Rust

The Intel Core i5-13400F paired with the NVIDIA GeForce RTX 3060 Ti ranks in the 885th position out of 1717 tested combinations for Rust, placing it just past the midpoint of the database. This ranking reflects a system that can handle the game at playable levels across most settings, but it is not optimized for maximum visual fidelity at high resolutions. The combination's percentile standing is consistent with a mid-range pairing where the GPU, while capable, becomes the primary constraint in demanding scenarios.

How This Combo Ranks

The combo’s rank of 885 out of 1717 tested configurations indicates a solidly average standing for Rust. This placement is driven by the balance between the CPU and GPU; the i5-13400F is a strong performer, sitting in the 82nd percentile among all CPUs, while the RTX 3060 Ti lands in the 69th percentile among GPUs. The data suggests that in Rust, the GPU’s lower relative standing compared to the CPU prevents the combo from breaking into the upper tiers of performance. Benchmark results show the system is capable of delivering smooth frame rates at 1080p, but as resolution increases, the rank’s implications become clearer: this is a setup built for competitive settings rather than 4K ultra experiences. Relative to other tested combos, the i5-13400F’s average benchmark score of 25236 is nearly identical to its nearest CPU rivals, such as the Intel Core i7-13620H (25201, 0.1% difference) and the AMD Ryzen 5 5600X3D (25365, -0.5% difference), confirming that the CPU is not a bottleneck in this pairing. Instead, the GPU’s performance ceiling dictates the overall outcome, and the rank reflects that reality.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is the defining component in this combo’s Rust performance. Its 8 GB of GDDR6 memory on a 256-bit bus provides a bandwidth of 448.0 GB/s, which is sufficient for the game’s textures and assets at 1080p and 1440p, but becomes a limiting factor at 4K. The GPU’s boost clock of 1665 MHz, combined with 4864 shading units and 152 texture mapping units, drives its raw compute capability of 16.20 TFLOPS. In Rust, the measured FPS data shows how this hardware scales: at 1080p Low, the average FPS is 170.8, but at 4K Ultra, it drops to 30.2. This steep decline is attributable to the GPU’s memory capacity and bandwidth being stretched thin at higher resolutions. The RTX 3060 Ti’s 3DMark Steel Nomad DX12 score of 2626 and PassMark G3D score of 20349 place it in the 69th percentile of all GPUs, with its nearest rivals—such as the AMD Radeon RX 6700M (25180, -0.2% difference) and the AMD Radeon RX 6600 (25235, -0.5% difference)—showing that it is competitive within its class but not exceptional. The data indicates that for Rust, the GPU is the primary driver of performance differences between settings, with the CPU providing consistent support across all resolution tiers.

FAQ

Q: What is the best resolution for this combo in Rust?

A: The data shows 1920x1080 is the optimal resolution, with average FPS ranging from 72.9 at Ultra to 170.8 at Low. At 2560x1440, performance drops to a range of 49.4 at Ultra to 118.4 at Low, while 3840x2160 only reaches 30.2 at Ultra.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i5-13400F has an average benchmark score of 25236, which is 0.1% higher than the Intel Core i7-13620H (25201) and 0.5% higher than the AMD EPYC 9474F (25103). It trails the AMD Ryzen 5 5600X3D (25365) by 0.5%.

Q: Is the RTX 3060 Ti a bottleneck at 4K?

A: Yes, the measured FPS indicates a significant drop at 3840x2160. At High settings, the average is 39 FPS, and at Ultra, it falls to 30.2 FPS, suggesting the GPU’s 8 GB memory and 448.0 GB/s bandwidth are insufficient for smooth 4K gameplay.

Q: What settings should be used for a competitive advantage?

A: For high frame rates, Low settings at 1080p deliver an average of 170.8 FPS, while Medium settings still provide 113 FPS. At 1440p, Low settings yield 118.4 FPS, which is suitable for faster-paced play.

Q: How does the GPU’s performance compare to its nearest rivals?

A: The RTX 3060 Ti’s average benchmark score is 25120, which is 0.2% lower than the AMD Radeon RX 6700M (25180) and 0.5% lower than the AMD Radeon RX 6600 (25235). It is also 0.5% lower than the AMD Radeon 890M (25246).

Q: What is the CPU’s multi-threaded capability?

A: The i5-13400F achieves a Cinebench R23 multicore score of 21279 and a PassMark multithread score of 25032, placing it in the 82nd percentile of all CPUs, which supports strong performance in Rust’s CPU-intensive simulation aspects.

Measured FPS Breakdown

The measured FPS data provides a clear picture of performance across resolutions and settings. At 1920x1080, the combo delivers its best results: Low settings average 170.8 FPS, Medium 113 FPS, High 94.1 FPS, and Ultra 72.9 FPS. Moving to 2560x1440, the averages drop to 118.4 FPS on Low, 76.6 FPS on Medium, 67.2 FPS on High, and 49.4 FPS on Ultra. At 3840x2160, performance becomes marginal: Low yields 69.1 FPS, Medium 45.1 FPS, High 39 FPS, and Ultra 30.2 FPS. These numbers illustrate a consistent scaling pattern where each step up in resolution reduces frame rates by roughly 30-40%, with the gap between Low and Ultra widening as resolution increases. For example, at 1080p, the difference between Low and Ultra is 97.9 FPS, while at 4K, it narrows to 38.9 FPS, indicating that the GPU’s limitations become more pronounced at higher resolutions. The data suggests that for a smooth 60+ FPS experience, 1080p Medium or 1440p Low are the most viable options, while 4K is only playable at Low settings.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals the limiting component. At Low settings, performance falls from 170.8 FPS at 1080p to 118.4 FPS at 1440p (a 30.7% decrease) and then to 69.1 FPS at 4K (a 41.6% further decrease). At Ultra settings, the decline is even more pronounced: from 72.9 FPS at 1080p to 49.4 FPS at 1440p (a 32.2% drop) and then to 30.2 FPS at 4K (a 38.9% drop). This scaling pattern indicates that the RTX 3060 Ti is the primary bottleneck, as the CPU’s performance remains constant regardless of resolution. The i5-13400F’s 10 cores and 16 threads, along with its 20 MB of shared L3 cache, are more than sufficient to feed the GPU at 1080p, but the GPU’s 8 GB memory and 448.0 GB/s bandwidth cannot sustain frame rates as pixel count increases. The data shows that the combo is heavily GPU-limited at 1440p and 4K, with the CPU’s role diminishing as resolution rises. For players targeting high refresh rates, 1080p is the only resolution where the system can consistently exceed 100 FPS across multiple settings.

Settings Recommendations

Based on the measured FPS, the optimal settings depend on the player’s priority. For maximum frame rates, 1080p Low is the clear choice, delivering 170.8 FPS on average, which is ideal for competitive gameplay. Medium settings at 1080p still provide 113 FPS, offering a balance between visual quality and performance. At 1440p, Low settings are recommended for smooth gameplay, averaging 118.4 FPS, while Medium drops to 76.6 FPS, which is acceptable for most players. High settings at 1440p yield 67.2 FPS, which is playable but close to the 60 FPS threshold. For those who prioritize visuals over frame rates, 1080p Ultra at 72.9 FPS is the highest quality option that remains above 60 FPS. At 4K, only Low settings (69.1 FPS) are viable, as Medium (45.1 FPS) and High (39 FPS) fall below playable thresholds. The data suggests that the best overall experience is 1440p Low, as it offers a significant resolution upgrade over 1080p while maintaining high frame rates, or 1080p Medium for a better visual balance without sacrificing smoothness.

CPU Role

The Intel Core i5-13400F plays a supporting but critical role in this combo’s Rust performance. Its 10 cores and 16 threads, based on the Raptor Lake architecture, provide ample processing power for the game’s simulation and server-side calculations. The CPU’s boost clock of 4.60 GHz and 20 MB of shared L3 cache contribute to its single-thread performance, which is essential for Rust’s frame pacing. Benchmark results show the i5-13400F excels in multi-threaded workloads, with a Cinebench R23 multicore score of 21279 and a PassMark multithread score of 25032, placing it in the 82nd percentile of all CPUs. In Rust, this strength ensures that the CPU does not bottleneck the GPU at 1080p, as evidenced by the high frame rates at Low and Medium settings. However, the data also shows that the CPU’s performance advantage becomes less relevant at higher resolutions, where the GPU’s limitations dominate. The CPU’s average benchmark score of 25236 is nearly identical to its nearest rivals, including the Intel Core i7-13620H (25201, 0.1% difference) and the AMD Ryzen 5 5600X3D (25365, -0.5% difference), confirming that it is a well-balanced mid-range choice. For Rust, the i5-13400F provides a stable foundation that allows the RTX 3060 Ti to perform to its potential, making the combo’s overall rank more dependent on graphics settings than CPU capability.