader work and fill rate.

The GTX 1070’s overall benchmark scores support this. Its PassMark G3D score is 13498, and its average benchmark score is 9780. Its percentileVsAllGpus is 47, meaning it is rated lower than 53% of all GPUs. The nearest rivals in synthetic tests include the AMD FirePro W5000, which has an average score of 9803 and a deltaPct of -0.2%, and the NVIDIA Quadro M2000M, with a score of 9832 and a deltaPct of -0.5%. This shows the GTX 1070 is a solidly mid-range performer, and in a demanding horror title like The Medium, its age shows at higher settings.

The GPU’s DirectX 12 support is rated at 12 (12_1), which is adequate for the game, but the lack of any ray tracing cores or tensor cores (both listed as null) means it cannot offload any advanced lighting or AI work. The result is that the GTX 1070 relies purely on brute force, and the measured FPS reflects that. At 1080p, the maximum average FPS is 75 at Low, which is smooth, but at 1440p, that drops to 63 at Low, and at 4K, it falls to 50 at Low. These numbers are not artifacts of CPU limitation; they are the GPU’s raw output.

How This Combo Ranks

The combo rank for this pairing in The Medium is 2400 out of 2911 tested combinations. This is a low ranking, placing it in the bottom 20% of all tested systems. To put that in perspective, the GTX 1070’s percentileVsAllGpus is 47, which means it is roughly average among all GPUs, but the combination with the Ryzen 5 7500X3D does not boost its standing in this particular game. The ranking suggests that many other CPU-GPU pairings deliver better performance, likely because the GPU is the weak link.

The CPU’s high benchmark scores do not translate into a high combo rank. The Ryzen 5 7500X3D has an average benchmark score of 44573 and a percentileVsAllCpus of 89, placing it in the top 11% of all CPUs. Its nearest rivals in CPU benchmarks are the Intel Core Ultra X9 388H, with an average score of 44466 and a deltaPct of 0.2%, and the Intel Core i9-13950HX, with a score of 44342 and a deltaPct of 0.5%. The CPU is clearly not the issue. The combo rank is dragged down entirely by the GTX 1070’s mid-tier standing.

When looking at the measured FPS data, the ranking makes sense. At 3840x2160, the highest average FPS across any setting is 50 at Low, and the Ultra setting averages only 18 FPS. These are not competitive numbers for a game that requires sustained frame rates for smooth playback. Even at 1920x1080, the best average FPS is 75 at Low, which is playable but not exceptional. The combo sits at a point where it can handle the game at lower fidelity, but it cannot push high-quality visuals without significant compromises. This is consistent with a rank of 2400 out of 2911, where the majority of tested systems have better GPU performance.

The deltaPct values for the GPU’s nearest rivals show how close the GTX 1070 is to other mid-range cards. The AMD FirePro W5000 is 0.2% slower, and the NVIDIA Quadro M2000M is 0.5% slower, while the NVIDIA Tesla M10 is 0.6% faster and the Tesla C2070 is 0.7% faster. These are tiny margins, meaning the GTX 1070 sits in a crowded field of comparable GPUs. In The Medium, that mid-pack performance translates to a combo rank that is firmly below average, as the game’s requirements push the GPU to its limits.

Measured FPS Breakdown

The measured FPS data provides a complete picture of how this combo performs across three resolutions and four settings presets. At 1920x1080, the Low preset delivers an average FPS of 75, which is the highest recorded for this combo in any configuration. The Medium preset averages 47 FPS, with a minimum of 40 and a maximum of 54. High averages 34 FPS, and Ultra drops to 27 FPS. This shows a clear scaling pattern: each step up in settings reduces the average frame rate by roughly 13-14 FPS, with the gap between Low and Medium being the largest at 28 FPS.

Moving to 2560x1440, the performance degrades predictably. Low averages 63 FPS, which is still playable, but Medium drops to 40 FPS, with a minimum of 34 and a maximum of 45. High averages 28 FPS, and Ultra averages 22 FPS. The difference between Low and Ultra at this resolution is 41 FPS, which is a substantial hit. The minimum FPS values for Medium show that the frame pacing can dip below 35 FPS, which may be noticeable in a horror game where smooth camera panning is important.

At 3840x2160, the combo struggles to maintain playable frame rates. Low averages 50 FPS, which is the only setting that comes close to a smooth experience. Medium averages 31 FPS, with a minimum of 26 and a maximum of 36. High drops to 22 FPS, and Ultra averages 18 FPS. These numbers are below the threshold for comfortable gameplay, especially in a game that relies on tension and timing. The minimum FPS of 26 at Medium 4K indicates severe dips that could cause stuttering.

The data shows a consistent pattern: the GTX 1070’s performance scales almost linearly with resolution and settings. At 1080p Low, the combo achieves 75 FPS, but at 4K Ultra, it falls to 18 FPS, a 57 FPS difference. The Medium settings at each resolution provide a middle ground, with 47 FPS at 1080p, 40 FPS at 1440p, and 31 FPS at 4K. The High preset is consistently poor, with averages of 34, 28, and 22 FPS across the three resolutions. This suggests that High settings are not a viable option for this combo, as they offer little visual benefit over Medium while costing significant frame rates.

Settings Recommendations

Given the measured FPS data, the best experience for this combo is to prioritize resolution over settings, with a focus on Medium or Low presets. At 1920x1080, the Medium preset offers an average FPS of 47, with a minimum of 40, which is the sweet spot for a balance between visual quality and smoothness. The Low preset at 1080p averages 75 FPS, which is ideal for players who prioritize frame rate above all else, but Medium provides a more detailed image without dropping below 40 FPS.

For players with a 2560x1440 monitor, the Low preset is the only reasonable choice, as it averages 63 FPS. The Medium preset at 1440p averages 40 FPS, which is borderline for a horror game where motion smoothness matters, but the minimum of 34 FPS could be problematic. The High and Ultra presets at 1440p are not recommended, as they average 28 and 22 FPS respectively, which will feel sluggish.

At 3840x2160, the Low preset is the only option that provides a passable experience, averaging 50 FPS. Medium at 4K averages 31 FPS, which is below the threshold for comfortable play, and High and Ultra are essentially unplayable at 22 and 18 FPS. If you are using a 4K display, the data suggests that you should either lower the resolution to 1440p or stick with the Low preset.

The pattern across all resolutions is that the High preset is never a good choice. At 1080p, High averages 34 FPS, which is worse than Medium’s 47 FPS. At 1440p, High averages 28 FPS, and at 4K, it averages 22 FPS. The Ultra preset is only marginally worse than High, but it offers no benefit in terms of frame rate. Therefore, the recommendation is clear: use Medium at 1080p for the best overall experience, or Low at 1440p if you need higher resolution. Avoid High and Ultra settings entirely, as they do not provide a playable frame rate.

CPU Role

The AMD Ryzen 5 7500X3D is a 7000 series processor based on the Raphael codename, using the Zen 4 architecture on a 5 nm process at TSMC. It has 6 cores and 12 threads, with a base clock of 4.00 GHz and a boost clock of 4.50 GHz. The TDP is 65 watts, which is low for a desktop CPU, and it uses the AMD Socket AM5. The cache configuration includes 64 KB of L1 per core, 1 MB of L2 per core, and a 96 MB shared L3 cache, which is unusually large and a key feature of the X3D branding.

In synthetic benchmarks, the CPU shows strong performance. Its PassMark multithread score is 25047, and its single-thread score is 3494. The integer math score is 70774, floating point math is 43594, and extended instructions score is 20455. The data compression score is 271649, and encryption is 15797. These numbers place the CPU in the 89th percentile of all CPUs, meaning it is faster than most processors on the market. Its average benchmark score is 44573, and its nearest rivals include the Intel Core Ultra X9 388H, which is 0.2% faster, and the Intel Core i5-14600, which is 0.7% faster.

Despite this strong CPU performance, the measured FPS in The Medium shows no indication of a CPU bottleneck. If the CPU were limiting, we would see similar FPS numbers across different settings at the same resolution, because the CPU work would be the constraint. However, the data shows large FPS differences between settings. At 1920x1080, Low averages 75 FPS while Ultra averages 27 FPS. At 2560x1440, Low averages 63 FPS while Ultra averages 22 FPS. This scaling with settings is a classic sign of a GPU-bound scenario, where the CPU has headroom to feed the GPU but the GPU cannot keep up with higher detail levels.

The CPU’s high L3 cache of 96 MB is likely beneficial for games that reuse data, but The Medium’s performance is not cache-limited in this test. The GPU’s 8 GB of VRAM and 256.3 GB/s bandwidth are more relevant, as the game’s textures and effects at higher settings exceed what the GTX 1070 can handle efficiently. The CPU’s 83.2 GB/s memory bandwidth and DDR5 support also do not compensate for the GPU’s limitations.

The launch MSRP for the Ryzen 5 7500X3D is $269, and it was released on 2025-11-11, making it a recent addition to the market. Its production status is Active, and it supports PCIe Gen 5 with 24 lanes (CPU only). It also has integrated graphics, specifically Radeon Graphics, but this is irrelevant when a discrete GPU is installed. The CPU’s performance in The Medium is sufficient; the data shows that the combo’s low rank is entirely attributable to the GTX 1070. If you were to pair this CPU with a stronger GPU, the measured FPS would likely improve significantly, but with the GTX 1070, you are limited to the numbers presented.

Hardware Specifications

AMD Ryzen 5 7500X3D

Cores / Threads 6 / 12
Base Clock 4000 MHz
Boost Clock 4500 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500X3D + NVIDIA GeForce GTX 1070 in The Medium

Resolution Settings Avg FPS
3840x2160 Low 50.0
3840x2160 Medium 31.0
3840x2160 High 22.0
3840x2160 Ultra 18.0
2560x1440 Low 63.0
2560x1440 Medium 40.0
2560x1440 High 28.0
2560x1440 Ultra 22.0
1920x1080 Low 75.0
1920x1080 Medium 47.0
1920x1080 High 34.0
1920x1080 Ultra 27.0

The Medium with GTX 1070 + Other CPUs

See how The Medium performs with the same GPU but different processors.

Other Games with Ryzen 5 7500X3D + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.