Rust

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for Rust with this AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4060 combination reveals a clear and predictable scaling pattern as resolution increases. At 1080p Low settings, the combo delivers 161.7 FPS, but stepping up to 1440p Low drops that figure to 114.3 FPS, a reduction of roughly 29%. Moving further to 4K Low brings the average down to 66.3 FPS, which is 59% below the 1080p Low result. This pattern strongly indicates that the GPU becomes the dominant limiting factor as pixel count rises, with the CPU’s six Zen 4 cores and 12 threads providing sufficient headroom at lower resolutions.

The scaling at Ultra settings tells a similar story, though the absolute numbers are lower across the board. At 1080p Ultra, the system produces 70.4 FPS; at 1440p Ultra, it falls to 49.3 FPS (a 30% drop); and at 4K Ultra, it bottoms out at 30.7 FPS (a 56% drop from 1080p Ultra). The consistency of these percentage drops—roughly 30% between 1080p and 1440p, and another 40-45% between 1440p and 4K—suggests that the RTX 4060’s 8 GB of GDDR6 memory and 128-bit bus are being saturated as resolution climbs. The 272.0 GB/s memory bandwidth appears to be a significant constraint at 4K, where even Low settings cannot maintain playable frame rates above 66 FPS.

Interestingly, the gap between Low and Ultra settings widens dramatically at higher resolutions. At 1080p, the difference between Low and Ultra is 91.3 FPS (161.7 vs 70.4). At 4K, that gap narrows to 35.6 FPS (66.3 vs 30.7). This compression of the settings range at 4K is a classic sign that the GPU is fully utilized, with the 15.11 TFLOPS of FP32 compute being the bottleneck rather than any CPU limitation. The data implies that players targeting 4K will need to make significant compromises in visual quality, while 1080p users have substantial headroom to max out settings.

Settings Recommendations — which preset gives the best experience per the measured rows

Examining the measured rows, the Medium preset at 1080p delivers 112.4 FPS, which represents a strong balance between visual fidelity and performance. Compared to High at 91.2 FPS, Medium provides a 23% performance uplift while likely retaining most of the game's visual character. The jump from Medium to Low at 1080p yields 161.7 FPS—a 44% improvement over Medium—but the visual cost may be substantial for many players. For competitive play, Low at 1080p is clearly the best option, offering the highest measured frame rate of any configuration in this dataset.

At 1440p, Medium produces 74.8 FPS, which is comfortably above the 60 FPS threshold for smooth gameplay. High at this resolution drops to 66.3 FPS, still playable but with less margin. Ultra at 1440p falls to 49.3 FPS, which may feel less responsive in a survival game where quick reactions matter. The data suggests that 1440p Medium is the sweet spot for this combo, providing a 51% improvement over Ultra while maintaining visual quality above Low.

For 4K, none of the presets achieve a fully smooth experience. Low at 66.3 FPS is the only configuration above 60 FPS, while Medium drops to 42.9 FPS and High to 37.2 FPS. Ultra at 30.7 FPS is borderline unplayable for fast-paced gameplay. The recommendation from the data is clear: 4K users should stick to Low settings, while 1080p and 1440p users can comfortably use Medium or even High depending on their preference for visual quality over frame rate headroom.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 7500F brings six cores and 12 threads based on the Zen 4 architecture, with a base clock of 3.70 GHz and a boost clock of 5.00 GHz. Its 32 MB of shared L3 cache and dual-channel DDR5 memory support with 83.2 GB/s bandwidth position it as a capable mid-range processor for gaming. In benchmark tests, the CPU scores 22,799 in Cinebench R23 multi-core and 3,218 in single-core, placing it in the 82nd percentile of all CPUs. Its nearest rivals include the Intel Core i7-11850H (0.1% higher average score) and the AMD Ryzen 7 2700X (0.3% lower), indicating that the 7500F sits in a tightly contested performance band.

In Rust, the CPU's role appears significant at lower resolutions where the GPU is less burdened. The fact that 1080p Low achieves 161.7 FPS suggests that the six cores are adequately feeding the RTX 4060, but the game likely benefits from the high single-thread performance—evidenced by the 3,218 Cinebench R23 single-core score. The 12 threads handle background tasks and physics calculations, while the 5.00 GHz boost clock ensures responsive frame times in CPU-bound scenarios. However, the data does not show a scenario where the CPU becomes the primary bottleneck, as frame rates continue to scale with GPU load across resolutions.

The 3DMark multi-thread scores—6,376 for 16 threads and 6,379 for max threads—show near-linear scaling, indicating that the CPU's thread management is efficient. This is relevant for Rust's simulation and entity update loops, which can be multi-threaded. The 65 W TDP and 5 nm process node from TSMC also suggest that thermal throttling is unlikely to interfere with sustained performance, allowing the CPU to maintain its boost clock during extended gaming sessions.

How This Combo Ranks — use comboRankInGame vs other tested combos

This particular combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 4060 ranks 945th out of 1,717 tested combos in Rust, placing it in the middle of the pack. This percentile position—roughly the 45th percentile—is somewhat surprising given the individual components' standings. The CPU sits in the 82nd percentile of all CPUs, and the GPU in the 66th percentile of all GPUs, so one might expect a higher overall ranking. However, Rust appears to be a demanding title that exposes the RTX 4060's 8 GB VRAM and 128-bit memory bus as limiting factors, especially at higher resolutions and settings.

The rank of 945 out of 1,717 implies that a majority of tested combinations outperform this setup in Rust, despite the components' respectable individual benchmark scores. This suggests that Rust favors configurations with more VRAM or higher memory bandwidth, areas where the RTX 4060 is comparatively weak. The combo's dataIsMeasured field confirms that these are actual test results, not estimates, adding weight to the ranking. Players seeking higher performance in Rust might look toward combinations with GPUs that have larger memory pools or wider buses, though the exact alternatives are not detailed in this dataset.

The mid-pack ranking also indicates that this combo is not a top-tier choice for Rust specifically, even though it may excel in other games. The gap between the 82nd percentile CPU and the 66th percentile GPU suggests that the GPU is the weaker link in this pairing for Rust's workload. The measured FPS data supports this interpretation, with the system struggling to maintain high frame rates at 4K regardless of settings.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture with a 5 nm process from TSMC, featuring 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth. Its boost clock of 2460 MHz and 15.11 TFLOPS of FP32 compute provide solid raw performance, but the memory subsystem appears to be the constraining factor in Rust. The 8 GB VRAM capacity is likely insufficient for high-resolution textures and complex scenes at 4K, explaining why Ultra settings at that resolution only achieve 30.7 FPS.

The GPU's 24 RT cores and 96 tensor cores are present but unlikely to be heavily utilized in Rust, which is not a ray tracing-focused title. The 48 ROPs and 96 TMUs deliver a pixel rate of 118.1 GPixel/s and texture rate of 236.2 GTexel/s, which should handle most rasterization tasks efficiently. However, the 128-bit memory bus and 272.0 GB/s bandwidth are modest by current standards, and the data suggests this becomes a bottleneck as resolution increases. The passmark G3D score of 19,545 and 66th percentile ranking among GPUs place it below many competitors, though it sits close to rivals like the AMD Radeon RX 6600M (-0.6% delta) and Intel Arc B580 (+0.7% delta).

The GPU's 115 W TDP and suggested 300 W PSU indicate an efficient design, but efficiency does not compensate for the memory limitations in Rust. The fact that 4K Low (66.3 FPS) outperforms 1440p Ultra (49.3 FPS) highlights how settings and resolution interact with the memory subsystem. The GPU's 17 Gbps effective memory speed and 2125 MHz memory clock are respectable, but the narrow bus width limits total bandwidth. This combination of factors makes the RTX 4060 a capable 1080p card that struggles at higher resolutions in memory-intensive titles like Rust.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the combo delivers its strongest performance across all presets. Low settings produce the highest average of 161.7 FPS, followed by Medium at 112.4 FPS, High at 91.2 FPS, and Ultra at 70.4 FPS. The spread of 91.3 FPS between Low and Ultra shows significant headroom for players to adjust visual quality without falling below playable thresholds—even Ultra maintains a respectable 70.4 FPS.

At 2560x1440, the performance drops are noticeable but manageable. Low settings yield 114.3 FPS, Medium drops to 74.8 FPS, High to 66.3 FPS, and Ultra to 49.3 FPS. The gap between Low and Ultra narrows to 65 FPS, and the 1440p Ultra result falls below the 60 FPS threshold, indicating that this preset is not ideal for smooth gameplay at this resolution.

At 3840x2160, the system struggles to maintain high frame rates. Low settings produce 66.3 FPS, which is the only preset above 60 FPS at 4K. Medium drops to 42.9 FPS, High to 37.2 FPS, and Ultra to 30.7 FPS. The gap between Low and Ultra compresses to 35.6 FPS, and all presets except Low are below the 60 FPS threshold. The 4K data clearly shows that this combo is not suited for high-fidelity 4K gaming in Rust, with even Low settings providing only marginal playability.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best measured frame rate for this combo in Rust, and at which settings?

A: The highest measured average FPS is 161.7, achieved at 1920x1080 with Low settings. This is significantly above the next best configuration, which is 1440p Low at 114.3 FPS.

Q: Can this system handle 4K gaming in Rust?

A: At 4K, only Low settings achieve a playable 66.3 FPS average. Medium drops to 42.9 FPS, High to 37.2 FPS, and Ultra to 30.7 FPS, all below the 60 FPS threshold for smooth gameplay.

Q: How does the RTX 4060's memory configuration affect performance?

A: The GPU has 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth. The measured data shows significant frame rate drops at higher resolutions, suggesting that this memory configuration is a limiting factor in Rust.

Q: What is the combo's ranking among all tested systems in Rust?

A: This combo ranks 945th out of 1,717 tested combinations, placing it in the middle of the pack. This is lower than the individual components' percentiles would suggest, indicating Rust is demanding on the GPU's memory subsystem.

Q: How does the Ryzen 5 7500F's CPU performance compare to its nearest rivals?

A: The CPU has an average benchmark score of 24,993, which is 0.1% higher than the Intel Core i7-11850H and 0.3% lower than the AMD Ryzen 7 2700X. It sits in the 82nd percentile of all CPUs.

Q: What settings are recommended for 1440p gaming?

A: Based on the measured data, Medium settings at 1440p provide 74.8 FPS, which is above the 60 FPS threshold. High yields 66.3 FPS, while Ultra drops to 49.3 FPS, making Medium the best balance for smooth gameplay at this resolution.