Roblox

Roblox is a deceptively demanding title when pushed to its limits, and the data for the Intel Core i5-13400F paired with the AMD Radeon RX 9060 reveals a system that scales predictably across resolutions. The measured frames per second (FPS) range from a high of 338 at 1080p Low to a low of 83 at 4K Ultra, indicating a configuration that is well-balanced for high-refresh-rate gaming at standard resolutions but begins to show its constraints at 4K. The analysis of these numbers shows a system where the GPU becomes the primary bottleneck as resolution increases, while the CPU’s 10 cores and 16 threads provide a solid foundation for the game’s physics and logic threads.

Resolution Scaling

The FPS drop from 1920x1080 to 3840x2160 is significant but not catastrophic, pointing to a GPU that is working progressively harder at higher pixel counts. At High settings, the average FPS falls from 272 at 1080p to 182 at 1440p, a reduction of 90 FPS. Moving from 1440p to 4K High, the frame rate drops further to 103 FPS, another 79 FPS decrease. This pattern of roughly halving the frame rate with each major resolution step-up is characteristic of a system where the AMD Radeon RX 9060’s 8 GB of VRAM and 128-bit memory bus are being saturated by the increased pixel workload, rather than a CPU limitation.

The scaling from Low to Ultra settings at each resolution provides further insight into the limiting component. At 1080p, the spread between Low (338 FPS) and Ultra (221 FPS) is 117 FPS, showing that the CPU can feed the GPU enough data to maintain very high frame rates even at lower settings. However, at 4K, the spread narrows to just 45 FPS (128 FPS at Low versus 83 FPS at Ultra). This compression of the FPS range at 4K suggests that the GPU is the limiting factor; it is so overwhelmed by the pixel count that reducing settings from Ultra to Low only yields a modest gain, as the rasterization and shading work at 4K remains heavy regardless of the quality preset. The data implies that for 4K gaming, the RX 9060 is the primary constraint, whereas at 1080p, the system is more balanced, with the CPU’s performance being sufficient to push high frame rates.

How This Combo Ranks

The measured performance places this combination at rank 1729 out of 3010 tested combos for Roblox, which puts it in the 57th percentile of all tested systems. This mid-pack ranking is interesting given the high raw frame rates observed. The data suggests that while this combo delivers excellent absolute FPS in Roblox, many other combinations—likely with more powerful GPUs—achieve even higher scores, especially at lower resolutions where frame rates can climb into the 400-500 FPS range. The ranking indicates that this system is capable, but not top-tier, in the context of all possible hardware pairings.

Looking at the nearest rivals for the CPU and GPU individually helps contextualize this ranking. The Intel Core i5-13400F has an average benchmark score of 25292, placing it within 0.3% of the AMD Ryzen 5 5600X3D and the Intel Core 5 120, while being 0.4% ahead of the AMD Ryzen 7 6800H. This shows the CPU is a solid mid-range performer. The AMD Radeon RX 9060, with an average score of 16014, is 0.7% behind the NVIDIA GeForce RTX 3060 Ti and 1% ahead of the AMD Radeon RX 7700. This GPU is positioned in the upper-mid-range tier. The combination of these two components, while individually competitive, does not break into the top echelons of the combo ranking, likely because other pairings with higher-end GPUs simply push more pixels and frames in a lightweight game like Roblox.

Settings Recommendations

For the best experience according to the measured rows, the Medium preset appears to be the sweet spot. At 1080p, Medium delivers an average of 308 FPS with a minimum of 262 FPS and a maximum of 354 FPS. This provides a frame rate well above the refresh rate of most high-end monitors, while the minimum FPS ensures smooth gameplay even in busy scenes. The High preset at 1080p offers 272 FPS, which is still excellent, but the Medium preset’s higher minimum frame rate suggests better consistency. At 1440p, Medium again shines with an average of 205 FPS and a minimum of 175 FPS, which is ideal for high-refresh-rate 1440p monitors. The Ultra preset at 1440p drops to 147 FPS, which is still playable but sacrifices the headroom that competitive players might want.

At 4K, the recommendations change due to the GPU’s limitations. Ultra at 4K yields 83 FPS, which is playable but not ideal for fast-paced action. Medium at 4K provides 116 FPS with a minimum of 99 FPS, which is a much better balance and is likely the highest settings that can maintain a stable 100+ FPS experience. Low at 4K offers 128 FPS, but the visual quality loss is likely too severe for most users. Therefore, for a balanced experience across all resolutions, Medium is the recommended preset, offering the best trade-off between visual fidelity and frame rate consistency.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of the system’s performance across nine distinct configurations. At 1920x1080, the average FPS starts at 338 for Low settings, decreases to 308 for Medium, drops to 272 for High, and bottoms out at 221 for Ultra. The Medium preset at 1080p shows a minimum FPS of 262 and a maximum of 354, indicating a wide performance envelope. At 2560x1440, the averages are 226 FPS for Low, 205 FPS for Medium, 182 FPS for High, and 147 FPS for Ultra. The 1440p Medium preset records a minimum of 175 FPS and a maximum of 236 FPS. At 3840x2160, the averages are significantly lower: 128 FPS for Low, 116 FPS for Medium, 103 FPS for High, and 83 FPS for Ultra. The 4K Medium preset shows a minimum of 99 FPS and a maximum of 134 FPS.

These numbers reveal a few key trends. The performance delta between Low and Ultra is largest at 1080p, with a 117 FPS difference, and smallest at 4K, with a 45 FPS difference. This reinforces the idea that the GPU is the bottleneck at higher resolutions. The minimum FPS data, only available for Medium presets, shows that at 1080p the average (308) is much closer to the maximum (354) than the minimum (262), suggesting occasional dips that are still well within playable range. At 4K, the minimum of 99 FPS for Medium is close to the average of 116 FPS, indicating more consistent frame pacing at lower resolutions, perhaps due to the GPU being fully utilized. The data suggests that for users with 1080p or 1440p monitors, this combo will provide a buttery-smooth experience, while 4K users will need to carefully select settings to maintain high frame rates.

FAQ

Q: What is the highest average frame rate this combo achieves in Roblox?

A: The highest average frame rate measured is 338 FPS, which occurs at 1920x1080 resolution with Low settings.

Q: Can this system handle 4K gaming in Roblox?

A: Yes, but with some compromises. At 4K Ultra, the average FPS is 83, which is playable. For a smoother experience, the Medium preset at 4K delivers 116 FPS average with a minimum of 99 FPS.

Q: What is the difference in performance between 1080p and 1440p at High settings?

A: At 1080p High, the average FPS is 272. At 1440p High, the average FPS drops to 182, a difference of 90 FPS.

Q: How does the CPU compare to its closest rivals?

A: The Intel Core i5-13400F has an average benchmark score of 25292. It is 0.3% slower than the AMD Ryzen 5 5600X3D, 0.3% slower than the Intel Core 5 120, and 0.4% faster than the AMD Ryzen 7 6800H.

Q: How does the GPU compare to its closest rivals?

A: The AMD Radeon RX 9060 has an average benchmark score of 16014. It is 0.7% slower than the NVIDIA GeForce RTX 3060 Ti and 1% faster than the AMD Radeon RX 7700.

Q: What is the best setting preset for a 1440p monitor?

A: The Medium preset at 2560x1440 provides an average of 205 FPS with a minimum of 175 FPS, which is ideal for high-refresh-rate 1440p monitors and offers the best balance of quality and performance.

CPU Role

The Intel Core i5-13400F is a 10-core, 16-thread processor based on the Raptor Lake architecture, built on a 10 nm process. Its base clock is 2.50 GHz, with a boost clock of 4.60 GHz. This configuration is more than sufficient for Roblox, which is a sandbox game that often involves complex user-generated worlds with many dynamic objects and physics interactions. The data shows a single-thread score of 960 in 3dMark and a Geekbench single-core score of 1996, which are solid numbers that ensure the main game thread runs efficiently. The multi-threaded performance is also strong, as evidenced by a Cinebench R23 multi-core score of 22604, which helps when Roblox utilizes multiple threads for rendering different parts of the world or handling background tasks.

The CPU’s 20 MB of shared L3 cache and support for both DDR4 and DDR5 memory provide a flexible platform. In the context of Roblox, the CPU’s role is to maintain a steady stream of draw calls and game logic updates. At 1080p Low settings, the system achieves 338 FPS, which suggests that the CPU is not a bottleneck at this resolution. However, the data implies that even the strongest CPU would not push frame rates much higher in Roblox, as the game’s engine often has its own limits. The CPU’s performance relative to its rivals (being within 0.4% of the AMD Ryzen 7 6800H and AMD Ryzen 9 6900HS) indicates that it provides a consistent, high-level baseline for this game. The processor’s 65W TDP also suggests that it runs cool and efficiently, allowing sustained performance without thermal throttling in most systems.

GPU Role

The AMD Radeon RX 9060 is built on the RDNA 4.0 architecture using a 4 nm process, featuring 1792 shading units and 28 ray tracing cores. It has a base clock of 1700 MHz, a game clock of 2400 MHz, and a boost clock of 2990 MHz. The GPU is equipped with 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 288.0 GB/s. In Roblox, the GPU’s role is to handle the rendering of the game’s blocky but often visually complex environments, including lighting effects and shadows. The data shows that the GPU is the primary scaling factor across resolutions. At 1080p, the GPU can render frames quickly, achieving 272 FPS at High settings. However, as the resolution increases to 4K, the pixel workload quadruples, and the GPU’s 8 GB VRAM and bandwidth become more strained, leading to lower frame rates.

The GPU’s performance metrics show a strong mid-range card. Its Passmark G3D score of 17631 and 3DMark Steel Nomad score of 3322 place it in a competitive position against its rivals, slightly behind the RTX 3060 Ti. The GPU’s 21.43 TFLOPS of FP32 compute power is ample for Roblox’s relatively simple shaders. However, the 4K Ultra result of 83 FPS indicates that the GPU is near its limits at this resolution with maximum settings. The data suggests that while the RX 9060 is a capable card for 1080p and 1440p gaming, users targeting 4K will need to rely on the Medium or High presets to maintain smooth frame rates. The GPU’s 132W TDP and dual-slot design make it a reasonably efficient and compact solution for a mid-range gaming PC, and its support for PCIe 5.0 x16 ensures it will not bottleneck future CPU upgrades.