Archeage

The AMD Ryzen AI Max+ 395 and AMD Radeon 8060S combination delivers a distinctive performance profile in Archeage, a 2014 MMORPG. The data shows a system where the integrated graphics solution provides substantial frame rates at lower resolutions, but the demands of 4K Ultra prove to be a significant obstacle. This analysis walks through the measured FPS data to explain how the combo behaves across different settings and resolutions, how it ranks against other tested configurations, and the specific roles of the CPU and GPU in shaping the experience.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases, which is typical for a system where the GPU is the primary bottleneck. At 1920x1080 with Low settings, the combo achieves an average of 142 FPS. Moving to 2560x1440 at the same Low settings, the average drops to 95 FPS, a reduction of approximately 33%. At 3840x2160 Low, the average falls further to 55 FPS, which is a 61% drop from the 1080p figure. This scaling indicates that the Radeon 8060S is being heavily taxed by the increasing pixel count, with the frame rate nearly halving each time the resolution roughly doubles.

The trend is consistent across all settings presets. For High settings, the average FPS goes from 86 at 1080p, down to 58 at 1440p, and finally to 33 at 4K. The drop from 1080p to 4K at High settings is a substantial 62%. Similarly, Medium settings see averages of 126, 85, and 49 FPS across the three resolutions, respectively. The Ultra preset shows the most severe scaling, with averages of 58 FPS at 1080p, 39 FPS at 1440p, and 23 FPS at 4K. The difference between 1080p and 4K at Ultra is a 60% reduction in average frame rate.

This scaling behavior strongly suggests that the limiting component at higher resolutions is the GPU. The CPU, with its 16 cores and 32 threads, is less likely to be the bottleneck when the frame rate is dropping due to increased rendering load. The fact that the FPS drops proportionally with pixel count indicates a fill-rate or shading-unit limitation. The Radeon 8060S, despite being an integrated GPU, is pushing a considerable number of pixels, but its 2560 shading units are simply overwhelmed at 4K. The data shows that 1080p is the most comfortable territory for this combo, where it can deliver high frame rates even at Ultra settings, while 4K is only viable for lower settings or for those who prioritize visual fidelity over smooth gameplay.

Settings Recommendations

Based on the measured FPS rows, the optimal settings depend entirely on the target resolution and the player's preference for frame rate versus visual quality. At 1920x1080, the combo is exceptionally capable. The Low preset delivers an average of 142 FPS, which is excellent for competitive play or for maximizing monitor refresh rates. However, the Medium preset offers a more balanced experience, with an average of 126 FPS and a minimum of 107 FPS, ensuring smooth gameplay even in busy scenes. The High preset is also viable, with an average of 86 FPS, which is still well above the standard 60 FPS threshold. Even the Ultra preset manages an average of 58 FPS, which is playable but with occasional dips that could be noticeable in fast-paced encounters. For the best experience at 1080p, the Medium or High presets are recommended, as they provide a significant visual upgrade over Low while maintaining high and stable frame rates.

At 2560x1440, the picture changes. The Low preset is the only one that consistently delivers a high frame rate, with an average of 95 FPS. The Medium preset, with an average of 85 FPS and a minimum of 72 FPS, is also a strong choice, providing a good balance between visual fidelity and smoothness. The High preset drops to an average of 58 FPS, which is right at the edge of the 60 FPS target; it is playable but may feel less fluid during heavy action. The Ultra preset is not recommended at 1440p, as the 39 FPS average falls below the standard for comfortable gameplay. For 1440p, the data suggests that Medium is the sweet spot, offering a substantial improvement over Low without the performance penalty seen with High.

At 3840x2160, the options are limited. The Ultra preset is effectively unplayable, with an average of 23 FPS. The High preset is marginal, with an average of 33 FPS. The Medium preset, with an average of 49 FPS and a minimum of 41 FPS, is the most playable option for 4K, though it still falls short of a locked 60 FPS. The Low preset, with an average of 55 FPS, is the best choice for 4K gameplay, offering a playable frame rate, though it requires a significant sacrifice in visual detail. For players who prioritize smoothness at 4K, the Low preset is the recommended choice, while Medium offers a better visual experience for those willing to accept a frame rate in the 40s to 50s range.

How This Combo Ranks

The combo's overall performance in Archeage places it at rank 1603 out of 2761 tested combinations. This ranking, which puts it in the 58th percentile of all combos, suggests that it is a mid-pack performer specifically for this game. This is a crucial context; while the individual components have high benchmark scores, their combined performance in Archeage is not top-tier. The rank reflects the specific demands of the game and how well this particular CPU-GPU pairing meets them.

The GPU's benchmark data provides some insight into this ranking. The Radeon 8060S has an average benchmark score of 55757 and sits in the 87th percentile of all GPUs. Its nearest rivals include the AMD Radeon RX 6750 GRE 12 GB, which is only 0.1% faster, and the NVIDIA GeForce RTX 5080, which is 0.6% faster. This indicates that the 8060S is a very capable GPU in general terms, but its performance in Archeage is not exceptional on a relative basis. The CPU, the Ryzen AI Max+ 395, is in the 95th percentile of all CPUs, with an average benchmark score of 77740. Its nearest rival, the Intel Core i9-14900K, is 1.7% faster. This suggests the CPU is a high-end part, but the combo's rank in Archeage is dragged down by the GPU's performance at higher resolutions or the game's specific engine limitations.

The 1603rd rank out of 2761 combos indicates that many other pairings, likely with discrete graphics cards, are able to outperform this integrated solution in Archeage. The data suggests that while the Ryzen AI Max+ 395 is a powerful processor, the Radeon 8060S, despite its high benchmark percentile, cannot consistently match the frame rates of dedicated mid-range or high-end discrete GPUs in this MMORPG. The ranking is a holistic measure of the combo's ability to run the game, and it shows that it is a competent but not leading performer, particularly when challenged by higher resolutions and settings.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the combo's performance across all tested configurations. At 1920x1080, the average frame rates are 142 FPS for Low, 126 FPS for Medium (with a minimum of 107 and maximum of 145), 86 FPS for High, and 58 FPS for Ultra. This shows a clear hierarchy where each step up in settings costs a significant number of frames. The jump from Low to Medium is a 16 FPS difference, while the jump from Medium to High is a 40 FPS difference, indicating that the High preset is much more demanding than Medium. The Ultra preset is another 28 FPS lower than High, making it the most demanding setting.

At 2560x1440, the average frame rates are 95 FPS for Low, 85 FPS for Medium (with a minimum of 72 and maximum of 98), 58 FPS for High, and 39 FPS for Ultra. The relative differences are similar to 1080p, but the absolute numbers are lower. The gap between Low and Medium is now only 10 FPS, while the gap between Medium and High is 27 FPS. This suggests that the GPU is becoming more of a limiting factor at this resolution, compressing the performance differences between the lower presets.

At 3840x2160, the average frame rates are 55 FPS for Low, 49 FPS for Medium (with a minimum of 41 and maximum of 56), 33 FPS for High, and 23 FPS for Ultra. At this resolution, the performance gap between Low and Medium is only 6 FPS, and the gap between Medium and High is 16 FPS. The data shows that the GPU is severely constrained at 4K, and even dropping to the Low preset cannot push the frame rate above 60 FPS. The difference between the highest and lowest settings at 4K is just 32 FPS, compared to an 84 FPS difference at 1080p, highlighting how the GPU bottleneck at 4K minimizes the impact of settings changes.

GPU Role

The AMD Radeon 8060S is the critical component for understanding this combo's gaming performance. Its specifications show a modern integrated GPU based on the RDNA 3.5 architecture, manufactured on a 4 nm process. It features 2560 shading units, 160 texture mapping units, and 64 render output units. The GPU operates at a base clock of 1295 MHz and a boost clock of 2900 MHz, which is a significant boost range that allows for high peak performance when thermals and power allow. Its theoretical performance is rated at 14.85 TFLOPS for FP32 operations.

The memory configuration is unique, as it uses "System Shared" memory, meaning it relies on the system's LPDDR5X memory rather than dedicated VRAM. The memory bandwidth is listed as "System Dependent," which means it is tied to the CPU's memory bus. For the Ryzen AI Max+ 395, this is a quad-channel memory bus with a bandwidth of 256.0 GB/s. This shared memory architecture is a common design for integrated GPUs and can be a bottleneck in some scenarios, but the high bandwidth provided by the quad-channel setup helps mitigate this.

In Archeage, the GPU's role is clearly the primary determinant of frame rate at higher resolutions. The benchmark results show that the GPU is in the 87th percentile of all GPUs, with an average score of 55757. Its nearest rival, the AMD Radeon RX 6750 GRE 12 GB, is essentially tied with it (0.1% difference). This indicates that the 8060S is a high-performing integrated GPU that can compete with some discrete desktop cards. However, the measured FPS in Archeage shows that it struggles to maintain high frame rates at 4K, suggesting that the game's rendering demands are high, and the shared memory bandwidth or the GPU's raw compute power becomes a limiting factor. The data implies that for 1080p and 1440p gaming, the GPU is sufficient, but for 4K, it is the bottleneck.

CPU Role

The AMD Ryzen AI Max+ 395 is a high-end mobile processor that provides the foundation for this combo. It is built on the Zen 5 architecture (Strix Halo) using a 4 nm process and features 16 cores and 32 threads. It has a base clock of 3.00 GHz and a boost clock of 5.10 GHz, which are high figures for a mobile chip. The CPU has a substantial 64 MB of shared L3 cache, which is beneficial for gaming performance. Its memory support includes quad-channel LPDDR5X with a bandwidth of 256.0 GB/s, which is crucial for feeding the integrated GPU.

The CPU's benchmark data shows it is a very powerful processor. It scores 35314 in Cinebench R23 multicore and 2044 in single-core, placing it in the 95th percentile of all CPUs. Its average benchmark score is 77740, and its nearest rival, the Intel Core i9-14900K, is only 1.7% faster. This indicates that the Ryzen AI Max+ 395 has class-leading multi-threaded and single-threaded performance, which is more than sufficient for any modern game.

In Archeage, the CPU's role is less likely to be the primary bottleneck compared to the GPU. The game is a 2014 MMORPG, and while it can be CPU-intensive in crowded areas with many players, the high core count and fast single-thread performance of the 395 should be able to handle these scenarios effectively. The measured FPS data shows a clear GPU bottleneck at higher resolutions, as the frame rates drop consistently with increased pixel count. However, at 1080p with Low settings, the 142 FPS average suggests that the CPU is capable of feeding the GPU enough data to achieve very high frame rates. The CPU's 5.10 GHz boost clock and large L3 cache are likely key factors in maintaining high minimum frame rates (e.g., 107 FPS at 1080p Medium), preventing stutters in less demanding scenes. The data indicates that the CPU is not a limiting factor for this combo in Archeage, providing ample headroom for the GPU to be the deciding component.

FAQ

Q: What is the best resolution for this combo in Archeage?

A: The data shows that 1920x1080 is the best resolution for this combo. At 1080p, the system achieves an average of 142 FPS on Low settings and 86 FPS on High settings, indicating that it can provide a smooth experience across most presets. At 2560x1440, performance drops significantly, and at 3840x2160, even the Low preset only manages an average of 55 FPS.

Q: Can this combo run Archeage at 4K Ultra settings?

A: No, the measured data shows that at 3840x2160 with Ultra settings, the combo achieves an average of only 23 FPS. This is below the standard for playable frame rates. The High preset at 4K also struggles with an average of 33 FPS. For 4K, the Low preset is the only viable option, with an average of 55 FPS.

Q: How does the Radeon 8060S compare to its nearest rivals in benchmark scores?

A: The Radeon 8060S has an average benchmark score of 55757. Its closest rival, the AMD Radeon RX 6750 GRE 12 GB, is only 0.1% faster, while the NVIDIA GeForce RTX 5080 is 0.6% faster. This places the 8060S in the 87th percentile of all GPUs, indicating it is a high-performing integrated part.

Q: What is the impact of changing settings from Low to Ultra at 1080p?

A: At 1920x1080, the average frame rate drops from 142 FPS on Low to 58 FPS on Ultra. This is a 84 FPS reduction, or about a 59% decrease. The most significant drop occurs between Medium (126 FPS) and High (86 FPS), which is a 40 FPS difference.

Q: Is the CPU or GPU the primary bottleneck in this system?

A: The data indicates that the GPU is the primary bottleneck, especially at higher resolutions. The frame rate drops consistently as resolution increases (e.g., from 142 FPS at 1080p Low to 55 FPS at 4K Low), which is a classic sign of a GPU limitation. The CPU, with its high benchmark scores, is not expected to be the limiting factor in this game.

Q: What is the combo's overall rank among all tested configurations for Archeage?

A: The combo ranks 1603rd out of 2761 tested combinations for Archeage. This places it in a mid-pack position, suggesting that while it is capable, many other CPU-GPU pairings deliver higher frame rates in this specific game.