Roblox

The AMD Ryzen 9 5950X paired with the NVIDIA GeForce GTX 1070 ranks 1506th out of 1800 tested combinations for Roblox. This places the combo in the lower tier of the database, roughly in the 16th percentile of all tested systems. The ranking reflects a significant mismatch between the two components: the CPU is a top-tier desktop processor while the GPU is a previous-generation mid-range card. The data suggests that in Roblox, the GPU is the primary constraint, preventing the system from achieving the high frame rates the CPU could otherwise support.

How This Combo Ranks

The combo rank of 1506 out of 1800 shows this pairing falls well below the median tested configuration. This is not a reflection of poor hardware per se, but rather of imbalance. The CPU’s average benchmark score of 49,062 places it in the 93rd percentile of all CPUs, while the GPU’s average score of 12,331 sits at the 51st percentile of all GPUs. The gap is stark. In Roblox, which can be sensitive to both CPU and GPU load, the lower-performing component dictates the experience. The ranking indicates that many other combos, likely with more balanced pairings, achieve better results in this specific title. The system’s position is more indicative of the GPU’s limitations than any deficiency in the processor.

GPU Role

The NVIDIA GeForce GTX 1070 is built on the Pascal architecture and features 8 GB of GDDR5 memory on a 256-bit bus, delivering a bandwidth of 256.3 GB/s. Its base clock is 1506 MHz with a boost clock of 1683 MHz. The GPU has 1,920 shading units, 120 texture mapping units, and 64 raster output units. These specifications place it in the 51st percentile of all GPUs, meaning it performs better than just over half of the tested graphics cards. Its nearest rivals include the NVIDIA Quadro K4200 (0.7% slower), the GeForce GTX 880M (1.3% faster), and the GeForce GTX 1650 SUPER (1.4% faster). In Roblox, the GPU’s role is critical at higher resolutions and settings. The data shows a clear pattern: as resolution increases, frame rates drop substantially, indicating the GPU is the limiting factor. The card’s 8 GB VRAM is sufficient for Roblox, but its raw processing power is what holds back performance in this pairing.

Resolution Scaling

The measured frame rates reveal how the system scales across resolutions. At 1080p with Low settings, the system achieves 250.3 FPS. Moving to 1440p Low, it drops to 167.7 FPS, a reduction of 33%. At 4K Low, the average falls to 97.6 FPS, a further 42% drop from 1440p. The same pattern holds across all settings presets. For High settings, the system delivers 203.4 FPS at 1080p, 136.1 FPS at 1440p, and 74.9 FPS at 4K. The scaling from 1080p to 4K at High settings shows a 63% reduction in frame rate. This steep decline indicates that the GTX 1070 is heavily taxed by the increase in pixel count. The CPU, with its 16 cores and 32 threads, is not the bottleneck here; the GPU’s rendering capabilities are. At 1080p, the system is likely CPU-bound in some scenarios, but by 4K, the GPU is clearly the limiting component.

FAQ

Q: What is the best resolution for this combo in Roblox?

A: Based on the measured data, 1080p provides the highest frame rates across all settings, ranging from 163 FPS at Ultra to 250.3 FPS at Low. 1440p is still playable, with a low of 112.2 FPS at Ultra and a high of 167.7 FPS at Low. 4K is the most demanding, with frame rates dropping to 60.6 FPS at Ultra.

Q: How does the Ryzen 9 5950X compare to its nearest rivals?

A: The Ryzen 9 5950X has an average benchmark score of 49,062. It is 0.2% slower than the Intel Core i5-14600K (score 49,166) and 0.6% slower than the Intel Core i5-14600KF (score 49,367). It is 0.7% faster than the Intel Xeon Gold 5318H (score 48,698) and 1.1% faster than the AMD EPYC 4345P (score 49,595).

Q: What is the GPU’s percentile ranking?

A: The NVIDIA GeForce GTX 1070 is in the 51st percentile of all tested GPUs. Its average benchmark score is 12,331, placing it slightly above the midpoint of the database.

Q: Which settings preset gives the highest frame rate at 1440p?

A: At 2560x1440, the Low preset yields the highest average frame rate at 167.7 FPS, followed by Medium at 156 FPS, High at 136.1 FPS, and Ultra at 112.2 FPS.

Q: Is the CPU or GPU more responsible for the performance in Roblox?

A: The data indicates the GPU is the limiting factor. The CPU is a high-end processor, but frame rates drop significantly as resolution increases, which is a classic sign of GPU limitation. The GTX 1070’s 51st percentile ranking contrasts sharply with the CPU’s 93rd percentile ranking.

Q: What are the clock speeds of the GTX 1070?

A: The GTX 1070 has a base clock of 1506 MHz and a boost clock of 1683 MHz. The memory operates at 2002 MHz, or 8 Gbps effective.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture (Vermeer). It has a base clock of 3.40 GHz and a boost clock of 4.90 GHz, with a 64 MB L3 cache. The CPU’s benchmark results are strong: it scores 38,607 in Cinebench R23 multi-core and 5,450 in single-core. In PassMark, it achieves 45,424 in multi-thread and 3,470 in single-thread tests. This performance places it in the 93rd percentile of all CPUs. Despite this, the combo’s ranking in Roblox is low. This is because Roblox, at the resolutions tested, does not fully utilize the CPU’s capabilities. The processor is capable of far more than the GPU can deliver. The 5950X’s nearest rivals, such as the Intel Core i5-14600K (0.2% faster) and the AMD EPYC 4345P (1.1% slower), show that the CPU itself is not a weak link. The bottleneck lies elsewhere, and the frame rate data confirms that the GPU is what holds this system back in Roblox.

Settings Recommendations

The measured frame rates provide a clear guide for optimal settings. At 1080p, all presets are playable, with even Ultra delivering 163 FPS. For maximum smoothness, Low settings provide 250.3 FPS, but Medium at 229.5 FPS offers a good balance between visual quality and speed. For 1440p, the system remains capable. Low settings give 167.7 FPS, while Medium drops to 156 FPS. High settings still provide 136.1 FPS, which is above the 120 FPS threshold for many displays. Ultra at 1440p yields 112.2 FPS, which is acceptable but shows the GPU’s strain. At 4K, the situation changes. Low settings produce 97.6 FPS, Medium 88.1 FPS, High 74.9 FPS, and Ultra drops to 60.6 FPS. For a consistent experience at 4K, Low or Medium settings are recommended. The data suggests that the best experience is at 1080p with High settings, which delivers 203.4 FPS and maintains visual fidelity without sacrificing performance. The system is best suited for 1080p or 1440p gaming, where it can keep frame rates high. At 4K, the GTX 1070 becomes the clear limiting factor, and users should expect to lower settings to maintain playable frame rates.