Roblox

The AMD Ryzen AI Max+ 395 paired with the AMD Radeon 8060S integrated graphics delivers a remarkably consistent experience in Roblox, with frame rates that remain highly playable even at 4K resolution. The data shows a system that scales predictably with resolution, with the performance gap between 1080p and 4K being substantial but not prohibitive, indicating a balanced configuration where neither component becomes a severe bottleneck at typical gaming settings.

Resolution Scaling

The measured frame rates demonstrate a clear and predictable decline as resolution increases, which is characteristic of a system where the GPU workload scales directly with pixel count. At 1080p with Low settings, the combo achieves 338 FPS. Moving to 1440p drops this to 226 FPS, a reduction of 112 FPS or approximately 33%. The jump to 4K further reduces performance to 128 FPS at Low settings, which is 210 FPS below the 1080p result.

This scaling pattern suggests that at 1080p, the CPU plays a more significant role in limiting performance, as the GPU has ample headroom to render frames quickly. The 1440p results show a more balanced distribution of workload, while 4K results indicate the GPU is becoming the primary limiting factor. The transition from 1080p to 1440p at Medium settings shows a drop from 308 FPS to 205 FPS, while the 4K Medium setting yields 116 FPS. These numbers indicate a fairly linear scaling with pixel count, which is typical for a game like Roblox that does not heavily tax modern hardware.

The delta between Low and Ultra settings widens as resolution increases. At 1080p, the difference between Low (338 FPS) and Ultra (221 FPS) is 117 FPS. At 1440p, this gap narrows to 79 FPS (226 vs. 147), and at 4K, it is 45 FPS (128 vs. 83). This narrowing gap suggests that at higher resolutions, the GPU is already near its limit even at Low settings, so the additional workload from higher quality settings has less relative impact.

CPU Role

The AMD Ryzen AI Max+ 395 is a 16-core, 32-thread processor based on the Zen 5 architecture, built on a 4nm process. It features a base clock of 3.00 GHz and a boost clock of 5.10 GHz, with 64 MB of shared L3 cache. In Roblox, which is not known for heavy multi-threading, the single-core performance is often more relevant than the core count. The CPU achieves a Cinebench R23 single-core score of 2044 and a multi-core score of 35314, indicating strong per-thread performance.

The benchmark results show that this CPU has a 95th percentile ranking among all CPUs, placing it in the top tier of processors. Its nearest rival, the Intel Core i9-14900K, has an average benchmark score that is 1.7% higher, while the AMD Ryzen Threadripper PRO 9945WX is 1.6% lower. This close grouping suggests that the CPU is not a limiting factor in Roblox at any resolution tested. Even at 1080p with Low settings, where the CPU would be most likely to bottleneck, the system still delivers 338 FPS, indicating that the processor can feed frames faster than most displays can refresh.

The 16-core configuration provides substantial headroom for background tasks and any future game updates that may add multi-threading. The 256.0 GB/s memory bandwidth from the quad-channel LPDDR5X support is also beneficial, as the integrated GPU shares this memory for its operations. This high bandwidth helps mitigate the performance penalty typically associated with integrated graphics.

How This Combo Ranks

The combo ranks 1729 out of 3010 tested combinations in Roblox, placing it in the 57th percentile of all tested systems. This ranking may seem modest given the individual component performance, but it reflects the fact that many desktop systems with discrete GPUs will outperform an integrated solution in a game that is primarily GPU-bound at higher resolutions.

The GPU itself ranks in the 87th percentile among all GPUs, with an average benchmark score of 55757. Its nearest rival, the AMD Radeon RX 6750 GRE 12 GB, has a score that is 0.1% higher, while the NVIDIA GeForce RTX 4080 is 2.8% lower. This places the Radeon 8060S in the upper tier of graphics solutions, which explains why the combo can achieve playable frame rates at 4K. The CPU's 95th percentile ranking is higher than the GPU's 87th percentile, suggesting that the CPU is the stronger component in this pairing, but the integrated nature of the GPU means it cannot be upgraded independently.

The combo's rank in Roblox specifically is lower than what the individual component percentiles might suggest, which indicates that the game's optimization and the integrated GPU's memory sharing with the CPU play a role in the final performance. Systems with dedicated VRAM may have an advantage in certain scenarios, even if their raw compute power is similar.

FAQ

Q: What is the maximum average FPS achievable at 1080p with this combo?

A: The highest average FPS recorded is 338 at 1080p with Low settings. Ultra settings reduce this to 221 FPS.

Q: How does the CPU's performance compare to its nearest rivals?

A: The AMD Ryzen AI Max+ 395 has an average benchmark score of 77740. The Intel Core i9-14900K is 1.7% higher, the AMD Ryzen Threadripper PRO 9945WX is 1.6% lower, and the AMD Ryzen 9 8945HX is 2.0% lower.

Q: Is the GPU or CPU the limiting factor at 4K resolution?

A: At 4K, the GPU becomes the primary limiting factor. The frame rate drops from 338 FPS at 1080p Low to 128 FPS at 4K Low, a 62% reduction that indicates the GPU is struggling to keep up with the pixel count.

Q: What is the combo's overall ranking in Roblox?

A: The combo ranks 1729 out of 3010 tested combinations, placing it just below the median of all tested systems.

Q: Does the Ultra preset provide a smooth experience at 1440p?

A: Yes, the Ultra preset at 1440p delivers an average of 147 FPS, which is well above the 60 FPS threshold for smooth gameplay. The 4K Ultra preset, however, drops to 83 FPS.

Q: How much performance is lost when moving from 1080p to 4K at Medium settings?

A: At Medium settings, the 1080p result is 308 FPS, while the 4K result is 116 FPS. This represents a 192 FPS drop, or approximately 62% less performance.

GPU Role

The AMD Radeon 8060S is an integrated GPU based on the RDNA 3.5 architecture, built on the same 4nm process as the CPU. It features 2560 shading units, 160 texture mapping units, and 64 raster output units, with 40 ray tracing cores. The GPU operates at a base clock of 1295 MHz and a boost clock of 2900 MHz, delivering 14.85 TFLOPS of FP32 performance.

In Roblox, the GPU's role becomes increasingly important as resolution increases. At 1080p, the GPU is not fully utilized, as evidenced by the high frame rates across all settings. The difference between Low and Ultra at 1080p is 117 FPS, which shows that the GPU has headroom to render more complex scenes. At 4K, however, the GPU is clearly the limiting factor. The Ultra preset at 4K produces only 83 FPS, which is below the 100 FPS threshold that many gamers consider optimal for competitive play.

The GPU's memory is system shared, meaning it draws from the same LPDDR5X pool as the CPU. This configuration can lead to bandwidth contention, but the 256.0 GB/s memory bandwidth helps mitigate this issue. The GPU's 87th percentile ranking among all GPUs places it above many discrete solutions, and its nearest rival, the AMD Radeon RX 6750 GRE 12 GB, is only 0.1% faster in average benchmark score. This indicates that the integrated solution performs admirably, though it cannot match the raw memory bandwidth of a dedicated GPU with its own VRAM.

Settings Recommendations

Based on the measured frame rates, the Medium preset offers the best balance of visual quality and performance across all resolutions. At 1080p, Medium delivers 308 FPS, which is only 30 FPS less than Low but provides significantly better visual fidelity. The Medium preset also includes measured minimum and maximum FPS values, with 262 FPS minimum and 354 FPS maximum at 1080p, indicating consistent frame pacing.

At 1440p, Medium achieves 205 FPS with a minimum of 175 FPS, which is well above the refresh rate of most monitors. The High preset at 1440p delivers 182 FPS, which is still excellent, but the 23 FPS difference between Medium and High may not justify the visual improvement for competitive players. At 4K, Medium produces 116 FPS, which is above the 100 FPS threshold for smooth gameplay, while High drops to 103 FPS and Ultra falls to 83 FPS.

For players with 4K displays, the Medium preset is the recommended choice, as it provides the highest frame rate that remains above 100 FPS. The Low preset at 4K offers 128 FPS, but the visual quality reduction is significant. For 1080p and 1440p displays, the High preset is a viable option, with 272 FPS and 182 FPS respectively, but Medium offers a better margin for frame rate drops during intense gameplay moments.

Measured FPS Breakdown

The complete set of measured average frame rates is as follows:

At 1920x1080 resolution, the Low preset delivers 338 FPS, Medium delivers 308 FPS with a minimum of 262 FPS and maximum of 354 FPS, High delivers 272 FPS, and Ultra delivers 221 FPS. The spread between the lowest and highest settings is 117 FPS, with Low being the fastest and Ultra being the slowest.

At 2560x1440 resolution, Low achieves 226 FPS, Medium achieves 205 FPS with a minimum of 175 FPS and maximum of 236 FPS, High achieves 182 FPS, and Ultra achieves 147 FPS. The performance drop from 1080p to 1440p ranges from 88 FPS at Low (338 to 226) to 74 FPS at Ultra (221 to 147).

At 3840x2160 resolution, Low produces 128 FPS, Medium produces 116 FPS with a minimum of 99 FPS and maximum of 134 FPS, High produces 103 FPS, and Ultra produces 83 FPS. The 4K results show the system's limits, with Ultra falling below 90 FPS. The minimum FPS recorded at 4K Medium is 99, which is still above 60 FPS, indicating that even in demanding scenes, the system maintains playable performance.

The data reveals that the Medium preset is the only setting that provides measured minimum and maximum values at all three resolutions, suggesting that the system is most stable when operating at this quality level. The Ultra preset at 4K, with its 83 FPS average, is the only configuration that falls below 90 FPS, making it the least suitable for high-refresh-rate displays.