Steamworld Build

Steamworld Build

AVERAGE FPS
184
excellent

This combination delivers exceptional performance with an average of 184 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 58 87 116 151
1440p QHD 111 164 219 269
1080p Full HD 174 256 284 313

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 151
3840x2160 Medium 116
3840x2160 High 87
3840x2160 Ultra 58
2560x1440 Low 269
2560x1440 Medium 219
2560x1440 High 164
2560x1440 Ultra 111
1920x1080 Low 313
1920x1080 Medium 284
1920x1080 High 256
1920x1080 Ultra 174

Steamworld Build with AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 5090, In-Depth Analysis

Steamworld Build, a city builder from late 2023, presents an interesting stress profile that differs from typical action titles. The data for this combo, featuring the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 5090, shows a system that is heavily GPU-bound at higher resolutions but reveals the CPU's limitations at 1080p. The following analysis examines the measured frames to determine optimal settings, component roles, and scaling behavior.

Settings Recommendations

The measured FPS data across three resolutions and four quality presets provides a clear picture of the performance envelope. At 4K (3840x2160), the Ultra preset delivers an average of 58 FPS, which is technically playable but sits at the edge of what most users would consider smooth for a management sim where camera panning and map scrolling are constant. The High preset at 4K jumps to 87 FPS, a 50% improvement over Ultra, while Medium reaches 116 FPS. The Low preset at 4K delivers 151 FPS, which is more than sufficient for any display refresh rate currently on the market.

At 1440p (2560x1440), the situation improves dramatically. Ultra averages 111 FPS, High hits 164 FPS, Medium reaches 219 FPS, and Low peaks at 269 FPS. The 1440p Medium preset, with its measured min FPS of 186 and max of 252, offers a balanced experience for high-refresh-rate monitors. At 1080p (1920x1080), all presets exceed 174 FPS, with Low reaching 313 FPS and Medium at 284 FPS. The 1080p Ultra preset's 174 FPS indicates that even the highest quality settings cannot push this combo below the high-refresh threshold at this resolution.

For the best experience, the data suggests prioritizing the Medium preset across all resolutions. At 4K, Medium's 116 FPS average with a min of 98 FPS provides a smooth, consistent frame time that avoids the drops into the 50s seen at Ultra. At 1440p, Medium's 219 FPS average offers headroom for demanding city layouts with thousands of citizens, while the 186 FPS minimum ensures no noticeable stutter during heavy simulation ticks. The High preset is a viable alternative for users who prioritize visual fidelity over frame rate, but the measured data shows that Medium captures most of the visual benefits without the performance penalty.

The Ultra preset is not recommended at any resolution based on this data. At 4K, the 58 FPS average risks dropping into the 40s during complex scenes with dense infrastructure. At 1440p, Ultra's 111 FPS is acceptable but represents a 49% reduction from Medium's 219 FPS for visual gains that are often imperceptible in a game with a top-down camera perspective. The 1080p Ultra setting's 174 FPS is the only case where Ultra remains viable, but the Medium preset's 284 FPS provides a more future-proof experience for larger maps.

GPU Role

The NVIDIA GeForce RTX 5090 is the dominant component in this system, and the benchmark data reflects its capabilities. The GPU's 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is substantial for a city builder that must stream textures for numerous buildings, vehicles, and environmental details simultaneously. The memory clock runs at 1750 MHz with 28 Gbps effective speed, and the GPU's base clock of 2017 MHz boosts to 2407 MHz under load.

The RTX 5090's benchmark scores place it in the 92nd percentile of all GPUs, with an average benchmark score of 79842. Its nearest rivals in the synthetic benchmark suite include the NVIDIA Tesla P100 PCIe 16 GB with a delta of 0.3%, the Tesla P100 PCIe 12 GB at 0.6%, and the AMD Radeon RX 6850M XT at 1.1%. These deltas are minimal, indicating that the RTX 5090's raw compute performance is closely matched by these alternatives, though the 5090's advantage lies in its massive memory pool and bandwidth for real-world gaming scenarios.

In Steamworld Build, the GPU's role becomes evident when examining the FPS scaling from Low to Ultra at each resolution. At 4K, the jump from Low (151 FPS) to Medium (116 FPS) represents a 23% performance cost for the quality increase. The step from Medium to High (87 FPS) costs another 25%, and High to Ultra (58 FPS) costs an additional 33%. This escalating cost curve indicates that the RTX 5090 is being pushed hard by the Ultra preset's additional effects, likely including advanced shadow rendering, ambient occlusion, and particle effects for mining operations and construction.

The GPU's 176 ROPs and 680 TMUs handle the rasterization workload of a city builder efficiently, while the 170 RT cores are largely unused in this genre. The FP32 throughput of 104.8 TFLOPS provides ample compute for the simulation's visual representation, but the data shows that the bottleneck at 4K Ultra is the GPU's ability to process the increased draw calls and texture loads, not the CPU.

FAQ

Q: What is the best settings preset for a 60 Hz 4K display?

A: The Medium preset at 3840x2160 delivers 116 FPS average with a 98 FPS minimum, providing more than enough headroom for a 60 Hz display. The High preset at 87 FPS also works, but Medium offers a 33% performance buffer that helps maintain stability during complex scenes.

Q: How does the Ultra preset compare to High at 1440p?

A: At 2560x1440, High averages 164 FPS while Ultra averages 111 FPS. The difference of 53 FPS represents a 32% reduction in performance for the Ultra preset's additional visual effects, which may not be noticeable in a top-down city builder.

Q: Can this system run Steamworld Build at 240 FPS?

A: Only at 1080p with the Low preset, which averages 313 FPS. The Medium preset at 1080p averages 284 FPS, also exceeding 240 FPS. At 1440p, the Low preset's 269 FPS is the only setting that clears this threshold.

Q: What is the impact of the RTX 5090's 32 GB VRAM on this game?

A: The 32 GB of GDDR7 memory ensures that texture streaming and asset loading never cause hitches, even at 4K Ultra. The bandwidth of 1.79 TB/s allows the GPU to rapidly access the numerous unique building models and environmental textures that a city builder accumulates as the map grows.

Q: Is the 1440p High preset a good choice for a 144 Hz monitor?

A: Yes, the 164 FPS average at 2560x1440 High exceeds the 144 Hz refresh rate, providing smooth motion. The measured data does not include a min FPS for High, but the Medium preset's 186 FPS minimum suggests High should remain above the refresh threshold in most scenarios.

Q: How does the 5800XT handle the game's simulation load?

A: The CPU's 8 cores and 16 threads at up to 4.80 GHz boost clock provide sufficient processing power for the simulation, as evidenced by the high FPS at 1080p. However, the 1080p Ultra preset's 174 FPS versus Medium's 284 FPS indicates that the CPU begins to limit performance at lower resolutions where the GPU is less constrained.

Measured FPS Breakdown

The complete dataset reveals a consistent pattern across resolutions and settings. At 3840x2160, the Low preset averages 151 FPS, Medium averages 116 FPS with a range of 98 to 133 FPS, High averages 87 FPS, and Ultra averages 58 FPS. The 4K results show a clear linear progression where each quality tier costs approximately 30 FPS, with the exception of the High to Ultra jump which costs 29 FPS.

At 2560x1440, the Low preset averages 269 FPS, Medium averages 219 FPS with a range of 186 to 252 FPS, High averages 164 FPS, and Ultra averages 111 FPS. The 1440p data shows a similar pattern to 4K but with higher absolute values, maintaining the same relative differences between presets. The Medium preset's min FPS of 186 is particularly notable, as it confirms that even the lowest framerate during demanding moments remains well above the 144 Hz threshold.

At 1920x1080, the Low preset averages 313 FPS, Medium averages 284 FPS with a range of 242 to 327 FPS, High averages 256 FPS, and Ultra averages 174 FPS. The 1080p results are the most revealing for CPU analysis. The gap between Low (313 FPS) and Medium (284 FPS) is only 29 FPS, and the gap between Medium and High (256 FPS) is 28 FPS, but the jump from High to Ultra (174 FPS) is 82 FPS. This disproportionate drop at 1080p Ultra suggests that the CPU is unable to feed the GPU fast enough at this setting, creating a bottleneck that does not appear at higher resolutions.

How This Combo Ranks

The AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 5090 combination ranks 141st out of 3706 tested combos in Steamworld Build. This places the system in the top 3.8% of all configurations tested, which is an excellent result for a CPU that was released in mid-2024 paired with a flagship GPU from early 2025. The rank reflects the system's ability to maintain high frame rates across all resolutions, though the 1080p Ultra data suggests that the CPU holds the combo back from achieving even higher ranks.

The CPU's individual benchmark performance shows it sits in the 81st percentile of all CPUs, with an average benchmark score of 29879. Its nearest rivals in the synthetic benchmarks are the AMD Ryzen 7 7840H with a delta of 0%, the AMD Ryzen 7 8845HS at -0.3%, and the AMD Ryzen 5 9600X at 0.6%. These tiny deltas indicate that the 5800XT's performance is well-understood and consistent with other mid-range to high-end CPUs.

The GPU's 92nd percentile ranking and average benchmark score of 79842 place it among the top graphics cards tested. The nearest rivals in the GPU benchmarks are the NVIDIA Tesla P100 PCIe 16 GB at 0.3% delta and the AMD Radeon RX 6850M XT at 1.1%, though these are workstation and mobile parts respectively, showing that the RTX 5090's desktop performance is largely unmatched in the database.

CPU Role

The AMD Ryzen 7 5800XT is a Zen 3 architecture processor built on TSMC's 7 nm process, featuring 8 cores and 16 threads. Its base clock of 3.80 GHz boosts to 4.80 GHz, and the 32 MB of shared L3 cache provides fast access to frequently used simulation data. The CPU's memory bandwidth of 51.2 GB/s over a dual-channel DDR4 interface is a potential limitation for a city builder that must track the positions and states of thousands of entities.

The CPU's role in Steamworld Build becomes apparent when comparing the 1080p results. At this resolution, the GPU is less burdened, and the CPU's ability to process the game's simulation logic determines the maximum frame rate. The Low preset's 313 FPS average shows that the CPU can handle the base simulation load, but the Ultra preset's 174 FPS indicates that the additional CPU work required for higher-quality settings—such as more detailed pathfinding, increased entity counts, and more frequent update cycles—creates a bottleneck.

The benchmark data from the CPU shows a single-thread score of 959 in 3DMark and 3359 in Cinebench R23, which are strong results for a 2024 processor. The multi-thread scores of 7683 in 3DMark's max threads test and 23794 in Cinebench R23 multicore indicate that the 8-core design provides ample parallel processing for the game's worker threads. However, the 1080p Ultra result suggests that the game's main simulation thread is the limiting factor, as the CPU's single-thread performance cannot keep up with the GPU's frame generation at this setting.

Resolution Scaling

The FPS data across resolutions reveals how the system's bottleneck shifts from GPU to CPU. At 4K, the GPU is clearly the limiting component, as evidenced by the dramatic FPS differences between presets. The 4K Low to Ultra range spans from 151 FPS to 58 FPS, a 62% reduction that is entirely attributable to GPU workload. At 1440p, the same presets range from 269 FPS to 111 FPS, a 59% reduction, again indicating GPU dominance.

At 1080p, the scaling pattern changes. The Low to Ultra range spans from 313 FPS to 174 FPS, a 44% reduction that is smaller than at higher resolutions. More importantly, the absolute FPS values at 1080p are closer together than the resolution scaling would suggest if the GPU were the sole bottleneck. If the GPU were fully utilized at 1080p, the Low preset should theoretically produce higher frame rates than 313 FPS, given that 1440p Low produces 269 FPS.

The resolution scaling data shows that moving from 1080p to 1440p at the Low preset reduces FPS by 14% (313 to 269), while moving from 1440p to 4K reduces FPS by 44% (269 to 151). The 1080p to 1440p drop is smaller than expected, confirming that the CPU limits performance at 1080p. At the Ultra preset, the scaling is more consistent: 1080p to 1440p drops FPS by 36% (174 to 111), and 1440p to 4K drops FPS by 48% (111 to 58). The Ultra preset's heavier GPU workload masks the CPU bottleneck, allowing the GPU to become the limiting factor even at 1080p.

This analysis indicates that players using this combo should avoid 1080p Ultra settings, as the CPU prevents the RTX 5090 from reaching its full potential. The optimal configuration for this system is 1440p Medium or High, where the GPU and CPU are balanced, or 4K Medium for users prioritizing resolution over frame rate. The data shows that the 5800XT is a capable partner for the RTX 5090 in this game, but its 2024-era single-thread performance becomes the limiting factor when the GPU is not fully utilized.

Hardware Specifications

AMD Ryzen 7 5800XT

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 5090

VRAM 32 GB GDDR7
Base Clock —
Boost Clock 2407 MHz MHz
TDP 575 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800XT + NVIDIA GeForce RTX 5090 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 151.0
3840x2160 Medium 116.0
3840x2160 High 87.0
3840x2160 Ultra 58.0
2560x1440 Low 269.0
2560x1440 Medium 219.0
2560x1440 High 164.0
2560x1440 Ultra 111.0
1920x1080 Low 313.0
1920x1080 Medium 284.0
1920x1080 High 256.0
1920x1080 Ultra 174.0

Steamworld Build with Ryzen 7 5800XT + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 5090 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 7 5800XT + RTX 5090

Explore FPS benchmarks for other games using this same hardware combination.