Rust

Rust, with its demanding survival simulation and large player-built worlds, presents a unique challenge for hardware. For the combination of the AMD Ryzen 5 5600GT and the NVIDIA GeForce RTX 5070 Ti, the measured data across resolutions and presets reveals a system capable of high frame rates, but with distinct bottlenecks that shift depending on the settings chosen. This analysis breaks down the measured FPS to identify the optimal configuration and the role each component plays.

Settings Recommendations

The measured FPS rows show a clear trade-off between visual fidelity and frame rate. At 1920x1080, the Ultra preset delivers an average of 117 FPS, which is playable but leaves performance on the table. The High preset at the same resolution yields 154 FPS, a substantial 31.6% improvement over Ultra. However, the most compelling option at 1080p is the Medium preset, which produces an average of 169 FPS. This is only 9.7% faster than High, but it is the highest average FPS recorded at this resolution below the Low preset, and it does so with a minimum FPS of 143, indicating strong frame pacing. The Low preset at 1080p reaches 196 FPS, but the visual compromise is significant.

Moving to 2560x1440, the pattern shifts. The Ultra preset drops to 80 FPS, which is smooth but not ideal for competitive play. High at this resolution provides 106 FPS, a 32.5% increase over Ultra. The Medium preset offers 125 FPS, which is 17.9% above High and is the best balance of visual quality and speed at this resolution. While Low at 1440p achieves 173 FPS, the Medium preset’s 125 FPS average with a 106 FPS minimum is the recommended choice for a high-refresh-rate experience without the harsh visual downgrade of Low.

At 3840x2160, the data suggests that the Ultra preset is not viable, as it averages only 47 FPS. The High preset at 62 FPS is borderline, but the Medium preset provides a more stable experience with an average of 74 FPS and a minimum of 63 FPS. This is the recommended starting point for 4K gaming, as it is the only preset at this resolution where the minimum FPS stays above 60. The Low preset at 4K reaches 110 FPS, indicating that the GPU is capable of high frame rates at this resolution when the load is reduced, but the visual quality is severely compromised. The data indicates that for this combo, the Medium preset offers the best experience across all resolutions, providing a consistent frame rate that is significantly higher than High or Ultra while maintaining a reasonable visual baseline.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the clear driver of performance in this pairing. Its specifications from the FACT PACK include 16 GB of GDDR7 memory on a 256-bit bus, providing a bandwidth of 896.0 GB/s. This is a substantial amount of memory bandwidth, which is crucial for Rust’s large textures and draw distances. The GPU’s core configuration includes 8960 shading units and 280 TMUs, with a boost clock of 2452 MHz. This hardware is designed for high-throughput rendering, which is reflected in its benchmark scores, such as a Passmark G3D score of 32974 and a 3DMark Steel Nomad score of 6604.

The GPU's percentile ranking of 86 versus all GPUs places it in the top tier of available hardware. Its nearest rivals, according to the data, are the AMD Radeon RX 6900 XT (with a delta of -2%) and the AMD Radeon RX 6800 XT (with a delta of 3.1%), indicating that the RTX 5070 Ti is performing in line with these previous-generation flagship cards. The data shows that at 1080p and 1440p, the GPU is not the primary limiting factor, as the frame rates are high. However, at 4K, the GPU’s workload increases significantly. The fact that the Low preset at 4K achieves 110 FPS while the Ultra preset only achieves 47 FPS shows the GPU’s raw power is being constrained by the complexity of the Ultra settings. The 16 GB VRAM capacity is likely sufficient for Rust's demands, but the data does not specify VRAM usage. The GPU's role is to provide the raw fill rate and memory bandwidth necessary to push high pixel counts, and it does so effectively, as evidenced by the 4K Medium result of 74 FPS.

Resolution Scaling

The FPS scaling from 1920x1080 to 3840x2160 is non-linear and reveals where the bottleneck lies. At the High preset, the average FPS drops from 154 at 1080p to 106 at 1440p (a 31.2% decrease), and then further to 62 at 4K (a 41.5% decrease from 1440p). This steep decline indicates that as the pixel count increases, the GPU becomes more heavily loaded. The RTX 5070 Ti is a powerful card, but the transition from 1440p to 4K at High settings nearly halves the frame rate, suggesting that the GPU's shading units and memory bandwidth are being taxed heavily by the higher resolution.

For the Medium preset, the scaling is more moderate. From 1080p (169 FPS) to 1440p (125 FPS), there is a 26.0% drop. From 1440p to 4K (74 FPS), the drop is 40.8%. This suggests that at Medium settings, the game is better able to utilize the GPU’s resources, and the performance hit from resolution scaling is more predictable. The Low preset shows a different trend: 196 FPS at 1080p, 173 FPS at 1440p (an 11.7% drop), and 110 FPS at 4K (a 36.4% drop from 1440p). The relatively small drop from 1080p to 1440p at Low settings suggests that at these lower settings, the CPU or other system components may be starting to limit performance at 1080p, preventing the GPU from reaching even higher frame rates. The data implies that at 1080p Low, the system is not purely GPU-bound, as the GPU is capable of more than 196 FPS in this scenario. The overall pattern shows that the RTX 5070 Ti is the dominant factor at 4K, while at lower resolutions, the CPU's influence becomes more apparent, particularly with less demanding presets.

How This Combo Ranks

The combined performance of the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5070 Ti in Rust places this combo at rank 501 out of 3723 tested combinations. This puts it in the top 13.5% of all tested systems, which is a strong result. The ranking reflects that this pairing is well-suited for high-performance gaming. The CPU's percentile rank is 74, and the GPU's percentile rank is 86, indicating that the GPU is the stronger component in this pairing. The combo rank of 501 suggests that while the GPU is high-end, the CPU is holding the system back from reaching the very top echelons of the ranking, where combinations with more powerful processors would reside. The data indicates that this is a capable combination that will provide a smooth experience in most scenarios, but it is not the absolute fastest pairing possible. The 501st rank out of 3723 combos confirms the GPU’s strength, but it also highlights that the Ryzen 5 5600GT, while competent, is not in the same performance class as the graphics card.

FAQ

Q: What is the highest average frame rate achievable with this combo at 1080p?

A: The highest average FPS recorded at 1920x1080 is 196 FPS, which is achieved with the Low preset. The Medium preset follows with 169 FPS, and High yields 154 FPS.

Q: Is the Ultra preset playable at 4K resolution with this hardware?

A: No. At 3840x2160 with the Ultra preset, the combo produces an average of only 47 FPS, which is below the threshold for smooth, playable performance. The Medium preset is the recommended choice for 4K, offering 74 FPS.

Q: How does the CPU compare to its nearest rival in terms of average benchmark score?

A: The AMD Ryzen 5 5600GT has an average benchmark score of 20733. Its nearest rival, the Intel Core i5-12490F, has an average score of 20802, which is a delta of -0.3%. This means the 5600GT is essentially on par with the i5-12490F, being only 0.3% slower.

Q: What is the GPU's percentile ranking among all tested GPUs?

A: The NVIDIA GeForce RTX 5070 Ti has a percentile rank of 86, meaning it performs better than 86% of all GPUs in the database.

Q: At which resolution does the Medium preset provide a minimum FPS above 60?

A: The Medium preset's minimum FPS is above 60 at both 2560x1440 (106 FPS) and 3840x2160 (63 FPS). At 1920x1080, the minimum FPS is 143.

Q: What is the boost clock of the RTX 5070 Ti?

A: The GPU's boost clock is 2452 MHz, with a base clock of 2295 MHz.

Measured FPS Breakdown

The following data represents the measured average FPS for the AMD Ryzen 5 5600GT and NVIDIA GeForce RTX 5070 Ti in Rust.

At 3840x2160, the average FPS by preset is:

• Low: 110 FPS
• Medium: 74 FPS (min 63, max 85)
• High: 62 FPS
• Ultra: 47 FPS

At 2560x1440, the average FPS by preset is:

• Low: 173 FPS
• Medium: 125 FPS (min 106, max 144)
• High: 106 FPS
• Ultra: 80 FPS

At 1920x1080, the average FPS by preset is:

• Low: 196 FPS
• Medium: 169 FPS (min 143, max 194)
• High: 154 FPS
• Ultra: 117 FPS

The data shows a consistent hierarchy across all resolutions: Low is fastest, followed by Medium, then High, with Ultra being the slowest. The Medium preset provides the most balanced experience, with minimum FPS values that are significantly higher than those of the High and Ultra presets.

CPU Role

The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor based on the Zen 3 architecture. It has a base clock of 3.60 GHz and a boost clock of 4.60 GHz. The CPU's 16 MB of L3 cache and dual-channel DDR4 memory support are adequate for gaming. Its benchmark scores, such as a Cinebench R23 multi-core score of 17272 and a single-core score of 2438, place it in the 74th percentile of all CPUs. The data suggests that the CPU is not the primary bottleneck at higher resolutions and settings, where the GPU is heavily loaded. However, at 1080p with the Low preset, the FPS of 196 is likely limited by the CPU's single-thread performance, as the GPU could potentially render more frames if the CPU could feed it faster.

The CPU's nearest rivals, such as the Intel Core i5-12490F, have nearly identical average benchmark scores (20802 vs 20733 for the 5600GT), confirming that it is a solid mid-range performer. In the context of this combo, the CPU's role is to provide adequate physics and game logic processing. The data shows that while the CPU can support high frame rates, it does not allow the RTX 5070 Ti to reach its full potential in all scenarios. For instance, at 1080p Low, the GPU is capable of more than 196 FPS, but the CPU limits the output. At 4K, the CPU's workload is relatively lower compared to the GPU, so the performance is dictated almost entirely by the graphics card. The CPU's 6 cores and 12 threads are sufficient for Rust, but they are not so powerful that they never constrain the system. The combo rank of 501 out of 3723 is a direct result of this CPU-GPU pairing, where the GPU is the star performer, and the CPU is a capable but not exceptional partner.