The Long Drive
This combination provides smooth gameplay with an average of 117 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 55 | 83 | 102 |
| 1440p QHD | 67 | 95 | 152 | 181 |
| 1080p Full HD | 101 | 142 | 189 | 202 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Long Drive with AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4070, In-Depth Analysis
The Long Drive pairs the AMD Ryzen 5 2600 with the NVIDIA GeForce RTX 4070, a combination that yields a wide spread of frame rates depending on resolution and quality settings. The measured data shows a system that is clearly capable of high refresh rates at 1080p but begins to show its structural limits as pixel count climbs. This analysis breaks down the measured FPS rows, interprets the scaling behavior, and places the combo within the broader database of tested configurations.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The transition from 1920x1080 to 3840x2160 reveals a dramatic and consistent performance drop across all settings. At Low settings, the average frame rate falls from 202.2 FPS at 1080p to 101.8 FPS at 4K, a reduction of roughly half. At Medium, the drop is from 188.7 FPS to 82.5 FPS, again nearly halving. High settings see a decline from 141.5 FPS to 54.6 FPS, and Ultra falls from 100.8 FPS to 40 FPS. This pattern — where 4K performance is consistently about 50-60% of 1080p performance — indicates that the rendering load scales heavily with pixel count, which is expected for a driving simulation with open-world geometry.
The data suggests the RTX 4070 is the dominant factor at 4K, as the frame rates at Ultra (40 FPS) and High (54.6 FPS) are relatively low for a modern GPU, indicating the card is being fully saturated. However, the scaling from 1080p to 1440p is less severe: for example, High settings drop from 141.5 FPS to 94.7 FPS, a 33% decrease. This moderate drop, combined with the fact that 1080p Low (202.2 FPS) does not exceed 1440p Low (180.8 FPS) by a huge margin, implies that at lower resolutions, the Ryzen 5 2600 begins to impose a ceiling. The CPU's 6 cores and 12 threads, with a boost clock of 3.90 GHz, appear sufficient to feed the GPU at 1080p, but the gap between 1080p and 1440p suggests the GPU is still the primary limiter at higher resolutions.
Notably, the jump from 1440p to 4K is the steepest, with High settings falling from 94.7 FPS to 54.6 FPS (a 42% drop). This steepness points to the GPU's memory bandwidth and pixel throughput being the bottleneck, as the RTX 4070's 12 GB of GDDR6X memory and 504.2 GB/s bandwidth are pushed to their limits. The data implies that for 4K gaming, the RTX 4070 is the limiting component, while at 1080p, the CPU's Zen architecture may prevent the GPU from reaching its full potential, though the measured 202.2 FPS at Low is still exceptionally high.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured rows, the Medium preset offers the most balanced experience across all three resolutions. At 1080p, Medium delivers 188.7 FPS, which is only 13.5 FPS lower than Low (202.2 FPS) but provides a significant visual upgrade over Low. The step to High costs 47.2 FPS (down to 141.5 FPS), which is a substantial loss for marginal visual gains in a driving sim where terrain detail matters. At 1440p, Medium achieves 152 FPS, which is comfortably above the 60 FPS threshold and only 28.8 FPS behind Low. High drops to 94.7 FPS, still playable but representing a 38% reduction from Medium.
At 4K, the recommendation shifts. Medium produces 82.5 FPS, which is smooth for most displays, while High drops to 54.6 FPS, which may be acceptable but is below the 60 FPS target for many users. Ultra is not recommended at any resolution: it yields 100.8 FPS at 1080p, 67.2 FPS at 1440p, and 40 FPS at 4K. The drop from High to Ultra at 4K is 14.6 FPS (from 54.6 to 40), a 27% penalty that is hard to justify. The data suggests that Medium is the sweet spot for this combo, offering the best frame rate per quality step, while Ultra should be reserved for users who prioritize visual fidelity over smoothness and are playing at 1080p.
GPU Role — VRAM, clocks, and how they relate to this game's results
The RTX 4070's specifications directly explain the observed performance. With a base clock of 1920 MHz and a boost clock of 2475 MHz, the GPU has a high computational ceiling, reflected in its FP32 throughput of 29.15 TFLOPS. The 12 GB of GDDR6X memory on a 192-bit bus provides 504.2 GB/s of bandwidth, which is ample for 1080p and 1440p but becomes strained at 4K, where the larger frame buffer requirements impact the average FPS. The 46 RT cores and 184 Tensor cores are present, but The Long Drive, being a driving simulation from 2019, likely does not leverage ray tracing heavily, so these units contribute less to the measured scores than raw rasterization.
The GPU's pixel rate of 158.4 GPixel/s and texture rate of 455.4 GTexel/s are key to the 4K performance drop. At 3840x2160, the GPU must fill over 8 million pixels per frame, and the data shows that at Ultra settings, the 40 FPS average indicates the GPU is fully saturated. The 101.8 FPS at 4K Low demonstrates that the GPU can handle the pixel count when shader complexity is low, but the 61.8 FPS drop from Low to Ultra (101.8 to 40) highlights how the settings increase the per-pixel workload. The VRAM capacity of 12 GB is not the bottleneck here, as even at 4K Ultra, the game likely uses less than that, but the bandwidth and pixel fill rate are the limiting factors. The GPU's 81st percentile ranking among all GPUs, with an average benchmark score of 37283, confirms it is a high-end part, but the measured data shows it is not sufficient to maintain 60 FPS at 4K Ultra in this title.
How This Combo Ranks — use comboRankInGame vs other tested combos
In the database of tested combinations, this pairing of the Ryzen 5 2600 and RTX 4070 holds a rank of 589 out of 1734 combos. This places it in the top third of all tested configurations, which is a strong showing given the CPU's age. The CPU itself, the Ryzen 5 2600, has a percentile ranking of 77 against all other CPUs, with an average benchmark score of 19616. Its nearest rivals include the Intel Core i5-1345U (delta of -0.4%) and the AMD Ryzen 5 7530U (delta of 0.6%), indicating the CPU's compute performance is comparable to newer mobile chips, though this does not directly translate to gaming FPS.
The GPU's percentile of 81, with an average score of 37283, is similarly strong. The combo's rank of 589 suggests that other configurations with newer CPUs or higher-end GPUs outperform it, but the data implies that for The Long Drive specifically, the combination is well-balanced. The rank is likely pulled down by the CPU's single-thread performance (Cinebench R23 single-core score of 1579), which can limit minimum frame rates in CPU-bound scenarios. However, the measured FPS at 1080p Medium (188.7 FPS) and 1440p Medium (152 FPS) are high enough that the combo's rank in-game is respectable. Compared to the CPU's nearest rivals, the Ryzen 5 2600 is roughly 0.6% slower than the Ryzen 5 7530U and 0.7% faster than the i7-10700F, which suggests that pairing the RTX 4070 with a slightly faster CPU could yield a better rank, but the current configuration remains viable.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the maximum average FPS achievable with this combo at 1080p?
A: The highest measured average FPS is 202.2, achieved at 1920x1080 with Low settings. Medium settings produce 188.7 FPS, while High and Ultra yield 141.5 and 100.8 FPS respectively.
Q: Can this combo maintain 60 FPS at 4K with Ultra settings?
A: No. The measured average FPS at 3840x2160 with Ultra settings is 40, which is below the 60 FPS target. At High settings, the average rises to 54.6 FPS, and Medium reaches 82.5 FPS.
Q: How does the RTX 4070's memory bandwidth affect 1440p performance?
A: The GPU's 504.2 GB/s bandwidth supports high frame rates at 2560x1440, with Low settings hitting 180.8 FPS and Medium at 152 FPS. The bandwidth is sufficient until 4K, where the higher pixel load reduces performance significantly.
Q: Which settings preset shows the largest FPS drop from 1080p to 4K?
A: Ultra settings show the largest relative drop, falling from 100.8 FPS at 1920x1080 to 40 FPS at 3840x2160, a 60.3% reduction. Low settings drop from 202.2 to 101.8 FPS, a 49.7% reduction.
Q: Is the Ryzen 5 2600 a bottleneck at 1080p Low?
A: The data is inconclusive, but the 202.2 FPS at 1080p Low suggests the CPU can keep up. The difference between 1080p Low (202.2 FPS) and 1440p Low (180.8 FPS) is only 21.4 FPS, indicating the GPU is still the primary limiter, as the CPU's 6 cores and 12 threads are sufficient for this title at lower settings.
Q: How does this combo rank among all tested combinations?
A: It ranks 589 out of 1734 tested combos, placing it in the top 34% of all configurations. This reflects a balanced pairing where the GPU's high performance (81st percentile) compensates for the CPU's lower single-thread score.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the combo delivers its highest frame rates. Low settings average 202.2 FPS, Medium averages 188.7 FPS, High averages 141.5 FPS, and Ultra averages 100.8 FPS. The spread from Low to Ultra is 101.4 FPS, showing that settings have a significant impact at this resolution.
At 2560x1440, performance remains strong but drops noticeably. Low averages 180.8 FPS, Medium averages 152 FPS, High averages 94.7 FPS, and Ultra averages 67.2 FPS. The gap between Low and Ultra narrows to 113.6 FPS, but the drop from High to Ultra is 27.5 FPS, which is steep.
At 3840x2160, the GPU is clearly stressed. Low averages 101.8 FPS, Medium averages 82.5 FPS, High averages 54.6 FPS, and Ultra averages 40 FPS. The Low to Ultra spread is 61.8 FPS, and notably, the difference between High and Ultra is 14.6 FPS, while the difference between Medium and High is 27.9 FPS, indicating that High settings impose a heavy cost at 4K.
Across all resolutions, the pattern is consistent: Low is always the fastest, and Ultra is always the slowest. The data shows that Medium offers the most consistent scaling, with 188.7 FPS at 1080p, 152 FPS at 1440p, and 82.5 FPS at 4K.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 2600 features 6 cores and 12 threads, with a base clock of 3.40 GHz and a boost clock of 3.90 GHz. Its architecture is Zen (Pinnacle Ridge), built on a 12 nm process. For The Long Drive, a driving simulation that likely has moderate CPU demands, the multi-threaded capability (Cinebench R20 multicore score of 4698 and Cinebench R23 multicore score of 11186) is more than adequate. The CPU's single-thread performance, however, is modest, with a Cinebench R23 single-core score of 1579 and a Passmark single-thread score of 2239. This single-thread limitation could explain why the frame rates at 1080p Low (202.2 FPS) do not scale higher, as the game's physics and AI might be bound to a single core.
The CPU's 16 MB of shared L3 cache and 46.9 GB/s memory bandwidth are sufficient for this title, as the game does not appear to be memory-bandwidth sensitive based on the consistent performance across resolutions. The 65 W TDP indicates a power-efficient part, but the data shows that the CPU is not the primary bottleneck above 1080p. At 1440p and 4K, the GPU's workload dominates, and the CPU's role diminishes. The CPU's percentile of 77 and its average benchmark score of 19616 place it in the upper tier of processors, but its nearest rivals, such as the Intel Core i5-1345U and AMD Ryzen 5 7530U, have similar average scores, confirming that the Ryzen 5 2600 is competitive but not exceptional for modern gaming. The measured FPS at 4K High (54.6 FPS) and Ultra (40 FPS) suggests that the CPU is not hindering the GPU at these settings, as the GPU is clearly the limiting factor.
Hardware Specifications
AMD Ryzen 5 2600
NVIDIA GeForce RTX 4070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 2600 + NVIDIA GeForce RTX 4070 in The Long Drive
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 101.8 |
| 3840x2160 | Medium | 82.5 |
| 3840x2160 | High | 54.6 |
| 3840x2160 | Ultra | 40.0 |
| 2560x1440 | Low | 180.8 |
| 2560x1440 | Medium | 152.0 |
| 2560x1440 | High | 94.7 |
| 2560x1440 | Ultra | 67.2 |
| 1920x1080 | Low | 202.2 |
| 1920x1080 | Medium | 188.7 |
| 1920x1080 | High | 141.5 |
| 1920x1080 | Ultra | 100.8 |
The Long Drive with Ryzen 5 2600 + Other GPUs
See how The Long Drive performs with the same CPU but different graphics cards.
The Long Drive with RTX 4070 + Other CPUs
See how The Long Drive performs with the same GPU but different processors.
Other Games with Ryzen 5 2600 + RTX 4070
Explore FPS benchmarks for other games using this same hardware combination.