Roblox

Roblox, a sandbox title from 2006, remains one of the most widely played games, and the data shows that the AMD Ryzen 5 9600X paired with the NVIDIA GeForce RTX 5060 delivers exceptional performance across all tested configurations. The benchmark results indicate that this combination ranks 858th out of 1800 tested combos for this game, placing it in the upper half of all systems. The measured FPS data reveals that the system is capable of delivering fluid frame rates even at the highest resolution and settings, though the scaling patterns highlight a strong dependency on the graphics processor at 4K.

FAQ

Q: What is the average FPS at 1080p with Ultra settings?

A: The measured average FPS at 1920x1080 with Ultra settings is 253.7. This is the lowest frame rate recorded at this resolution, indicating that the Ultra preset imposes a significant load on the system, yet it remains well above the threshold for smooth gameplay.

Q: How does the CPU's multi-threaded performance compare to its nearest rival?

A: The AMD Ryzen 5 9600X has an average benchmark score of 28246, which is a 0.3% difference from the Intel Core i5-13490F and the AMD Ryzen 5 230. The data shows it sits slightly behind the AMD Ryzen 7 8845HS and Intel Core i5-14500T, with deltaPct values of -0.4% and -0.5% respectively.

Q: What is the GPU's average benchmark score and its percentile ranking?

A: The NVIDIA GeForce RTX 5060 achieves an average benchmark score of 30109, placing it in the 73rd percentile among all GPUs. This score is nearly identical to the AMD Radeon RX 7700 XT, which has a deltaPct of 0%, and it is slightly ahead of the NVIDIA Tesla M60 and GeForce RTX 5070 Mobile by 0.5% and 0.6% respectively.

Q: Is there a significant FPS drop when moving from 1440p to 4K on High settings?

A: Yes, the data shows a substantial drop. At 2560x1440 with High settings, the average FPS is 208.5, which falls to 117.9 at 3840x2160 with the same settings. This represents a decrease of approximately 90 FPS, indicating that the GPU becomes the primary limiting factor at 4K.

Q: What is the highest average FPS recorded in the entire dataset?

A: The highest average FPS is 386, achieved at 1920x1080 resolution with Low settings. This is followed closely by 354 FPS at the same resolution with Medium settings, showing that lower graphics presets allow the CPU to push frame rates to their maximum potential at 1080p.

Q: Does the GPU's memory bandwidth support high-resolution gaming?

A: The GPU features 8 GB of GDDR7 memory on a 128-bit bus, providing a bandwidth of 448.0 GB/s. The measured results at 4K, which show an average of 117.9 FPS on High settings, indicate that this memory configuration is sufficient for the demands of Roblox at that resolution.

GPU Role

The NVIDIA GeForce RTX 5060 is built on the Blackwell 2.0 architecture and features 8 GB of GDDR7 memory with a 128-bit bus width, providing a memory bandwidth of 448.0 GB/s. The GPU operates at a base clock of 2280 MHz and a boost clock of 2497 MHz, with a memory clock of 1750 MHz, which translates to 28 Gbps effective. With 3840 shading units, 120 texture mapping units, and 48 render output units, the card is engineered for high-throughput rendering. The data shows that the GPU's performance, as measured by its average benchmark score of 30109, places it in the 73rd percentile, with its nearest rival being the AMD Radeon RX 7700 XT at a deltaPct of 0%.

In the context of Roblox, the GPU's role becomes evident when examining the FPS scaling with settings. At 1080p with Low settings, the system achieves 386 FPS, but this drops to 253.7 FPS at Ultra settings. This 132.3 FPS difference demonstrates how the GPU's shading and texture units are taxed by higher graphical fidelity. The 8 GB VRAM capacity is not a limiting factor at these settings, as the game's asset requirements are moderate. The GPU's FP32 performance of 19.18 TFLOPS provides ample compute capacity, and the benchmark results indicate that the card is well-matched to the CPU, as the frame rates remain high even at 4K, suggesting that the GPU is capable of maintaining a consistent workload.

The RTX 5060's memory bandwidth of 448.0 GB/s is a critical specification for high-resolution gaming. At 4K, the pixel throughput demand increases significantly, and the data shows that the system still manages an average of 93.4 FPS on Ultra settings. This suggests that the memory subsystem is not a bottleneck, and the GPU's 48 ROPs are sufficient to handle the pixel fill rate requirements of the game at this resolution. The GPU's power envelope, with a TDP of 145 W, is modest, and the benchmark results indicate that this does not hamper performance in this title.

Resolution Scaling

The measured FPS data reveals a clear pattern of performance degradation as resolution increases, which is characteristic of a GPU-bound workload. At 1920x1080, the system achieves frame rates ranging from 253.7 FPS on Ultra to 386 FPS on Low. Moving to 2560x1440, the average FPS drops to 168.6 on Ultra and 259.6 on Low. At 3840x2160, the frame rates fall further to 93.4 on Ultra and 144.4 on Low. This scaling indicates that the GPU is the limiting component at higher resolutions, as the CPU's performance, with a boost clock of 5.40 GHz, is sufficient to feed the graphics card at lower resolutions but cannot compensate for the increased pixel workload at 4K.

The percentage drop from 1080p to 4K is substantial. On Low settings, the average FPS decreases from 386 to 144.4, which is a reduction of approximately 62.6%. On High settings, the drop is from 312.9 to 117.9, a reduction of about 62.3%. This consistent scaling across settings suggests that the GPU's compute and memory resources are being saturated at 4K. The data shows that the RTX 5060's 8 GB of VRAM and 448.0 GB/s bandwidth are being utilized effectively, but the sheer number of pixels at 3840x2160 overwhelms the GPU's capabilities relative to lower resolutions.

Interestingly, the gap between Low and Ultra settings narrows at higher resolutions. At 1080p, the difference between Low and Ultra is 132.3 FPS, while at 1440p it is 91 FPS, and at 4K it is 51 FPS. This trend indicates that at 4K, the GPU is so heavily loaded that the settings-based differences in rendering complexity become less impactful on the overall frame rate. The limiting component at 4K is unequivocally the GPU, as even the most demanding preset, Ultra, yields a playable 93.4 FPS, but the headroom for higher frame rates is constrained by the graphics card's raw throughput.

Settings Recommendations

Based on the measured FPS data, the optimal balance between visual fidelity and performance is achieved at 2560x1440 with High settings. At this configuration, the system delivers an average FPS of 208.5, which is well above the threshold for smooth gameplay and provides a significant improvement in visual quality over Low settings. The data shows that Ultra settings at this resolution yield 168.6 FPS, which is still excellent, but the marginal visual gain may not justify the 39.9 FPS reduction compared to High.

For users prioritizing maximum frame rates, the 1920x1080 resolution with Low settings provides the highest measured average of 386 FPS. This configuration is ideal for competitive play where response time is paramount. However, the data indicates that Medium settings at 1080p offer a better visual experience with only a modest FPS reduction to 354, making it a strong recommendation for those seeking a balance. At 4K, the High settings preset delivers 117.9 FPS, which is playable, but the Ultra preset drops to 93.4 FPS, suggesting that High is the most sensible choice for 4K gaming to maintain a comfortable frame rate margin.

The benchmark results indicate that the system is never truly constrained at 1080p or 1440p, as even the most demanding settings produce frame rates above 168 FPS. Therefore, the recommendation is to prioritize visual quality at these resolutions. At 4K, the GPU becomes the bottleneck, and the data suggests that High settings provide the best experience, as the drop to Ultra results in a 24.5 FPS loss, which may be perceptible. The measured data supports the conclusion that the RTX 5060 is best utilized with High settings at 4K or Ultra settings at 1440p for an optimal experience.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its peak performance capabilities. The Low settings preset yields an average FPS of 386, which is the highest recorded in the dataset. The Medium preset follows closely with 354 FPS, while High settings produce 312.9 FPS. The Ultra preset, which imposes the most demanding graphical load, still achieves an impressive 253.7 FPS. This data indicates that at 1080p, the CPU and GPU combination is capable of delivering frame rates that far exceed the refresh rate of most monitors, and the system is primarily limited by the settings' impact on the GPU's workload.

Moving to 2560x1440, the frame rates remain exceptionally high, though the scaling shows a clear dependency on the graphics settings. The Low preset averages 259.6 FPS, while Medium achieves 231.9 FPS. High settings deliver 208.5 FPS, and Ultra settings produce 168.6 FPS. The difference between Low and Ultra at this resolution is 91 FPS, which highlights the significant impact of the graphical presets on performance. Despite this, all settings at 1440p provide an average FPS above 168, ensuring a smooth experience even in graphically intense scenes.

At 3840x2160, the system's performance is more moderate, reflecting the increased pixel rendering demands. The Low settings preset reaches an average of 144.4 FPS, while Medium achieves 133.5 FPS. High settings deliver 117.9 FPS, and Ultra settings drop to 93.4 FPS. The data reveals that at 4K, the frame rate difference between Low and Ultra is 51 FPS, which is the smallest margin across all resolutions. This indicates that the GPU is the primary limiting factor at this resolution, and the settings have a reduced relative impact on performance compared to lower resolutions. The overall dataset confirms that the combo is highly capable of running Roblox at high frame rates across all tested configurations, with the primary trade-off being between visual quality and resolution.