Steamworld Build
This combination delivers exceptional performance with an average of 133 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 39 | 57 | 77 | 100 |
| 1440p QHD | 73 | 109 | 145 | 189 |
| 1080p Full HD | 115 | 171 | 228 | 298 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 9 7900X + NVIDIA GeForce RTX 3080, In-Depth Analysis
# Steamworld Build with AMD Ryzen 9 7900X + NVIDIA GeForce RTX 3080
The AMD Ryzen 9 7900X paired with the NVIDIA GeForce RTX 3080 delivers a compelling experience in Steamworld Build, a city builder released in late 2023. With 12 cores and 24 threads from the Zen 4 architecture CPU and 10 GB of GDDR6X memory on the Ampere GPU, this combo sits at rank 1008 out of 3706 tested combinations, placing it comfortably in the upper third of all tested hardware pairings. The measured frame rates across three resolutions and four quality presets reveal a system that can handle the game's demands, though the scaling patterns show distinct bottlenecks depending on the workload.
FAQ
Q: What is the highest average FPS this combo achieves in Steamworld Build?
A: The highest measured average FPS is 298 at 1920x1080 with Low settings. This drops to 115 FPS at the same resolution with Ultra settings, showing the dramatic impact of quality presets on performance.
Q: How does the combo perform at 4K resolution?
A: At 3840x2160, the average FPS ranges from 39 on Ultra to 100 on Low. The Medium preset delivers 77 FPS with a minimum of 65 and maximum of 88, while High settings produce 57 FPS average.
Q: What is the combo's ranking among all tested configurations?
A: The AMD Ryzen 9 7900X and NVIDIA GeForce RTX 3080 combination ranks 1008 out of 3706 tested combos in Steamworld Build. This places it in the top 27% of all tested hardware pairings.
Q: Does the game show better performance at 1440p compared to 1080p with this hardware?
A: No, performance decreases as resolution increases. At 1440p High, the average FPS is 109, compared to 171 at 1080p High. The 4K High preset drops further to 57 FPS average.
Q: What are the minimum FPS values recorded for this combo?
A: The only settings with recorded minimum FPS data are Medium presets: 194 FPS at 1080p, 123 FPS at 1440p, and 65 FPS at 4K. Other presets lack min/max data in the measurements.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 9 7900X has an average benchmark score of 53288, which is 0.2% higher than the AMD EPYC 7313P and 0.6% higher than the Intel Xeon 634. It trails the Intel Core i7-14700F by 0.6% and the Intel Xeon Phi 7290 by 0.3%.
GPU Role
The NVIDIA GeForce RTX 3080 brings 10 GB of GDDR6X memory across a 320-bit bus, delivering 760.3 GB/s of bandwidth. This memory configuration is crucial for Steamworld Build, a city builder that likely loads significant texture data as settlements expand and population grows. The GPU's 8704 shading units and 272 texture mapping units process the game's visual details, while 96 ROPs handle pixel output, resulting in a pixel rate of 164.2 GPixel/s and texture rate of 465.1 GTexel/s.
Clock speeds on the RTX 3080 start at 1440 MHz base and boost to 1710 MHz, with memory running at 1188 MHz (19 Gbps effective). These frequencies, combined with the Ampere architecture's 28.3 billion transistors on an 8 nm Samsung process, produce 29.77 TFLOPS of FP32 performance. The GPU's 68 RT cores and 272 tensor cores are present but likely underutilized in a city builder, where the primary workload involves rendering many objects and managing draw calls rather than ray-traced effects.
The benchmark data shows the RTX 3080's percentile ranking at 68 among all GPUs, with an average benchmark score of 23172. Its nearest rivals include the NVIDIA P106-100 and AMD Radeon Pro Vega 16, both within 0.3-0.4% of its score, which is interesting given the architectural differences. In Steamworld Build specifically, the GPU appears to be the limiting factor at higher resolutions and settings. The jump from 171 FPS at 1080p High to 57 FPS at 4K High suggests that pixel throughput and memory bandwidth become significant constraints as resolution increases. The 10 GB frame buffer may also be a consideration at 4K Ultra, where the average FPS drops to 39.
CPU Role
The AMD Ryzen 9 7900X is a 12-core, 24-thread processor based on the Zen 4 architecture, codenamed Raphael, manufactured on TSMC's 5 nm process. It operates with a base clock of 4.70 GHz and boosts up to 5.60 GHz, with a 170 W TDP. The CPU's cache hierarchy includes 64 KB of L1 per core, 1 MB of L2 per core, and 64 MB of shared L3 cache, which helps with the complex simulation logic inherent to city builders. Memory support is DDR5 with dual-channel configuration, providing 83.2 GB/s of bandwidth.
Synthetic benchmarks show the 7900X's strength in multithreaded workloads: it scores 29300 in Cinebench R23 multicore and 12536 in 3DMark max threads. Single-thread performance is also robust, with a Cinebench R23 single-core score of 2016.5 and a 3DMark single-thread score of 1093. The CPU's percentile ranking of 91 among all CPUs, with an average benchmark score of 53288, places it near the AMD EPYC 7313P, Intel Xeon Phi 7290, Intel Xeon 634, and Intel Core i7-14700F — all within 0.6% of each other.
In Steamworld Build, the CPU's role is likely more pronounced at lower resolutions and settings where the GPU isn't the bottleneck. The data shows 298 FPS at 1080p Low, which suggests the CPU can feed frames rapidly when graphical load is minimal. The 12 cores and 24 threads handle the game's simulation overhead — population management, resource distribution, and building logic — while the high boost clock of 5.60 GHz ensures responsive single-threaded performance for game logic that may not be fully parallelized. The 3DMark scores, particularly the jump from 1093 single-thread to 10972 for 16 threads, indicate strong scaling that benefits the multi-system simulation typical of city builders.
Measured FPS Breakdown
At 1920x1080, the performance envelope spans from 298 FPS on Low to 115 FPS on Ultra. The Medium preset delivers 228 FPS average with a minimum of 194 and maximum of 262, while High settings produce 171 FPS average. These numbers show that even at Ultra, the combo maintains well above 60 FPS, making 1080p a comfortable resolution for this hardware.
Moving to 2560x1440, the averages drop significantly but remain playable: Low hits 189 FPS, Medium achieves 145 FPS with min/max of 123/167, High reaches 109 FPS, and Ultra falls to 73 FPS. The 1440p results show a more pronounced gap between presets, with Ultra less than half of Low's performance, indicating that GPU load increases substantially at this resolution.
At 3840x2160, the performance curve steepens dramatically. Low settings produce 100 FPS average, Medium drops to 77 FPS with min/max of 65/88, High achieves 57 FPS, and Ultra bottoms out at 39 FPS. The 4K results reveal that only Low and Medium settings maintain consistently playable frame rates, with High hovering near the 60 FPS threshold and Ultra falling below it. The Medium preset at 4K shows the tightest min/max range relative to its average, suggesting more consistent frame times than other settings at this resolution.
Resolution Scaling
The jump from 1080p to 1440p shows a predictable performance cost. At High settings, FPS drops from 171 to 109, a 36% reduction. At Low, the drop is from 298 to 189, a 37% decrease. Ultra sees a 37% reduction from 115 to 73 FPS, while Medium drops 36% from 228 to 145. This consistent ~36% reduction across all settings suggests that the scaling is primarily resolution-driven rather than settings-dependent, pointing to the GPU's pixel throughput as the limiting factor.
The transition from 1440p to 4K is steeper. High settings drop from 109 to 57 FPS, a 48% reduction. Low goes from 189 to 100, a 47% decrease. Ultra falls from 73 to 39, a 47% drop, and Medium declines from 145 to 77, a 47% reduction. This worsening scaling efficiency as resolution increases indicates that the RTX 3080's 760.3 GB/s memory bandwidth and 164.2 GPixel/s pixel rate are becoming saturated at 4K. The data suggests that at 1080p, the CPU may be more involved in determining performance, while at 4K, the GPU is clearly the bottleneck.
The overall pattern from 1080p to 4K shows a 66% reduction in FPS at High settings (171 to 57), 66% at Low (298 to 100), 67% at Medium (228 to 77), and 66% at Ultra (115 to 39). This uniformity across settings reinforces that resolution scaling is the dominant factor, with the GPU's capabilities being the primary constraint at higher pixel counts.
Settings Recommendations
For 4K displays, the Medium preset at 77 FPS average is the optimal choice, as it maintains a minimum of 65 FPS and maximum of 88 FPS, providing smooth gameplay without dropping below playable thresholds. High settings at 57 FPS may be acceptable for some players, but the Medium preset offers a safer margin. Ultra at 39 FPS is not recommended for 4K, as it falls below the generally accepted smoothness threshold.
At 1440p, the High preset at 109 FPS offers an excellent balance, with Ultra at 73 FPS also remaining comfortably playable. The Medium preset at 145 FPS provides headroom for demanding scenes, but High appears to be the sweet spot for visual quality without sacrificing performance. Low at 189 FPS is unnecessary unless prioritizing maximum frame rates. For 1080p, all presets are playable, with Ultra at 115 FPS still delivering smooth gameplay. The Medium preset at 228 FPS with minimum of 194 FPS offers the best experience for high-refresh-rate displays, while High at 171 FPS is a strong alternative.
Across all resolutions, the Medium preset shows the most consistent frame pacing when min/max data is considered. At 1080p, the 194-262 FPS range around a 228 average indicates tight variance. At 1440p, the 123-167 FPS range around 145 average shows similar consistency. At 4K, the 65-88 FPS range around 77 average maintains this pattern. This consistency makes Medium the safest recommendation for players who prioritize stable frame times over absolute maximum visual fidelity.
How This Combo Ranks
The AMD Ryzen 9 7900X and NVIDIA GeForce RTX 3080 combination ranks 1008 out of 3706 tested combos in Steamworld Build, placing it in the 72.8th percentile of all tested hardware pairings. This ranking reflects a strong but not top-tier position, consistent with the RTX 3080's 68th percentile among GPUs and the 7900X's 91st percentile among CPUs. The GPU's lower percentile relative to the CPU suggests that the graphics card is the more limiting component in this pairing.
The CPU's benchmark performance, with an average score of 53288, sits within 0.6% of several rivals including the AMD EPYC 7313P, Intel Xeon Phi 7290, Intel Xeon 634, and Intel Core i7-14700F. This tight clustering indicates that the 7900X provides ample processing power that likely exceeds what Steamworld Build requires, meaning the CPU is rarely the bottleneck. Meanwhile, the RTX 3080's average benchmark score of 23172 places it near the NVIDIA P106-100, AMD Radeon Pro Vega 16, AMD Radeon RX 6600M, and AMD Radeon R9 M290X, all within 0.4% — though these rivals are surprisingly close given the architectural and generational differences.
The rank of 1008 out of 3706 suggests that while this combo performs well, there are many other configurations that achieve higher frame rates in Steamworld Build. The data implies that the RTX 3080, despite being an older GPU, still delivers solid performance in this title, but the 10 GB memory capacity and Ampere architecture may not be ideal for the game's highest settings at 4K. Players seeking better performance would need to consider GPUs with higher memory bandwidth and newer architectures, while the CPU's high percentile ranking indicates it can support faster graphics cards without becoming a limiting factor.
Hardware Specifications
AMD Ryzen 9 7900X
NVIDIA GeForce RTX 3080
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 7900X + NVIDIA GeForce RTX 3080 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 100.0 |
| 3840x2160 | Medium | 77.0 |
| 3840x2160 | High | 57.0 |
| 3840x2160 | Ultra | 39.0 |
| 2560x1440 | Low | 189.0 |
| 2560x1440 | Medium | 145.0 |
| 2560x1440 | High | 109.0 |
| 2560x1440 | Ultra | 73.0 |
| 1920x1080 | Low | 298.0 |
| 1920x1080 | Medium | 228.0 |
| 1920x1080 | High | 171.0 |
| 1920x1080 | Ultra | 115.0 |
Steamworld Build with Ryzen 9 7900X + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 3080 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 9 7900X + RTX 3080
Explore FPS benchmarks for other games using this same hardware combination.