Steamworld Build

Steamworld Build

AVERAGE FPS
86
good

This combination provides smooth gameplay with an average of 86 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 28 35 51 62
1440p QHD 48 73 95 122
1080p Full HD 75 109 147 191

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 62
3840x2160 Medium 51
3840x2160 High 35
3840x2160 Ultra 28
2560x1440 Low 122
2560x1440 Medium 95
2560x1440 High 73
2560x1440 Ultra 48
1920x1080 Low 191
1920x1080 Medium 147
1920x1080 High 109
1920x1080 Ultra 75

Steamworld Build with Intel Core i5-10400F + AMD Radeon RX 7600, In-Depth Analysis

Steamworld Build, a city builder released in late 2023, exhibits a performance profile on the Intel Core i5-10400F and AMD Radeon RX 7600 combination that is heavily dictated by resolution and preset selection. The benchmark data indicates that while the system is capable of delivering high frame rates at mainstream resolutions, the demands of 4K Ultra settings push it beyond its comfort zone. This analysis examines the measured FPS results to determine the scaling behavior, optimal settings, and the specific roles played by the GPU and CPU.

Resolution Scaling

The measured frame rates show a clear and predictable progression as resolution increases from 1920x1080 to 3840x2160. At the High preset, the system delivers 109 FPS at 1080p. Moving to 1440p reduces this to 72.6 FPS, a 33.4% drop, and then to 35 FPS at 4K, which is a 51.8% reduction from the 1440p figure. This steep decline indicates that the GPU's rendering load is scaling significantly with pixel count, suggesting that at higher resolutions, the AMD Radeon RX 7600 becomes the primary bottleneck.

The scaling pattern across all presets confirms this. For instance, at the Low preset, the frame rate drops from 191 FPS at 1080p to 121.6 FPS at 1440p, and then to 61.9 FPS at 4K. The percentage drop from 1440p to 4K is roughly consistent across Low, Medium, and High presets, hovering around 49-52%. This consistency implies that the resolution scaling is independent of the graphical preset, which is typical for a GPU-bound scenario where the pixel fill rate and memory bandwidth are the limiting factors.

The Ultra preset shows the most dramatic scaling. At 1080p, it achieves 75.1 FPS, but this falls to 48.2 FPS at 1440p and then plummets to 27.8 FPS at 4K. The 4K Ultra result is particularly telling; it is only 36.9% of the 1080p Ultra performance, and the absolute frame rate is below the 30 FPS threshold often considered the minimum for playable, non-action games. The data shows that the transition from 1440p to 4K is the most punishing step, with the GPU's 8 GB memory and 288.0 GB/s bandwidth being heavily taxed by the increased pixel workload.

Settings Recommendations

For a balanced experience at 1080p, the High preset is a strong choice, delivering 109 FPS. This leaves ample headroom for demanding scenes that are common in city builders, where large populations and complex structures can cause frame rate dips. The Medium preset at 147.1 FPS offers an even smoother experience, but High provides a better visual quality per the measured rows without sacrificing the ability to maintain a high refresh rate on most displays.

At 1440p, the High preset remains viable, with 72.6 FPS providing a fluid experience. However, for users targeting a locked 60 FPS with maximum visual fidelity, the Ultra preset falls short at 48.2 FPS. The Medium preset at 94.8 FPS is a more sensible alternative, offering a significant performance boost while still providing a level of detail that is likely superior to Low. The data suggests that Medium is the sweet spot for 1440p, as it comfortably exceeds 60 FPS while maintaining the visual features that justify the resolution increase.

The 4K resolution requires significant compromise. The High preset's 35 FPS is insufficient for a smooth experience, and the Ultra preset's 27.8 FPS is below the playable threshold. The Medium preset at 50.7 FPS is the best option for 4K, as it is the only setting that approaches a playable frame rate while still offering a substantial improvement over the Low preset's 61.9 FPS. The Low preset is the only one that delivers a consistently smooth experience at 4K, but it likely sacrifices too much visual detail for a game that relies on aesthetics. For this resolution, the Medium preset offers the best performance per the measured rows.

GPU Role

The AMD Radeon RX 7600, with its 8 GB of GDDR6 memory on a 128-bit bus, provides a bandwidth of 288.0 GB/s. This memory configuration is a critical factor in the game's performance at high resolutions. The benchmark data shows that the GPU is the performance limiter at 4K, where the frame rates drop dramatically compared to lower resolutions. The card's boost clock of 2655 MHz and game clock of 2250 MHz are high, but they cannot compensate for the memory bandwidth and capacity constraints when rendering at 3840x2160.

The GPU's benchmark scores place it in a specific performance tier. Its Passmark G3D score of 16634 and a percentile of 63 versus all GPUs indicate a mid-range position. Its nearest rivals include the AMD Radeon RX 7600 XT, which is 0.6% ahead, and the NVIDIA GeForce RTX 3070 Mobile, which is 1.3% behind. This tight grouping suggests that the RX 7600's performance in Steamworld Build is representative of its class, with the 8 GB memory being a potential limitation for future titles or for using high-resolution texture packs.

The 165 W TDP and the PCIe 4.0 x8 interface are further characteristics of this GPU. The x8 link could theoretically limit data transfer speeds, though this is unlikely to be a bottleneck in a city builder. The data indicates that the GPU's role is central to the experience; the frame rate scaling with resolution is a direct consequence of its computational and memory capabilities. The 21.75 TFLOPS FP32 performance is sufficient for 1080p and 1440p gaming, but the 4K Ultra results show that the card is not designed for such demanding workloads.

FAQ

Q: What is the best resolution for a smooth 60+ FPS experience with this setup?

A: The data shows that 1920x1080 with the Ultra preset achieves 75.1 FPS, and 2560x1440 with the Medium preset achieves 94.8 FPS. Both options comfortably exceed 60 FPS.

Q: Is the CPU or GPU the limiting factor at 4K resolution?

A: The benchmark results indicate that the GPU is the primary limiting factor at 4K. The frame rates drop significantly from 1440p to 4K across all settings, showing a clear GPU-bound scaling pattern.

Q: Can the system handle 4K Ultra settings?

A: No. The measured 4K Ultra average FPS is 27.8, which is below the generally accepted playable threshold of 30 FPS. The system is not capable of providing a smooth experience at this configuration.

Q: How does the RX 7600 compare to its closest rivals in synthetic benchmarks?

A: The RX 7600's average benchmark score places it within 1.5% of its nearest rivals. It is 0.6% behind the RX 7600 XT and 1.5% behind the Intel Arc B570, while being 1.3% ahead of the RTX 3070 Mobile.

Q: What preset offers the most significant performance jump at 1080p?

A: The data shows a large increase from Ultra to High, going from 75.1 FPS to 109 FPS. The jump from High to Medium is also substantial, reaching 147.1 FPS, but the visual difference may be less noticeable than the performance gain.

Q: Is the 8 GB VRAM sufficient for this game?

A: The data suggests that 8 GB is sufficient for 1080p and 1440p, but it is likely a contributing factor to the poor performance at 4K Ultra, where the memory bandwidth and capacity are heavily taxed.

CPU Role

The Intel Core i5-10400F, a 6-core, 12-thread processor from the Comet Lake architecture, operates with a base clock of 2.90 GHz and a boost clock of 4.30 GHz. In a city builder like Steamworld Build, the CPU is responsible for simulating the game's logic, including citizen pathfinding, resource management, and building placement. The benchmark data suggests that the CPU is not the primary bottleneck in this configuration, as the frame rate scaling is clearly tied to resolution and GPU load.

The CPU's benchmark scores show a solid multi-threaded capability. Its Cinebench R23 multi-core score of 10297 and a Passmark multi-thread score of 12115 indicate that it has enough processing power to handle the complex simulations of a city builder. The 3DMark 16-thread score of 4748 is also respectable. The CPU's percentile of 73 versus all CPUs puts it above the median, and its nearest rivals in terms of average benchmark score are the AMD EPYC 7552 (0.4% ahead) and the Intel Core i5-8500 (1.1% behind), showing it is a competitive mid-range part.

The 12 MB of shared L3 cache and support for DDR4 memory at a bandwidth of 42.7 GB/s are adequate for feeding the GPU. The data indicates that at 1080p with the Low preset, the system reaches 191 FPS, which is a very high frame rate. This high ceiling shows that the CPU can drive the GPU to its limits, and the performance drop at higher resolutions is not due to CPU limitations but rather the GPU's rendering capacity. The CPU's role is to maintain the game's simulation without introducing frame rate inconsistencies, which it appears to do well, as evidenced by the high frame rates at lower resolutions.

Hardware Specifications

Intel Core i5-10400F

Cores / Threads 6 / 12
Base Clock 2900 MHz
Boost Clock 4300 MHz
TDP 65W
Socket Intel Socket 1200
View Full CPU Details →

AMD Radeon RX 7600

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2655 MHz MHz
TDP 165 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-10400F + AMD Radeon RX 7600 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 61.9
3840x2160 Medium 50.7
3840x2160 High 35.0
3840x2160 Ultra 27.8
2560x1440 Low 121.6
2560x1440 Medium 94.8
2560x1440 High 72.6
2560x1440 Ultra 48.2
1920x1080 Low 191.0
1920x1080 Medium 147.1
1920x1080 High 109.0
1920x1080 Ultra 75.1

Steamworld Build with ii5-10400F + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RX 7600 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with ii5-10400F + RX 7600

Explore FPS benchmarks for other games using this same hardware combination.