Roblox

The Intel Core i5-14600KF paired with the AMD Radeon RX 9070 delivers measured frame rates in Roblox that span from 119.8 FPS at 4K Ultra to 472 FPS at 1080p Low, based on the data in this benchmark set. The CPU, a 14-core, 20-thread Raptor Lake Refresh part with a boost clock of 5.30 GHz, and the GPU, a 16 GB RDNA 4.0 card with a boost clock of 2520 MHz, combine to produce results that rank 602nd out of 1800 tested combos for this game. The following sections break down how resolution scaling, GPU characteristics, and settings choices affect the experience.

Resolution Scaling

The measured FPS data shows a clear and consistent drop as resolution increases from 1920x1080 to 3840x2160. At Low settings, the average frame rate falls from 472 FPS at 1080p to 316.4 FPS at 1440p, and then to 178.3 FPS at 4K. The same pattern appears at Medium, where 1080p yields 431.2 FPS, 1440p drops to 289.5 FPS, and 4K lands at 161 FPS. High settings follow suit: 378.8 FPS at 1080p, 256.5 FPS at 1440p, and 142.8 FPS at 4K. Ultra settings show the steepest decline, with 312.1 FPS at 1080p, 205.4 FPS at 1440p, and 119.8 FPS at 4K.

The magnitude of the drop from 1080p to 4K is substantial across every preset. For example, at High settings, the 4K result (142.8 FPS) is less than half of the 1080p result (378.8 FPS). This scaling behavior indicates that the GPU becomes the primary limiting component as pixel count rises. At 1080p, the CPU's strong single-thread performance—evidenced by its Cinebench R23 single-core score of 4643 and a 93rd percentile ranking among all CPUs—is sufficient to feed the GPU, allowing frame rates to reach very high levels. At 4K, the GPU's rendering workload dominates, and the frame rate settles into a range that is still playable but far lower than at lower resolutions.

The data also shows that the gap between Low and Ultra settings narrows as resolution increases. At 1080p, the difference between Low (472 FPS) and Ultra (312.1 FPS) is 159.9 FPS. At 4K, the same comparison yields a difference of only 58.5 FPS (178.3 vs. 119.8). This suggests that at higher resolutions, the GPU is already near its limit, so additional settings headroom has less impact on frame rate than it does at 1080p, where the CPU can still push the GPU harder.

GPU Role

The AMD Radeon RX 9070 brings 16 GB of GDDR6 memory on a 256-bit bus, with a memory bandwidth of 644.6 GB/s. Its base clock is 1330 MHz, with a game clock of 2070 MHz and a boost clock of 2520 MHz. These specifications are directly relevant to Roblox's rendering demands. The 16 GB VRAM provides ample capacity for high-resolution textures and complex scenes, while the 644.6 GB/s bandwidth supports rapid data transfer between the GPU and memory, which is critical when moving from 1080p to 4K.

The GPU's average benchmark score of 34780 places it in the 79th percentile among all GPUs. Its nearest rivals in the benchmark database include the NVIDIA A2 (average score 34866, deltaPct -0.2), the NVIDIA Quadro GV100 (34677, deltaPct 0.3), the AMD Radeon HD 7970 (34541, deltaPct 0.7), and the AMD Radeon PRO W6400 (34511, deltaPct 0.8). These comparisons show that the RX 9070 sits within a tight cluster of GPUs, with a score that is 0.2% behind the A2 and 0.3% ahead of the Quadro GV100. In Roblox specifically, the measured FPS results indicate that the GPU is capable of maintaining high frame rates even at 4K, though the Ultra preset at 4K drops to 119.8 FPS, which is the lowest measured value in the entire set.

The GPU's architecture, RDNA 4.0, and its 4 nm process node are part of its design, but the practical impact is seen in the frame rates. The boost clock of 2520 MHz and game clock of 2070 MHz suggest that the card can sustain high performance under load, which is consistent with the 4K results that remain above 119 FPS even at Ultra settings. The 16 GB memory size is particularly notable for a game like Roblox, which can have large user-generated worlds; the capacity ensures that texture streaming and draw calls do not become a bottleneck at higher resolutions.

FAQ

Q: What is the average FPS at 1440p High settings?

A: The measured average is 256.5 FPS.

Q: How much VRAM does the AMD Radeon RX 9070 have?

A: It has 16 GB of GDDR6 memory.

Q: What is the boost clock of the Intel Core i5-14600KF?

A: The boost clock is 5.30 GHz.

Q: What is the combo's rank in Roblox among all tested configurations?

A: It ranks 602nd out of 1800 combos.

Q: What is the GPU's memory bandwidth?

A: The memory bandwidth is 644.6 GB/s.

Q: What is the launch MSRP of the Intel Core i5-14600KF?

A: The launch MSRP is $294.

Measured FPS Breakdown

The following table lists all measured average FPS values for the Intel Core i5-14600KF + AMD Radeon RX 9070 combination in Roblox, organized by resolution and settings preset.

| Resolution | Settings | Avg FPS |

|------------|----------|---------|

| 3840x2160 | High | 142.8 |

| 3840x2160 | Low | 178.3 |

| 3840x2160 | Medium | 161.0 |

| 3840x2160 | Ultra | 119.8 |

| 2560x1440 | High | 256.5 |

| 2560x1440 | Low | 316.4 |

| 2560x1440 | Medium | 289.5 |

| 2560x1440 | Ultra | 205.4 |

| 1920x1080 | High | 378.8 |

| 1920x1080 | Low | 472.0 |

| 1920x1080 | Medium | 431.2 |

| 1920x1080 | Ultra | 312.1 |

At 1080p, the range spans from 312.1 FPS (Ultra) to 472 FPS (Low). At 1440p, the range is 205.4 FPS (Ultra) to 316.4 FPS (Low). At 4K, the range is 119.8 FPS (Ultra) to 178.3 FPS (Low). The data shows that even the lowest measured value—119.8 FPS at 4K Ultra—remains above typical 60 FPS thresholds, indicating that this combo can handle Roblox at any resolution and preset without dropping below playable frame rates.

How This Combo Ranks

In the benchmark database, this specific CPU-GPU combination ranks 602nd out of 1800 tested combos for Roblox. That places it in the upper portion of the field, ahead of more than half of all tested configurations. The CPU itself is a strong performer, with a percentile rank of 93 among all CPUs and an average benchmark score of 49367. Its nearest rivals include the Intel Core i5-14600K (avg score 49166, deltaPct 0.4), the AMD EPYC 4345P (49595, deltaPct -0.5), the AMD Ryzen 9 5950X (49062, deltaPct 0.6), and the Intel Xeon Gold 5318H (48698, deltaPct 1.4). The i5-14600KF is 0.4% ahead of the i5-14600K and 0.6% ahead of the Ryzen 9 5950X, showing that it sits at the top of its immediate performance class.

The GPU, with a percentile rank of 79 among all GPUs, is relatively weaker than the CPU in this pairing. Its average benchmark score of 34780 is 0.2% behind the NVIDIA A2 and 0.3% ahead of the NVIDIA Quadro GV100. This imbalance suggests that the CPU is not the limiting factor in Roblox; instead, the GPU's performance ceiling determines the frame rates at higher resolutions. The combo's overall rank of 602 out of 1800 reflects this balance—it is a high-performing system, but not at the very top of the database, likely because the GPU's percentile is lower than the CPU's.

Settings Recommendations

The measured FPS data provides clear guidance for choosing a settings preset based on resolution. At 1080p, all four presets deliver frame rates above 300 FPS, with the lowest being Ultra at 312.1 FPS and the highest being Low at 472 FPS. Since even Ultra exceeds 300 FPS, users can select Ultra without sacrificing smoothness; the difference between presets is unlikely to be perceptible on most displays, which typically refresh at 144 Hz or lower.

At 1440p, the situation is similar. Ultra yields 205.4 FPS, which is still well above 144 Hz, and High produces 256.5 FPS. Medium and Low are even higher, at 289.5 and 316.4 FPS respectively. For a 1440p monitor with a 144 Hz refresh rate, Ultra is a safe choice, as it remains above 200 FPS. If a user prefers maximum frame rates, Low offers 316.4 FPS, but the visual quality trade-off is significant.

At 4K, the choice becomes more nuanced. Ultra drops to 119.8 FPS, which is below 120 FPS but still playable. High settings yield 142.8 FPS, a 23 FPS improvement over Ultra. Medium provides 161 FPS, and Low reaches 178.3 FPS. For a 4K display with a 120 Hz refresh rate, High is the best balance, as it stays above 120 FPS while retaining higher visual fidelity than Medium or Low. If a 60 Hz display is used, Ultra is acceptable, but High offers a comfortable margin. The data shows that High at 4K is the recommended preset for this combo, as it delivers 142.8 FPS—a solid improvement over Ultra's 119.8 FPS—without the visual degradation of Medium or Low.