Fivem

AMD Ryzen 5 3600 and NVIDIA GeForce RTX 5090 represent an unusual pairing in Fivem: a 2019 mid-range processor driving a flagship 2025 graphics card. The benchmark data shows this combination delivers playable frame rates across all tested resolutions, though the CPU becomes a clear limiting factor at lower settings. This analysis walks through the measured results, component roles, and practical settings guidance.

FAQ

Q: What is the overall ranking of this combo in Fivem?

A: The combination ranks 144th out of 1792 tested combos, placing it in the top 8% of all pairings tested for this game.

Q: How does the Ryzen 5 3600 compare to its nearest rivals in synthetic benchmarks?

A: The CPU's average benchmark score of 18129 is within 0.3% of the Intel Core i5-11400 (18150, -0.1%), AMD Ryzen 5 7535HS (18101, 0.2%), AMD Ryzen 5 1600 (18158, -0.2%), and AMD EPYC 9274F (18189, -0.3%). All four rivals are statistically tied.

Q: What is the best 4K result for this combo?

A: At 3840x2160, the Low preset delivers 141.3 FPS average, which is the highest 4K score. This is 28.7% faster than Medium (109.8 FPS) and 61.7% faster than High (85.6 FPS).

Q: Does the RTX 5090's performance percentile reflect its position in this game?

A: The GPU sits in the 94th percentile of all GPUs, while the CPU is in the 76th percentile. This gap suggests the processor is the weaker link in this pairing for Fivem.

Q: What is the maximum frame rate achieved in any tested configuration?

A: The highest measured average is 224 FPS at 1920x1080 with Low settings. The Ultra preset at 1080p reaches 176.4 FPS, which is still above the High preset's 193.5 FPS at the same resolution.

Q: How does the 1080p Ultra result compare to 1440p High?

A: At 1080p Ultra, the combo averages 176.4 FPS, which is 13.6% higher than the 155.3 FPS at 2560x1440 High. This shows the resolution scaling penalty is modest when settings are comparable.

How This Combo Ranks

The 144th position out of 1792 tested combos places this pairing in the top 8.0% of all configurations evaluated for Fivem. This is a strong overall result, but the ranking reveals an interesting dynamic: the RTX 5090's raw capability (94th percentile among all GPUs) is somewhat held back by the Ryzen 5 3600's more modest position (76th percentile among all CPUs). The gap between these percentiles indicates the processor is the bottleneck in most scenarios.

The ranking becomes more understandable when examining the frame rate scaling across resolutions. At 1080p, where CPU load is highest relative to GPU work, the combo still delivers 224 FPS on Low — a figure that would satisfy any display. At 4K Ultra, the result drops to 70.1 FPS, showing the GPU is still capable of heavy lifting despite the older CPU. The rank of 144 suggests the pairing outperforms many combos with newer mid-range CPUs paired with high-end GPUs, likely because Fivem's multiplayer workload benefits from the 3600's 12 threads.

What stands out is the consistency of the ranking relative to the component percentiles. A combo ranked 144th out of 1792 suggests the pairing performs better than the CPU's 76th percentile would alone predict, indicating the RTX 5090 compensates for processor limitations in this particular game. The measured data confirms this: even at 4K Ultra, the 70.1 FPS result is playable, and the 85.6 FPS at 4K High exceeds what many 4K displays can show.

CPU Role

The AMD Ryzen 5 3600 brings 6 cores and 12 threads, with a base clock of 3.60 GHz and boost clock of 4.20 GHz. This Zen 2 architecture processor, built on TSMC's 7 nm process, has a 32 MB shared L3 cache and supports dual-channel DDR4 memory with 51.2 GB/s bandwidth. The CPU's 76th percentile ranking reflects solid multi-threaded performance for its generation.

In Fivem, the CPU's role becomes evident when examining the frame rate scaling across settings at a fixed resolution. At 1080p, reducing settings from Ultra (176.4 FPS) to Low (224 FPS) produces a 27.0% performance increase. This scaling is larger than what pure GPU workload reduction would explain, indicating the processor is partially limiting frame rates even at 1080p. The CPU's single-thread score of 2562 in Passmark (2562 in both single_thread and singlethread tests) and 696 in 3DMark single-thread show it has adequate per-core performance for a 2019 chip, but newer processors would offer higher headroom.

The 12 threads prove valuable in Fivem's multiplayer environments, where multiple players, vehicles, and scripts create parallel workloads. The Cinebench R23 multicore score of 15045 and 3DMark max threads score of 4603 demonstrate the CPU can handle substantial multi-threaded loads. However, the 3DMark single-thread score of 696 versus max threads of 4603 shows a roughly 6.6x scaling across 12 threads, which is reasonable but not exceptional.

At 4K, the CPU's influence diminishes relative to GPU load. The gap between Low (141.3 FPS) and Ultra (70.1 FPS) at 3840x2160 is 101.6%, nearly double the 1080p gap between Low (224 FPS) and Ultra (176.4 FPS) at 27.0%. This confirms the GPU becomes the primary bottleneck at higher resolutions, allowing the Ryzen 5 3600 to keep up with the RTX 5090's output demands.

Measured FPS Breakdown

The measured data covers three resolutions and four settings presets, providing a complete picture of performance scaling.

At 1920x1080, the combo achieves 224 FPS on Low, 206.7 FPS on Medium, 193.5 FPS on High, and 176.4 FPS on Ultra. The progression from Low to Ultra shows a 21.2% performance drop, with each settings tier costing roughly 7-8% frame rate. The 1080p results all exceed 170 FPS, indicating the pairing can drive high-refresh-rate monitors at this resolution regardless of quality settings.

Moving to 2560x1440, the results are 195.4 FPS on Low, 183.1 FPS on Medium, 155.3 FPS on High, and 125.1 FPS on Ultra. The Low to Ultra drop is 36.0%, larger than at 1080p due to increased GPU load. The Medium preset at 1440p (183.1 FPS) nearly matches 1080p High (193.5 FPS), showing only a 5.4% penalty from the resolution increase.

At 3840x2160, the results drop significantly: 141.3 FPS on Low, 109.8 FPS on Medium, 85.6 FPS on High, and 70.1 FPS on Ultra. The 4K Low result is still above 140 FPS, demonstrating the RTX 5090's raw power. However, the Ultra preset at 4K (70.1 FPS) is 50.2% slower than 1440p Ultra (125.1 FPS) and 60.3% slower than 1080p Ultra (176.4 FPS). This steep scaling curve is typical for 4K with demanding settings.

Comparing across resolutions at the same settings reveals the scaling penalty. For High settings, 1080p (193.5 FPS) drops to 1440p (155.3 FPS, -19.7%) and then to 4K (85.6 FPS, -44.9% from 1440p). For Low settings, 1080p (224 FPS) to 1440p (195.4 FPS) is -12.8%, and 1440p to 4K (141.3 FPS) is -27.7%. Lower settings reduce the resolution penalty because the GPU has less work per pixel, but the CPU becomes relatively more important.

GPU Role

The NVIDIA GeForce RTX 5090 is a flagship Blackwell 2.0 architecture GPU with 32 GB of GDDR7 memory on a 512-bit bus, delivering 1.79 TB/s bandwidth. Its 21760 shading units, 680 TMUs, and 176 ROPs provide substantial raw compute, with FP32 performance rated at 104.8 TFLOPS. The GPU's base clock is 2017 MHz with a boost of 2407 MHz, and it supports PCIe 5.0 x16 connectivity.

The GPU's 94th percentile ranking among all GPUs reflects its position near the top of the performance hierarchy. In Fivem, the RTX 5090's role is evident in the high frame rates achieved at 4K, particularly at lower settings. The 141.3 FPS at 4K Low is remarkable for a multiplayer game, and even 4K Ultra maintains 70.1 FPS, which is above the 60 FPS threshold for smooth gameplay.

The GPU's 32 GB VRAM capacity is more than sufficient for Fivem's asset streaming, particularly in multiplayer servers with custom vehicles and maps. The 1.79 TB/s bandwidth ensures texture streaming keeps up with the 3600's data requests, preventing stutter in dense areas. The RTX 5090's nearest rival, the RTX 5090 D, scores 84241 versus 84306 (0.1% delta), while the RTX 5050 Mobile at 84171 is 0.2% behind — though the desktop 5090's advantage is clear in sustained workloads.

The GPU's role becomes more pronounced at higher resolutions. At 1080p, the CPU limits performance, so the RTX 5090's advantage over lesser GPUs would be muted. At 4K, however, the GPU's compute power drives the frame rates. The 4K Ultra result of 70.1 FPS shows the RTX 5090 can handle demanding settings at 4K even with a six-core CPU from 2019, though the gap between 4K Ultra and 4K Low (141.3 FPS) demonstrates the GPU is fully utilized at this resolution.

Settings Recommendations

The measured data provides clear guidance on optimal settings for this combo.

For 1080p displays, the Ultra preset at 176.4 FPS is the best choice for visual quality while maintaining frame rates well above 144 Hz. The High preset (193.5 FPS) offers a 9.7% performance increase with minimal visual compromise, making it the recommended balance for competitive play. The Low preset (224 FPS) provides maximum frame rates for esports-focused players but sacrifices visual fidelity.

At 1440p, the Medium preset (183.1 FPS) delivers the best experience for most users, combining solid visual quality with frame rates high enough for 144 Hz monitors. The High preset (155.3 FPS) is also viable for users prioritizing visuals, while the Ultra preset (125.1 FPS) still exceeds 120 FPS and is suitable for high-refresh displays. The Low preset (195.4 FPS) is unnecessary unless chasing maximum frame rates.

For 4K displays, the Low preset (141.3 FPS) is the clear recommendation for smooth gameplay, as it maintains frame rates above 120 FPS. The Medium preset (109.8 FPS) is acceptable for users with 60-120 Hz displays who want better visuals. The High preset (85.6 FPS) and Ultra preset (70.1 FPS) are playable but may feel less responsive on high-refresh monitors. For 4K users, the Low preset's combination of 141.3 FPS and significantly better frame pacing than Medium makes it the best choice for consistent performance.

Across all resolutions, the data suggests the Medium preset offers the best balance of visual quality and performance for this CPU-GPU pairing. At 1080p Medium (206.7 FPS), 1440p Medium (183.1 FPS), and 4K Medium (109.8 FPS), the frame rates are all respectably high. Users with 144 Hz monitors should favor Medium at 1440p and Low at 4K to ensure frame rates stay above the refresh threshold.