Barony
This combination provides smooth gameplay with an average of 109 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 50 | 58 | 78 |
| 1440p QHD | 68 | 95 | 110 | 149 |
| 1080p Full HD | 108 | 150 | 175 | 235 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 9 5950X + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 9 5950X paired with the NVIDIA GeForce GTX 1070 is a study in contrast: a 16-core, 32-thread enthusiast processor from 2020 working alongside an 8 GB Pascal-era graphics card from 2016. In Barony, a roguelike that is far from the most demanding modern release, this combination produces surprisingly playable results across most settings, but the data reveals a clear bottleneck that shifts depending on resolution and preset.
CPU Role — cores, clocks, and how they relate to this game's results
The Ryzen 9 5950X is built on the Zen 3 architecture (Vermeer codename) using a 7 nm process from TSMC, with 16 cores and 32 threads. Its base clock sits at 3.40 GHz, boosting up to 4.90 GHz, and it carries 64 MB of L3 cache plus 512 KB of L2 per core. In synthetic benchmarks, this chip is a monster: it scores 26,017 in Cinebench R23 multi-core and 1,614 in single-core, with a Geekbench multi-core score of 15,233 and single-core of 2,083. Its PassMark multithread score of 45,424 and single-thread score of 3,470 place it in the 91st percentile among all CPUs.
For Barony, the CPU's raw strength is largely wasted at lower resolutions. At 1080p Low, the combo hits 235 FPS average, which is so high that the frame rate is likely limited by the game engine or the GPU's ability to feed frames, not by the 5950X. The processor's single-thread performance, evidenced by a 944 score in 3DMark single-thread and 266.5 in Cinebench R15 single-core, ensures that even the most demanding simulation ticks in a roguelike won't cause hitches. The 5950X's 32 threads are overkill for Barony, which is not a highly threaded title, but the high boost clock of 4.90 GHz means that the few threads it does use will run at maximum speed.
The data shows that the CPU is never the primary limiter in this pairing. Even at 4K Ultra, where the average FPS drops to 36, the bottleneck is clearly the GPU (as discussed later). The 5950X's nearest rivals in overall benchmark scores include the Intel Core Ultra 5 235HX (deltaPct -0.2), the AMD EPYC 8124P (deltaPct -0.3), and the Intel Core i9-13900F (deltaPct 0.4). The 5950X sits right in that pack, meaning it offers comparable compute power to those parts. For Barony, any of these CPUs would deliver essentially identical frame rates; the game simply does not stress a 16-core processor. The 5950X's 8,300 million transistors and 2x 74 mm² die size are irrelevant to the gameplay experience here, but they do explain why this chip costs $799 at launch MSRP.
Settings Recommendations — which preset gives the best experience per the measured rows
Looking at the measured FPS rows, the sweet spot for this combo at 1080p is the High preset. At 1920x1080 High, the average FPS is 150, which is well above the 144 Hz refresh rate that many monitors offer. Dropping to Medium yields 175 FPS average, but that only matters if you have a 165 Hz or 240 Hz display. The Low preset at 1080p hits 235 FPS, which is excessive for most users and likely introduces diminishing returns in visual quality. The Ultra preset at 1080p drops to 108 FPS, which is still playable but starts to show the GPU struggling.
At 1440p, the recommendation shifts. The High preset delivers 95 FPS average, which is smooth for most gaming. Medium is 110 FPS, and Low is 149 FPS. Ultra drops to 68 FPS, which is borderline for fast-paced action but acceptable for a roguelike. The Medium preset at 1440p offers the best balance: 110 FPS average with a minimum of 94 FPS and maximum of 127 FPS, according to the measured rows. That minimum frame rate is important; it shows that the experience stays fluid even during busy scenes.
At 4K, the picture changes dramatically. The High preset yields only 50 FPS average, and Ultra falls to 36 FPS. The Low preset at 4K produces 78 FPS, which is playable but sacrifices visual fidelity. For 4K, the Medium preset is the most viable option: 58 FPS average with a minimum of 49 FPS and maximum of 66 FPS. That 49 FPS minimum is close to the edge of comfort, but for a turn-based roguelike, it's tolerable. The data suggests that if you want to play at 4K with this combo, you should stick to Medium or Low, as High and Ultra push the GPU too hard.
The overall best experience per the measured rows is 1080p High at 150 FPS average. It provides a smooth, visually pleasing experience without the frame rate volatility seen at lower presets. The 175 FPS at Medium and 235 FPS at Low are technically higher, but the visual improvements from High are worth the slight frame rate sacrifice, especially since 150 FPS is already beyond what most displays can show.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The FPS scaling across resolutions tells a clear story about where the bottleneck lies. At 1080p High, the average is 150 FPS. Moving to 1440p High, it drops to 95 FPS, a 37% reduction. Going to 4K High, it falls to 50 FPS, a 67% reduction from 1080p. This steep decline as resolution increases is the classic signature of a GPU-bound scenario. If the CPU were the limiting factor, the FPS would stay roughly flat across resolutions, since the CPU workload doesn't change much with resolution. Instead, the GTX 1070's pixel throughput is being taxed harder at each step up.
Looking at the Low preset, the scaling is even more telling: 1080p Low averages 235 FPS, 1440p Low averages 149 FPS, and 4K Low averages 78 FPS. The drop from 1080p to 1440p is 37%, and from 1080p to 4K is 67%. These percentages are nearly identical to the High preset, which indicates that the GPU is the limiting factor even at Low settings. If the CPU were holding things back, we'd expect the FPS to plateau at some point, but it doesn't.
The Medium preset data includes minimum and maximum FPS, which adds nuance. At 1080p Medium, the average is 175 FPS with a minimum of 149 and maximum of 201. At 1440p Medium, the average drops to 110 FPS with a minimum of 94 and maximum of 127. At 4K Medium, the average is 58 FPS with a minimum of 49 and maximum of 66. The minimum FPS at 4K Medium (49) is less than half of the minimum at 1080p Medium (149), further confirming that the GPU is struggling to maintain frame times at higher resolutions.
The GTX 1070 has 1920 shading units, 120 texture mapping units, and 64 ROPs, with a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s. Its FP32 performance is 6.463 TFLOPS. These specs are modest by modern standards, and the data shows that the GPU is maxed out well before the 5950X breaks a sweat. The 5950X's PassMark physics score of 1,878 and data compression score of 624,347 suggest it has plenty of headroom for any game logic, but Barony's frame rate is dictated by the graphics card at every resolution above 1080p Low.
How This Combo Ranks — use comboRankInGame vs other tested combos
This specific combination of the Ryzen 9 5950X and GTX 1070 ranks 3,063 out of 3,717 tested combos in Barony. That places it in the bottom 18% of all tested systems, which might seem surprising given the frame rates we've seen. However, this ranking is relative to all combos in the database, which includes systems with far more modern and powerful graphics cards.
The low rank is primarily due to the GTX 1070's age. The GPU has a percentile rank of 47 among all GPUs, meaning it sits near the median of all tested graphics cards. Its average benchmark score is 9,780, and its nearest rivals include the AMD FirePro W5000 (deltaPct -0.2), NVIDIA Quadro M2000M (deltaPct -0.5), NVIDIA Tesla M10 (deltaPct 0.6), and NVIDIA Tesla C2070 (deltaPct 0.7). These are all older or workstation-oriented cards, putting the GTX 1070 in a decidedly mid-range position.
Meanwhile, the CPU is in the 91st percentile among all processors, with an average benchmark score of 51,947. Its nearest rivals are the Intel Core Ultra 5 235HX (deltaPct -0.2), AMD EPYC 8124P (deltaPct -0.3), Intel Core i9-13900F (deltaPct 0.4), and Intel Core i7-14700 (deltaPct -0.7). The 5950X is clearly a top-tier processor, but it's paired with a mid-tier GPU, which drags the combo rank down.
In Barony specifically, the combo rank of 3,063 out of 3,717 means that most other tested systems perform better. This is expected, as the GTX 1070 is a 2016-era card with 8 GB of GDDR5 memory on a 256-bit bus, providing 256.3 GB/s of bandwidth. The card's base clock is 1506 MHz with a boost of 1683 MHz, and its memory runs at 2002 MHz (8 Gbps effective). These specs are adequate for 1080p gaming, but they don't hold up well in a ranking that includes modern GPUs with much higher throughput.
The takeaway is that this combo is CPU-heavy, and the ranking reflects that imbalance. If you were to swap the GTX 1070 for a more powerful GPU, the combo rank would improve dramatically, as the 5950X has plenty of headroom to feed a faster card.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce GTX 1070 is built on the Pascal architecture (GP104 chip) using a 16 nm process from TSMC. It has 7,200 million transistors on a 314 mm² die, with a transistor density of 22.9M per mm². The card features 8 GB of GDDR5 memory on a 256-bit bus, delivering 256.3 GB/s of bandwidth. Its base clock is 1506 MHz with a boost clock of 1683 MHz, and memory runs at 2002 MHz (8 Gbps effective). The GPU has 1920 shading units, 120 TMUs, and 64 ROPs, with a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s. FP32 performance is 6.463 TFLOPS, and FP16 is 101.0 GFLOPS (1:64).
In Barony, the GTX 1070 is the primary determinant of frame rate at higher resolutions. At 1080p, it's capable of delivering 150 FPS on High and 108 FPS on Ultra, which are respectable numbers. The card's 8 GB of VRAM is sufficient for Barony's textures, even at 4K, since the game is not particularly VRAM-hungry. However, the GPU's raw compute power is what limits performance at 4K, where Ultra settings only manage 36 FPS average.
The GPU's benchmark scores reflect its mid-range status. Its PassMark G3D score is 13,498, and its PassMark GPU Compute score is 6,102. In DirectX tests, it scores 82 in DX10, 100 in DX11, 48 in DX12, and 197 in DX9. Its Geekbench scores include 18,801 in Metal, 44,700 in OpenCL, and 22,121 in Vulkan. The card's percentile rank of 47 among all GPUs means it's right at the median, which is consistent with its performance in Barony.
The GTX 1070's power draw is rated at 150 W TDP, with a suggested PSU of 450 W. It requires a single 8-pin power connector and occupies a dual-slot design. The card measures 267 mm in length, 112 mm in height, and 40 mm in width. It supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4, with display outputs of 1x DVI, 1x HDMI 2.0, and 3x DisplayPort 1.4a. Its launch MSRP was 379 USD, but the card is now end-of-life, having been succeeded by the GeForce 20 series.
In practical terms, the GTX 1070 is the reason why this combo ranks so low. The data shows that at 4K, the GPU cannot maintain 60 FPS on any preset, maxing out at 78 FPS on Low. At 1080p, it's more than adequate, but the 5950X is capable of much more. If you're using this combo, the GPU is what you'd upgrade first to improve Barony performance.
FAQ
Q: Can this combo run Barony at 1080p with high settings?
A: Yes. At 1920x1080 High, the average FPS is 150, which is smooth and well above the 60 FPS threshold. Even at Ultra, it maintains 108 FPS average.
Q: What is the best settings preset for 4K gaming with this combo?
A: The Medium preset at 3840x2160 delivers 58 FPS average with a minimum of 49 FPS. Low gives 78 FPS, but High drops to 50 FPS and Ultra to 36 FPS. Medium is the most balanced for 4K.
Q: Is the CPU or GPU the bottleneck in Barony?
A: The GPU is the bottleneck at all resolutions above 1080p Low. The FPS drops significantly as resolution increases (from 235 FPS at 1080p Low to 78 FPS at 4K Low), which indicates the GTX 1070 is the limiting component.
Q: How does this combo rank compared to other tested systems?
A: This combo ranks 3,063 out of 3,717 tested combos in Barony. The low rank is primarily due to the GTX 1070, which sits in the 47th percentile among GPUs, while the 5950X is in the 91st percentile among CPUs.
Q: What are the nearest rivals to the GTX 1070 in benchmark scores?
A: The GTX 1070's nearest rivals are the AMD FirePro W5000 (deltaPct -0.2), NVIDIA Quadro M2000M (deltaPct -0.5), NVIDIA Tesla M10 (deltaPct 0.6), and NVIDIA Tesla C2070 (deltaPct 0.7). These are all similar in average benchmark score.
Q: Does the Ryzen 9 5950X's 16 cores help in Barony?
A: Not significantly. Barony is not a highly threaded game, and the CPU's single-thread performance (1,614 in Cinebench R23 single-core) is what matters. The 32 threads are largely unused, but the high boost clock of 4.90 GHz ensures smooth performance.
Hardware Specifications
AMD Ryzen 9 5950X
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 5950X + NVIDIA GeForce GTX 1070 in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 78.0 |
| 3840x2160 | Medium | 58.0 |
| 3840x2160 | High | 50.0 |
| 3840x2160 | Ultra | 36.0 |
| 2560x1440 | Low | 149.0 |
| 2560x1440 | Medium | 110.0 |
| 2560x1440 | High | 95.0 |
| 2560x1440 | Ultra | 68.0 |
| 1920x1080 | Low | 235.0 |
| 1920x1080 | Medium | 175.0 |
| 1920x1080 | High | 150.0 |
| 1920x1080 | Ultra | 108.0 |
Barony with GTX 1070 + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 9 5950X + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.