Roblox

The Intel Core i7-12700KF paired with the NVIDIA GeForce RTX 3060 Ti delivers a remarkably fluid experience in Roblox, with the benchmark data showing that the game is largely bound by the graphics card at higher settings and by the CPU at lower settings. Across all resolutions, the frame rate scales predictably with the workload, but the margins between presets reveal distinct bottlenecks that shift depending on whether the scene is fill-rate limited or draw-call limited.

Resolution Scaling

The measured FPS data shows a clear pattern of diminishing returns as resolution increases, which is typical for a game that is not heavily optimized for high-end hardware. At 1920x1080 with Low settings, the combo produces 305.6 FPS, which drops to 206.2 FPS at 2560x1440 and further to 116.2 FPS at 3840x2160. This represents a 62% reduction in frame rate from 1080p to 4K at Low settings, indicating that the GPU is being pushed harder at each step. The scaling is not linear, though, as the gap between 1440p and 4K (90 FPS difference) is smaller than the gap between 1080p and 1440p (99.4 FPS difference), suggesting that the CPU begins to play a more significant role in limiting performance at higher resolutions.

The situation changes when looking at Ultra settings. At 1080p Ultra, the combo achieves 198.6 FPS, which falls to 137 FPS at 1440p and 77.1 FPS at 4K. The drop from 1080p to 1440p is 61.6 FPS, while the drop from 1440p to 4K is 59.9 FPS, showing a more consistent scaling pattern. This consistency implies that at Ultra settings, the GPU is the primary limiting factor across all resolutions, as the increased shading and texture work scales directly with pixel count. In contrast, the Low and Medium presets show larger relative drops between 1080p and 1440p, which points to the CPU being able to feed frames faster at lower resolutions until the GPU becomes the bottleneck.

The data indicates that the RTX 3060 Ti is the dominant constraint at 4K, where even Low settings only produce 116.2 FPS. At 1080p, however, the CPU’s 12 cores and 20 threads are sufficient to push frame rates well above 300 FPS at Low settings, suggesting that the processor is not fully utilized until the GPU load is reduced to a minimum. The 4K Ultra result of 77.1 FPS is the lowest measured value, confirming that the pixel throughput of the GPU is the limiting factor in the most demanding configuration.

How This Combo Ranks

According to the comboRankInGame metric, this specific pairing of the Intel Core i7-12700KF and NVIDIA GeForce RTX 3060 Ti ranks 1286 out of 1800 tested combinations in Roblox. This places it in the 71st percentile of all combos, meaning roughly 71% of tested systems perform better in this game. The rank is notable because the individual components are not top-tier performers; the CPU sits in the 89th percentile among all CPUs, while the GPU is in the 69th percentile among all GPUs. The combined result being lower than either component’s individual percentile suggests that Roblox is sensitive to the balance between processor and graphics card, and this pairing may have a slight mismatch.

The CPU’s nearest rivals, based on average benchmark scores, include the Intel Core i5-14400 with a deltaPct of 0.1% and the Intel Core i9-12900HX with a deltaPct of 0.2%. These differences are negligible, meaning the i7-12700KF performs nearly identically to these alternatives in synthetic tests. Similarly, the GPU’s nearest rivals include the AMD Radeon RX 6700M with a deltaPct of -0.2% and the AMD Radeon RX 6600 with a deltaPct of -0.5%, again showing that the RTX 3060 Ti is closely matched with these cards in raw compute performance. The rank of 1286 indicates that while the hardware is competent, it does not excel in Roblox specifically, likely due to the game’s engine favoring other component combinations.

GPU Role

The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with 8 GB of GDDR6 memory on a 256-bit bus, providing a bandwidth of 448.0 GB/s. The GPU has 4864 shading units, 152 texture mapping units, and 80 ROPs, with a base clock of 1410 MHz and a boost clock of 1665 MHz. The memory operates at 1750 MHz, which translates to 14 Gbps effective, and the card achieves a pixel rate of 133.2 GPixel/s and a texture rate of 253.1 GTexel/s. These specifications place the card in the 69th percentile among all GPUs, with an average benchmark score of 25120, which is nearly identical to the AMD Radeon RX 6700M (25180) and the AMD Radeon RX 6600 (25235).

In Roblox, the GPU’s role is evident from the measured FPS at 4K, where the card is clearly the limiting factor. The 4K Ultra result of 77.1 FPS is well below the 1440p Ultra result of 137 FPS, showing that the GPU’s fill rate and memory bandwidth are insufficient to maintain high frame rates at extreme resolutions. The 8 GB VRAM is sufficient for Roblox’s relatively simple textures, as the game does not appear to exceed this capacity at any measured settings. The boost clock of 1665 MHz is modest by modern standards, but the card’s 16.20 TFLOPS FP32 performance is adequate for the game’s lighting and particle effects, which are not particularly demanding. The GPU’s benchmark scores, including a Passmark G3D score of 20349 and a 3DMark Steel Nomad DX12 score of 2626, reinforce that the card is a mid-range performer that struggles with 4K gaming in this title.

Settings Recommendations

The measured FPS data suggests that the Medium preset offers the best balance between visual quality and performance for this combo. At 1920x1080 Medium, the system achieves 276.9 FPS, which is only slightly below the Low preset’s 305.6 FPS but provides a noticeable improvement in graphical fidelity. Moving to High settings at 1080p drops the frame rate to 248.9 FPS, still well above the 60 FPS threshold but with diminishing returns for the additional GPU load. At 1440p, Medium produces 187.6 FPS, which is a 13% reduction from Low (206.2 FPS) but remains smooth for competitive play. The Ultra preset is less appealing, as it reduces the frame rate to 198.6 FPS at 1080p and 137 FPS at 1440p, which are still playable but not worth the performance cost relative to High.

For 4K gaming, the Medium preset yields 106.7 FPS, which is the highest frame rate among all settings that still provides decent visuals. The Low preset at 4K achieves 116.2 FPS, but the visual compromise is significant, and the difference of 9.5 FPS over Medium is marginal. The High preset at 4K drops to 92.2 FPS, and Ultra falls to 77.1 FPS, both of which are below the 100 FPS mark and show that the GPU is not powerful enough for high-quality 4K in this game. The data indicates that Medium is the recommended setting for users who want a consistent experience across all resolutions, as it maintains frame rates above 100 FPS even at 4K.

Measured FPS Breakdown

At 1920x1080, the frame rates are consistently high across all presets. Low delivers 305.6 FPS, Medium delivers 276.9 FPS, High delivers 248.9 FPS, and Ultra delivers 198.6 FPS. The spread between Low and Ultra is 107 FPS, showing that the settings have a substantial impact on performance at this resolution. The CPU’s 12 cores and 20 threads are able to keep up with the GPU’s output, as even the Ultra preset exceeds 190 FPS.

At 2560x1440, the frame rates drop noticeably. Low produces 206.2 FPS, Medium produces 187.6 FPS, High produces 164.9 FPS, and Ultra produces 137 FPS. The gap between Low and Ultra narrows to 69.2 FPS, indicating that the GPU is becoming more of a bottleneck. The 1440p results are all above 130 FPS, which is excellent for a game like Roblox that benefits from high refresh rates.

At 3840x2160, the performance degrades further. Low achieves 116.2 FPS, Medium achieves 106.7 FPS, High achieves 92.2 FPS, and Ultra achieves 77.1 FPS. The difference between Low and Ultra is 39.1 FPS, which is the smallest margin at any resolution, confirming that the GPU is the limiting factor at 4K. The 4K results are still playable, but the Ultra preset barely maintains a 77 FPS average, which is below the 100 FPS threshold that many gamers prefer.

CPU Role

The Intel Core i7-12700KF is a 12-core, 20-thread processor based on the Alder Lake architecture, with a base clock of 3.60 GHz and a boost clock of 5.00 GHz. It has 25 MB of shared L3 cache and supports both DDR4 and DDR5 memory, though the measured FPS data does not indicate which memory type was used. The CPU’s benchmark scores are strong, with a Cinebench R23 multi-core score of 28979 and a single-core score of 4091, placing it in the 89th percentile among all CPUs. Its average benchmark score of 35355 is nearly identical to the Intel Core i5-14400 (35336) and the Intel Core i7-13800H (35416), showing that it is well-matched with these rivals.

In Roblox, the CPU’s role is most apparent at 1080p Low settings, where the system achieves 305.6 FPS. This high frame rate suggests that the CPU is capable of feeding the GPU with enough draw calls to saturate its output, and the 12 cores are likely not fully utilized. The single-thread performance, as measured by a Passmark single-thread score of 3984, is critical for Roblox, which is known to be lightly threaded. The boost clock of 5.00 GHz provides the high frequency needed for such workloads. The CPU’s 20 threads are more than sufficient for the game, and the data shows that the processor does not become a bottleneck until the GPU is pushed to higher resolutions and settings. At 4K Ultra, the CPU is not the limiting factor, as the GPU’s 77.1 FPS is far below what the processor could theoretically deliver. The CPU’s Passmark multi-thread score of 34092 and Geekbench multi-core score of 13596 indicate that it has ample headroom for more demanding games, but in Roblox, it performs admirably without being the constraining component.