Steamworld Build
This combination delivers exceptional performance with an average of 154 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 58 | 87 | 116 | 154 |
| 1440p QHD | 111 | 159 | 177 | 198 |
| 1080p Full HD | 159 | 187 | 209 | 229 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5090, In-Depth Analysis
The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. This 3000-series chip, released in 2019, relies on a 32 MB shared L3 cache and supports DDR4 memory over a dual-channel bus. In Steamworld Build, a city builder where simulation logic and entity updates often scale with thread count, the CPU’s 12 threads provide a solid foundation. Benchmark data shows the processor achieves a Cinebench R23 multi-core score of 15,045 and a single-core score of 2,124, indicating that while its multi-threaded throughput is respectable, its single-thread performance is more modest. This matters because city builders frequently have a primary simulation thread that can bottleneck overall frame pacing.
The CPU’s average benchmark score of 18,129 places it in the 76th percentile of all tested CPUs, with its nearest rival, the Intel Core i5-11400, scoring 18,150, a negligible delta of -0.1%. This suggests the Ryzen 5 3600 is competitive with that Intel part in general compute tasks. However, the data indicates a potential limitation: the CPU’s PassMark multi-thread score is 17,700, while its single-thread score is 2,562. In Steamworld Build, the measured frame rates at lower resolutions show a hard ceiling, which points to the CPU being a primary limiter. Specifically, at 1080p Low settings, the combo achieves 229 FPS, but at 1080p Ultra, it drops to 159 FPS, a reduction that is more attributable to the CPU’s ability to feed the GPU with draw calls and simulation updates than to the GPU itself. The processor’s architecture, with 6 physical cores, is adequate for the game’s threading model, but the relatively modest single-thread score (Cinebench R20 single-core: 892) suggests that in scenarios with heavy simulation load, the CPU will cap performance.
GPU Role
The NVIDIA GeForce RTX 5090 is a 50-series flagship with 32 GB of GDDR7 memory on a 512-bit bus, delivering a memory bandwidth of 1.79 TB/s. Its Blackwell 2.0 architecture, built on a 5 nm process, contains 21,760 shading units and 176 ROPs, with a boost clock of 2407 MHz. This GPU is an extreme performer in synthetic benchmarks, achieving an average score of 84,306, placing it in the 94th percentile of all GPUs. Its nearest rival, the NVIDIA GeForce RTX 5090 D, scores 84,241, a delta of just 0.1%, showing that this card sits at the very top of the performance stack. The GPU’s raw compute capability is immense, with an FP32 throughput of 104.8 TFLOPS, but in Steamworld Build, the data reveals that this power is often underutilized due to CPU constraints.
In this specific game, the RTX 5090’s role is peculiar. At 4K Ultra settings, the combo produces 57.6 FPS, while at 4K Low settings, it jumps to 153.7 FPS. This demonstrates that the GPU is fully capable of rendering the scene at high fidelity, as the frame rate scales massively when the graphical load is reduced. The GPU’s 32 GB of VRAM is far beyond what Steamworld Build requires, as the game is not memory-intensive at these settings. The benchmark results show that the GPU is not the bottleneck at 1080p, where even at Ultra settings (159 FPS), the frame rate is lower than at 1440p High (159.4 FPS), which is counterintuitive unless the CPU is limiting. The RTX 5090’s PassMark G3D score of 39,650 and DirectX 12 score of 185 underscore its dominance, but in a city builder, the GPU’s high polygon throughput and pixel rate (423.6 GPixel/s) are secondary to the CPU’s simulation speed. The data suggests that the GPU is effectively idle-waiting for the CPU at lower resolutions, a classic sign of a processor-bound scenario.
Resolution Scaling
The measured FPS across resolutions and settings reveals a clear pattern of CPU limitation. Moving from 1080p to 4K at High settings, the average FPS drops from 186.5 to 87.3, a reduction of approximately 53%. This scaling is typical of a game that becomes more GPU-bound at higher resolutions, but the absolute numbers at 1080p are telling. At 1080p Low, the combo hits 229 FPS, but at 4K Low, it still manages 153.7 FPS, which is only a 33% drop. This indicates that even at 4K Low, the CPU is not the sole bottleneck, as the GPU is still able to push high frame rates.
However, at 1080p Ultra, the frame rate is 159 FPS, which is nearly identical to the 1440p High result of 159.4 FPS. This plateau is a classic signature of a CPU bottleneck. If the GPU were the limiting factor, the 1080p Ultra frame rate would be significantly higher than the 1440p High frame rate, as the pixel count is much lower. Instead, the data shows that the Ryzen 5 3600 is capping performance around the 160 FPS mark regardless of resolution when the settings are high. The most extreme evidence is the 4K Ultra result of 57.6 FPS, which is a 75% drop from the 4K Low result. This steep decline at 4K Ultra suggests that at this setting, the GPU becomes the primary constraint, as the RTX 5090’s rendering load increases enough to finally outpace the CPU’s frame generation. In summary, the data shows a dual-phase scaling: from 1080p to 1440p, the CPU is the limiter, but at 4K Ultra, the GPU takes over as the dominant constraint.
How This Combo Ranks
In the database of tested combinations, this pairing of AMD Ryzen 5 3600 and NVIDIA GeForce RTX 5090 ranks 281st out of 1,730 combos in Steamworld Build. This places it in the top 16.2% of all tested systems, which is a strong position, but it is not reflective of the GPU’s raw power. The rank suggests that the combo is held back by the CPU, as the RTX 5090 is one of the most powerful GPUs available, yet the overall system performance is not in the top 100. The CPU’s percentile rank of 76th among all CPUs is lower than the GPU’s 94th percentile, indicating a mismatch in capability.
The data implies that this combo behaves more like a mid-range system in this game, despite the presence of a flagship GPU. At 1080p High, the 186.5 FPS result is excellent, but it is not drastically higher than what a less powerful GPU might achieve with the same CPU, as the CPU is the bottleneck. The ranking of 281 out of 1,730 combos means that there are 280 other combinations that perform better, which likely include faster CPUs paired with less powerful GPUs. The measured FPS at 1440p Ultra (110.9 FPS) and 4K High (87.3 FPS) are respectable, but they show that the system is not leveraging the GPU’s full potential. The combo’s rank is a direct consequence of the CPU’s single-thread limitations in a simulation-heavy game, where the GPU is often left partially idle. For users seeking the highest possible frame rates in Steamworld Build, this data indicates that the CPU should be upgraded to fully utilize the RTX 5090.
FAQ
Q: What is the limiting component in this combo at 1080p High settings?
A: The CPU is the limiting component. The measured FPS at 1080p High is 186.5, but at 1440p High it is 159.4, a much smaller drop than expected if the GPU were the bottleneck. The Ryzen 5 3600’s single-thread score (Cinebench R23 single-core: 2,124) suggests it cannot feed the RTX 5090 fast enough at lower resolutions.
Q: How does the RTX 5090 perform compared to its nearest rival in synthetic benchmarks?
A: The RTX 5090’s average benchmark score is 84,306, which is 0.1% higher than the NVIDIA GeForce RTX 5090 D’s score of 84,241. It also leads the AMD Radeon PRO W6600 by 1.3%, whose score is 83,209.
Q: Is the Ryzen 5 3600 a strong match for the RTX 5090 in this game?
A: No, the data shows a mismatch. The CPU ranks in the 76th percentile of all CPUs, while the GPU ranks in the 94th percentile. In Steamworld Build, the CPU’s performance ceiling is evident, as frame rates at 1440p High (159.4 FPS) are nearly identical to 1080p Ultra (159 FPS), indicating the CPU is saturated.
Q: What happens to performance at 4K Ultra settings?
A: At 4K Ultra, the combo achieves 57.6 FPS, which is a significant drop from the 4K Low result of 153.7 FPS. This indicates that at this highest setting, the GPU becomes the primary bottleneck, as its rendering workload increases enough to outpace the CPU’s frame generation.
Q: How does the combo’s overall rank in this game compare to other tested systems?
A: The combo ranks 281st out of 1,730 tested combinations. This top-16% placement is strong, but it is lower than expected given the GPU’s raw power, highlighting the CPU’s limiting effect on overall performance.
Q: What is the CPU’s multi-threaded performance relative to its closest rival?
A: The Ryzen 5 3600 has an average benchmark score of 18,129, which is 0.1% lower than the Intel Core i5-11400’s score of 18,150. In Cinebench R23 multi-core, the AMD chip scores 15,045, showing it is competitive in threaded workloads.
Hardware Specifications
AMD Ryzen 5 3600
NVIDIA GeForce RTX 5090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 5090 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 153.7 |
| 3840x2160 | Medium | 116.4 |
| 3840x2160 | High | 87.3 |
| 3840x2160 | Ultra | 57.6 |
| 2560x1440 | Low | 197.9 |
| 2560x1440 | Medium | 177.3 |
| 2560x1440 | High | 159.4 |
| 2560x1440 | Ultra | 110.9 |
| 1920x1080 | Low | 229.0 |
| 1920x1080 | Medium | 208.9 |
| 1920x1080 | High | 186.5 |
| 1920x1080 | Ultra | 159.0 |
Steamworld Build with Ryzen 5 3600 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5090 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + RTX 5090
Explore FPS benchmarks for other games using this same hardware combination.