Steamworld Build
This combination delivers exceptional performance with an average of 158 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 46 | 71 | 91 | 122 |
| 1440p QHD | 91 | 133 | 180 | 231 |
| 1080p Full HD | 144 | 210 | 277 | 304 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with Intel Core i3-12100F + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis
Steamworld Build is a city builder, a genre where the balance between CPU-driven simulation logic and GPU-driven rendering often shifts depending on resolution and settings. The benchmark data for the Intel Core i3-12100F paired with the NVIDIA GeForce RTX 4070 Ti reveals a configuration that is heavily GPU-limited at higher resolutions but becomes increasingly CPU-bound as the resolution drops. This analysis breaks down the measured FPS data to show how the hardware scales, where the bottleneck lies, and how this specific combo ranks against the broader database of tested systems.
Resolution Scaling
The measured FPS data for this combo shows a classic scaling pattern, with average frame rates decreasing as resolution increases. At 1080p with High settings, the combo delivers 210.2 FPS. Moving to 1440p High drops the average to 133.1 FPS, a significant reduction of 77.1 FPS. At 4K High, the average falls further to 71 FPS. This progression from 210.2 to 133.1 to 71 FPS indicates that the GPU is the primary limiting factor at these settings, as the rendering load increases substantially with each step up in pixel count.
The scaling becomes even more pronounced when examining the Low settings data. At 1080p Low, the combo produces 304.3 FPS, which is an exceptionally high frame rate. At 1440p Low, it still manages 230.7 FPS, but at 4K Low, the average drops to 121.9 FPS. The jump from 1440p to 4K at Low settings represents a 108.8 FPS loss, which is a 47% reduction. This steep drop-off at 4K, even with minimal graphical load, suggests that the GPU's raw throughput is being taxed heavily by the sheer number of pixels, while the CPU has enough headroom to feed frames at these rates.
The Ultra settings data provides the clearest evidence of GPU limitation. At 1080p Ultra, the combo achieves 144.1 FPS. At 1440p Ultra, it drops to 91.1 FPS, and at 4K Ultra, it falls to 46.2 FPS. The 4K Ultra result is less than half of the 1080p Ultra score, demonstrating that the RTX 4070 Ti's rendering capabilities are the decisive factor. The data shows a consistent pattern: for every resolution step from 1080p to 1440p to 4K, the FPS drops by roughly 30-40% across all settings. This consistency indicates that the scaling is primarily driven by pixel count and GPU fill rate, not by CPU simulation speed.
The Medium settings data reinforces this interpretation. At 1080p Medium, the combo scores 277.1 FPS, which is higher than the High setting at 1440p (133.1 FPS) and even higher than the 4K High result (71 FPS). This shows that resolution has a more significant impact on performance than graphical preset quality. The gap between 1080p Medium (277.1 FPS) and 4K Medium (91.4 FPS) is 185.7 FPS, highlighting the massive cost of 4K rendering. The data suggests that for this game, a user targeting 60 FPS or higher can comfortably play at 4K High, but Ultra settings at 4K will push the system to its limits, yielding only 46.2 FPS.
CPU Role
The Intel Core i3-12100F is a 4-core, 8-thread processor from the Alder Lake architecture. Its benchmark scores show a strong single-threaded performance profile, which is critical for city builders that often rely on a primary simulation thread. The Cinebench R23 single-core score is 1681, and the Geekbench single-core score is 2224. These numbers indicate that the processor can handle the logical commands of the game efficiently. The multi-threaded scores, such as the Cinebench R23 multi-core score of 11912, are respectable for a quad-core, but the game's performance scaling with resolution suggests that the CPU is not the primary constraint in most tested scenarios.
The fact that FPS drops so dramatically from 1080p to 4K across all settings implies that the CPU is capable of maintaining a high enough frame generation rate to feed the GPU at lower resolutions. At 1080p Low, the system produces 304.3 FPS, which is a very high number for any CPU to sustain. This indicates that the i3-12100F has sufficient headroom to avoid bottlenecking the RTX 4070 Ti at 1080p. However, the data does not show the CPU's limit precisely, as the GPU still appears to be the limiting factor even at 1080p Low, given the 304.3 FPS figure.
The processor's boost clock of 4.30 GHz and base clock of 3.30 GHz are moderate, but its single-thread performance is competitive. In the benchmark database, the i3-12100F holds a percentile rank of 72 among all CPUs, with an average benchmark score of 13516. Its nearest rivals include the AMD Ryzen Threadripper PRO 3975WX, which has an average score of 13534 (a delta of -0.1%), and the Intel Core i7-7700K, with an average score of 13280 (a delta of 1.8%). This places the i3-12100F in a performance tier that is adequate for gaming, but its 4-core/8-thread configuration might struggle in scenarios with many AI units or complex simulation updates, though the measured FPS data does not show evidence of such a bottleneck.
The data indicates that the CPU's role is secondary to the GPU in this specific game and combo. The FPS scaling is almost entirely explained by resolution changes, which is a hallmark of GPU-bound performance. If the CPU were the limiting factor, we would expect to see similar FPS values at 1080p and 1440p, as the CPU's workload would be constant regardless of resolution. Instead, the FPS drops significantly with each resolution increase, confirming that the RTX 4070 Ti's rendering pipeline is the bottleneck.
FAQ
Q: What is the average FPS at 1440p with High settings for this combo?
A: The measured average FPS at 2560x1440 with High settings is 133.1 FPS.
Q: How does the FPS compare between 1080p Ultra and 4K Ultra?
A: At 1080p Ultra, the combo achieves 144.1 FPS, while at 4K Ultra, it drops to 46.2 FPS. This represents a reduction of 97.9 FPS, or roughly 68% less performance.
Q: Is the CPU or GPU the limiting factor at 4K High settings?
A: The data suggests the GPU is the limiting factor. At 4K High, the average FPS is 71, which is much lower than the 133.1 FPS at 1440p High. If the CPU were the bottleneck, the FPS would not drop so sharply with resolution.
Q: What is the best resolution and setting for achieving over 200 FPS?
A: To achieve over 200 FPS, the combo can run at 1080p High (210.2 FPS) or 1440p Low (230.7 FPS). The highest recorded average is 304.3 FPS at 1080p Low.
Q: How does the combo's rank in Steamworld Build compare to other tested combos?
A: The combo ranks 230 out of 1730 tested combinations, placing it in the top 13.3% of all tested systems for this game.
Q: Does the CPU have a high single-thread score that benefits this game?
A: Yes, the Cinebench R23 single-core score is 1681, and the Geekbench single-core score is 2224. These scores indicate strong single-thread performance, which is beneficial for the simulation aspects of a city builder.
How This Combo Ranks
In the overall ranking for Steamworld Build, this specific combination of the Intel Core i3-12100F and NVIDIA GeForce RTX 4070 Ti holds a rank of 230 out of 1730 tested combos. This places it in the 87th percentile of all systems tested, meaning it outperforms the vast majority of other configurations. The rank is determined by the measured FPS data across all resolutions and settings, and the high placement reflects the strong performance of the RTX 4070 Ti, which is the dominant component in this pairing.
The GPU itself has a high average benchmark score of 44900 and ranks in the 85th percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce RTX 5090 Mobile, which has an average score of 45152 (a delta of -0.6%), and the Intel Arc A730M, with an average score of 45592 (a delta of -1.5%). This indicates that the RTX 4070 Ti is a top-tier graphics card, and its performance in Steamworld Build is consistent with its overall benchmark standing.
The CPU's lower rank (72nd percentile) does not hinder the combo's overall performance in this game, as the game appears to be GPU-bound in most tested scenarios. The rank of 230 out of 1730 is a strong result, but it is not at the very top. Combos with more powerful GPUs or CPUs that can push even higher frame rates at 1080p would likely rank higher. The data shows that this combo is well-balanced for high-resolution gaming, but it is not the absolute fastest configuration possible for Steamworld Build.
GPU Role
The NVIDIA GeForce RTX 4070 Ti is the clear performance driver in this combo. With a boost clock of 2610 MHz and 12 GB of GDDR6X memory on a 192-bit bus, it provides a memory bandwidth of 504.2 GB/s. This is a substantial amount of bandwidth, which is crucial for handling high-resolution textures and complex geometry in a city builder with many on-screen elements. The GPU's 7680 shading units and 240 texture mapping units allow for high fill rates, as evidenced by its pixel rate of 208.8 GPixel/s and texture rate of 626.4 GTexel/s.
The GPU's performance in this game is consistent with its benchmark scores. It scores 31624 in the Passmark G3D test and 205028 in the Geekbench OpenCL test, indicating strong compute and rendering capabilities. The measured FPS data shows that the GPU can handle 4K High settings at 71 FPS, which is playable, but 4K Ultra pushes it to 46.2 FPS, which is below the 60 FPS target. The data shows a clear ceiling at 4K Ultra, where the GPU's processing power is maxed out.
The RTX 4070 Ti's role is most evident in the scaling from 1440p to 4K. At 1440p High, it produces 133.1 FPS, but at 4K High, it drops to 71 FPS. This 62.1 FPS drop is directly attributable to the increased pixel count, which requires more shader operations and memory bandwidth. The GPU's 12 GB of VRAM is sufficient for this game, as there is no evidence of memory-related stuttering or performance cliffs in the data. The 21 Gbps effective memory speed is a high-end specification, and it helps maintain the frame rates seen in the 4K High result.
The GPU's performance is also reflected in its overall benchmark percentile of 85, which is higher than the CPU's 72. This confirms that the RTX 4070 Ti is the more capable component in this pairing. For users looking to achieve higher frame rates at 4K Ultra, the data suggests that a more powerful GPU would be needed, as the current configuration is already at its limit in that specific scenario.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce RTX 4070 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 4070 Ti in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 121.9 |
| 3840x2160 | Medium | 91.4 |
| 3840x2160 | High | 71.0 |
| 3840x2160 | Ultra | 46.2 |
| 2560x1440 | Low | 230.7 |
| 2560x1440 | Medium | 179.8 |
| 2560x1440 | High | 133.1 |
| 2560x1440 | Ultra | 91.1 |
| 1920x1080 | Low | 304.3 |
| 1920x1080 | Medium | 277.1 |
| 1920x1080 | High | 210.2 |
| 1920x1080 | Ultra | 144.1 |
Steamworld Build with ii3-12100F + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4070 Ti + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with ii3-12100F + RTX 4070 Ti
Explore FPS benchmarks for other games using this same hardware combination.