Steamworld Build

Steamworld Build

AVERAGE FPS
133
excellent

This combination delivers exceptional performance with an average of 133 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 57 77 100
1440p QHD 73 109 145 189
1080p Full HD 115 171 228 298

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 100
3840x2160 Medium 77
3840x2160 High 57
3840x2160 Ultra 39
2560x1440 Low 189
2560x1440 Medium 145
2560x1440 High 109
2560x1440 Ultra 73
1920x1080 Low 298
1920x1080 Medium 228
1920x1080 High 171
1920x1080 Ultra 115

Steamworld Build with AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3080, In-Depth Analysis

Steamworld Build is a city builder that scales heavily with resolution, and the AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3080 combo demonstrates this clearly across the measured presets. The data shows a steep performance drop as pixel count increases, but the pattern is not uniform across all settings, revealing where the bottleneck shifts between the CPU and GPU. At 1080p, the system is largely CPU-limited at lower presets, while at 4K, the GPU becomes the dominant constraint, particularly under Ultra settings where frame rates dip below playable thresholds.

Resolution Scaling

The measured FPS data shows a clear inverse relationship between resolution and performance, but the magnitude of the drop varies significantly by preset. At High settings, the average frame rate falls from 171 FPS at 1920x1080 to 109 FPS at 2560x1440, a reduction of 36%. Moving to 3840x2160, the average drops further to 57 FPS, which is 67% lower than the 1080p result. This steep decline indicates that the RTX 3080's 10 GB GDDR6X memory and 320-bit bus are being increasingly taxed as pixel throughput demands rise.

The Low preset tells a different story. At 1080p, the system achieves 298 FPS, but this falls to 189 FPS at 1440p and 100 FPS at 4K. The percentage drops are 37% and 47% respectively, which is less severe than the High preset's scaling. This suggests that at Low settings, the CPU's single-thread performance becomes the limiting factor at lower resolutions, while the GPU still has headroom. The Ryzen 5 7400F, with a boost clock of 4.70 GHz and a Passmark single-thread score of 3689, appears to cap performance at 1080p, preventing the frame rate from climbing even higher.

Medium settings show the most consistent scaling pattern, with averages of 228 FPS at 1080p, 145 FPS at 1440p, and 77 FPS at 4K. The min FPS values at Medium also provide insight: 194 at 1080p, 123 at 1440p, and 65 at 4K. These minimums indicate that frame pacing remains stable even as resolution increases, though the gap between average and minimum widens slightly at 4K, suggesting occasional GPU workload spikes.

Ultra settings produce the most dramatic scaling. The average FPS plummets from 115 at 1080p to 73 at 1440p (a 37% drop) and then to 39 at 4K (a 66% drop from 1440p and 66% from 1080p). This 39 FPS average at 4K Ultra is below the 60 FPS threshold typically considered smooth for real-time strategy, indicating that the RTX 3080 simply lacks the raw compute power—29.77 TFLOPS FP32—for this combination of resolution and quality. The scaling pattern across all presets confirms that Steamworld Build is a GPU-bound title at higher resolutions, with the CPU's influence waning as pixel count increases.

How This Combo Ranks

Within the benchmark database, this CPU+GPU combination ranks 760th out of 2924 tested combos for Steamworld Build, placing it in the top 26% of all systems. This percentile position reflects a strong but not elite configuration, consistent with the RTX 3080's 68th percentile standing among all GPUs and the Ryzen 5 7400F's 83rd percentile among all CPUs. The combo's rank suggests that while the individual components are above average, they do not represent a top-tier pairing for this specific title.

The ranking is particularly informative when contextualized against the GPU's nearest rivals. The RTX 3080's average benchmark score of 23172 is within 0.4% of the AMD Radeon RX 6600M (23273) and the AMD Radeon R9 M290X (23276), yet those are mobile and older discrete parts respectively. The fact that this desktop GPU ranks only slightly above such varied competitors underscores that raw benchmark scores do not always translate linearly to game performance. However, in Steamworld Build, the combo's 760th rank out of 2924 indicates that the RTX 3080's 10 GB VRAM and 760.3 GB/s bandwidth are sufficient for most presets, but the 4K Ultra result drags the overall standing down.

The CPU's nearest rivals provide additional context for the combo's placement. The Ryzen 5 7400F has an average benchmark score of 32750, which is 0.1% higher than the Intel Core i5-14600T (32707) and 0.2% higher than the Intel Core Ultra 7 155H (32697). These near-identical scores mean that swapping in either Intel part would likely yield similar Steamworld Build performance, all else being equal. The combo rank of 760 thus reflects a balanced mid-to-high-tier system that excels at 1080p and 1440p but struggles to maintain 4K Ultra playability.

CPU Role

The Ryzen 5 7400F is a 6-core, 12-thread processor built on TSMC's 5 nm process with the Zen 4 Raphael architecture. Its base clock of 3.70 GHz and boost clock of 4.70 GHz, combined with a 32 MB shared L3 cache, provide strong single-thread responsiveness that city builders often require for simulation logic. The CPU's Passmark single-thread score of 3689 and Cinebench R23 single-core score of 3072 indicate robust per-core performance, which is critical for Steamworld Build's agent-based simulation and pathfinding calculations.

In this game, the CPU's role is most evident at 1080p with lower presets. At Low settings, the average FPS reaches 298, which is near the practical ceiling for many displays, but the data suggests the CPU is still the limiting factor. The Ryzen 5 7400F's 6 cores and 12 threads are fully utilized for game logic, while the RTX 3080 idles at lower utilization. This is corroborated by the scaling pattern: from Low to Medium at 1080p, the FPS drops from 298 to 228, a 23% reduction that is primarily driven by increased GPU load rather than CPU constraints.

At 4K, the CPU's influence diminishes. The difference between Low and High at 4K is 43 FPS (100 to 57), while at 1080p the same preset gap is 127 FPS (298 to 171). This widening gap at lower resolutions confirms that the CPU is the performance ceiling at 1080p, while the GPU becomes the bottleneck at 4K. The processor's 65 W TDP and DDR5 memory support with 83.2 GB/s bandwidth ensure that memory bandwidth is not a constraint, allowing the CPU to feed the GPU efficiently at all tested resolutions.

Measured FPS Breakdown

The measured data provides a comprehensive view of performance across three resolutions and four quality presets. At 1920x1080, the system delivers an average of 298 FPS on Low, 228 FPS on Medium, 171 FPS on High, and 115 FPS on Ultra. The Medium preset shows the only min/max data at this resolution, with a minimum of 194 FPS and a maximum of 262 FPS, indicating a tight frame time distribution. The jump from High to Ultra at 1080p is substantial—a 56 FPS drop (171 to 115)—suggesting that Ultra enables effects that heavily tax the GPU, such as increased shadow resolution or ambient occlusion.

At 2560x1440, the averages are 189 FPS on Low, 145 FPS on Medium, 109 FPS on High, and 73 FPS on Ultra. The Medium preset again provides min/max figures: 123 FPS minimum and 167 FPS maximum. This 44 FPS spread between min and max is wider than at 1080p, indicating that the GPU is working harder and frame times are less consistent. The Ultra preset at 1440p, at 73 FPS, is still playable but shows a significant 36 FPS drop from High, mirroring the 1080p trend where Ultra imposes a heavy penalty.

At 3840x2160, the averages are 100 FPS on Low, 77 FPS on Medium, 57 FPS on High, and 39 FPS on Ultra. The Medium preset shows a minimum of 65 FPS and a maximum of 88 FPS, which means the average of 77 FPS sits near the middle of that range. The High preset's 57 FPS average is borderline for a city builder, where camera panning and zooming require consistent frame delivery. The Ultra preset's 39 FPS average falls below 40, making it unsuitable for smooth gameplay, especially during late-game scenarios with large populations and complex production chains.

FAQ

Q: What is the best resolution for playing Steamworld Build with this combo?

A: The data suggests 2560x1440 is the sweet spot, as it delivers 109 FPS on High and 145 FPS on Medium, both well above 60 FPS. At 1080p, the CPU limits performance at lower presets, while 4K sacrifices too much frame rate on higher settings.

Q: Can this system handle 4K gaming in Steamworld Build?

A: Yes, but only at lower presets. At 4K, the Low preset achieves 100 FPS and Medium reaches 77 FPS, which are playable. However, High drops to 57 FPS and Ultra falls to 39 FPS, making those presets less ideal for 4K.

Q: How does the Ryzen 5 7400F compare to its nearest rivals in terms of overall benchmark scores?

A: The Ryzen 5 7400F scores 32750 on average, which is 0.1% higher than the Intel Core i5-14600T (32707) and 0.2% higher than the Intel Core Ultra 7 155H (32697). It is also 0.2% lower than the AMD Ryzen 7 PRO 6850H (32812).

Q: Is the RTX 3080 a bottleneck at 1080p in this game?

A: No, the data indicates the CPU is the limiting factor at 1080p, especially at Low and Medium presets where FPS reaches 298 and 228 respectively. The GPU's 29.77 TFLOPS compute power is more than sufficient for 1080p, but the CPU's single-thread performance caps the frame rate.

Q: What is the difference between High and Ultra presets at 1440p?

A: At 2560x1440, High averages 109 FPS while Ultra averages 73 FPS, a difference of 36 FPS. This suggests Ultra enables demanding effects that reduce performance by approximately 33% relative to High.

Q: How does this combo's rank in Steamworld Build compare to its overall percentile standings?

A: The combo ranks 760th out of 2924, placing it in the top 26%. The CPU sits at the 83rd percentile among all CPUs, while the GPU is at the 68th percentile among all GPUs, indicating the pairing is better than average but not exceptional for this title.

Settings Recommendations

For the best balance of visual quality and performance, the Medium preset is the recommended starting point across all resolutions. At 1080p, Medium delivers 228 FPS average with a minimum of 194 FPS, providing ample headroom for any display and ensuring smooth gameplay even during complex simulation moments. At 1440p, Medium's 145 FPS average and 123 FPS minimum keep the experience fluid, while the frame time consistency, as shown by the 167 FPS maximum, prevents stutter during camera movements. At 4K, Medium's 77 FPS average and 65 FPS minimum are the highest preset that maintains a playable frame rate, making it the only high-quality option for 4K displays.

High settings are viable for users prioritizing visual fidelity over raw frame rate, but only at 1080p and 1440p. At 1080p, High achieves 171 FPS, which is still exceptionally smooth, and at 1440p, it maintains 109 FPS. However, at 4K, High drops to 57 FPS, which may cause noticeable judder during rapid scrolling. Ultra settings should be avoided except at 1080p, where the 115 FPS average is acceptable for a city builder, though the 56 FPS drop from High suggests diminishing returns. At 1440p, Ultra's 73 FPS is borderline, and at 4K, the 39 FPS average is too low for consistent playability.

For players with high-refresh-rate monitors at 1080p, the Low preset's 298 FPS average provides maximum responsiveness, but the visual compromise may not be worth it given that Medium offers 228 FPS with presumably better graphics. Ultimately, the data supports Medium as the default choice, with High reserved for those who prefer sharper textures and are willing to sacrifice some frame rate headroom. The Low preset is only recommended for competitive play or if the user prioritizes absolute FPS over visuals.

Hardware Specifications

AMD Ryzen 5 7400F

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4700 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3080

VRAM 10 GB GDDR6X
Base Clock —
Boost Clock 1710 MHz MHz
TDP 320 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7400F + NVIDIA GeForce RTX 3080 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 100.0
3840x2160 Medium 77.0
3840x2160 High 57.0
3840x2160 Ultra 39.0
2560x1440 Low 189.0
2560x1440 Medium 145.0
2560x1440 High 109.0
2560x1440 Ultra 73.0
1920x1080 Low 298.0
1920x1080 Medium 228.0
1920x1080 High 171.0
1920x1080 Ultra 115.0

Steamworld Build with Ryzen 5 7400F + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 3080 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 5 7400F + RTX 3080

Explore FPS benchmarks for other games using this same hardware combination.