Roblox

Roblox

AVERAGE FPS
272
excellent

This combination delivers exceptional performance with an average of 272 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 117 144 163 179
1440p QHD 206 254 288 316
1080p Full HD 309 381 431 474

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 179
3840x2160 Medium 163
3840x2160 High 144
3840x2160 Ultra 117
2560x1440 Low 316
2560x1440 Medium 288
2560x1440 High 254
2560x1440 Ultra 206
1920x1080 Low 474
1920x1080 Medium 431
1920x1080 High 381
1920x1080 Ultra 309

Roblox with AMD Ryzen 5 4600G + AMD Radeon RX 9070, In-Depth Analysis

Roblox with the AMD Ryzen 5 4600G and AMD Radeon RX 9070 produces a dataset that is almost entirely GPU-bound at lower resolutions, but the frame rate scaling from 1080p to 4K reveals a clear transition point. At 1920x1080 with Medium settings, the combo delivers an average of 431 FPS, which drops to 288 FPS at 2560x1440 and further to 163 FPS at 3840x2160. That represents a 33% reduction moving from 1080p to 1440p, and a 62% reduction from 1080p to 4K. The 4K result, while still high in absolute terms, shows the GPU beginning to hit its stride as the primary limiter, whereas at 1080p the frame rates are so elevated that they suggest the CPU or engine-level bottlenecks are capping performance well before the GPU's potential is exhausted.

The gap between Low and Ultra settings widens as resolution increases, which is characteristic of a system where the GPU becomes more dominant at higher pixel counts. At 1080p, the spread from Low (474 FPS) to Ultra (309 FPS) is 165 FPS, while at 4K the same spread narrows to 62 FPS (179 FPS Low versus 117 FPS Ultra). This compression at 4K indicates that the rendering workload at that resolution is saturating the GPU to a degree where settings adjustments have less relative impact on the final frame rate. The data shows that at 1080p, even the highest preset keeps the average above 300 FPS, which is far beyond typical display refresh rates, making the CPU and engine the more interesting subjects of analysis at that resolution.

Resolution Scaling

The measured FPS data across the three resolutions paints a picture of a system that is wildly over-provisioned for Roblox's typical visual demands, yet the scaling behavior is instructive. At 1920x1080, the Medium preset yields 431 FPS average, and the Low preset reaches 474 FPS. These numbers are so high that they exceed the refresh rate of virtually any consumer monitor, meaning the practical experience at 1080p is limited by the display rather than the hardware. The drop to 2560x1440 shows a substantial reduction, with Medium falling to 288 FPS, a 33% decrease. This is a significant scaling factor, but the absolute numbers remain far above playable thresholds.

Moving to 3840x2160, the Medium preset produces 163 FPS, which is still exceptionally smooth, but the scaling from 1440p to 4K is a 43% reduction. The Low preset at 4K manages 179 FPS, while Ultra drops to 117 FPS. The fact that the 4K Ultra result still exceeds 100 FPS indicates that the RX 9070 is handling the resolution increase admirably, but the diminishing returns of lowering settings at 4K suggest that the GPU is becoming the bottleneck. At 1080p, the difference between Low and Medium is only 43 FPS, but at 4K that same difference is 16 FPS, showing a compression in performance headroom as pixel count rises. This pattern is classic for a GPU that is underutilized at lower resolutions due to CPU or engine limits, but begins to stretch its legs at 4K where the pixel shading workload becomes the dominant factor.

The min FPS data, available only for Medium settings, provides additional insight into frame pacing. At 1080p Medium, the min FPS is 367, which is 85% of the average, indicating consistent frame delivery. At 1440p Medium, the min FPS is 245, which is 85% of the 288 average, showing similar consistency. At 4K Medium, the min FPS is 138, which is 85% of the 163 average, maintaining the same ratio. This consistency across resolutions suggests that the frame time distribution remains stable, and the system is not experiencing severe stutters or hitches, even as the GPU load increases.

GPU Role

The AMD Radeon RX 9070 brings substantial specifications to this pairing, including 16 GB of GDDR6 memory on a 256-bit bus, yielding a memory bandwidth of 644.6 GB/s. The GPU's boost clock is rated at 2520 MHz, with a game clock of 2070 MHz, and it operates on the RDNA 4.0 architecture built on a 4 nm process. These specifications translate into a Passmark G3D score of 25381, placing the GPU in the 69th percentile of all GPUs. The nearest rivals in the benchmark database include the NVIDIA GeForce GTX TITAN Z, which scores 23736 (0.6% lower), and the AMD Radeon RX 6800S, which scores 24063 (0.8% higher), indicating that the RX 9070 sits in a competitive mid-to-high range segment.

In Roblox specifically, the GPU's role becomes more pronounced at higher resolutions. The 4K results, where the GPU is the primary limiter, show that the RX 9070 can sustain 117 FPS on Ultra settings, which is a demanding workload for a sandbox game with potentially complex scenes. The 16 GB VRAM capacity is ample for Roblox's texture and asset requirements, and the bandwidth of 644.6 GB/s ensures that memory throughput is unlikely to be a bottleneck at any tested settings. The GPU's pixel rate of 322.6 GPixel/s and texture rate of 564.5 GTexel/s provide the raw throughput necessary to maintain high frame rates at 4K, as evidenced by the 179 FPS result on Low settings.

The benchmark results show that the GPU is not the limiting factor at 1080p, where the frame rates exceed 300 FPS even on Ultra. The Passmark DirectX 12 score of 74 is notably lower than the DirectX 11 score of 281, but Roblox's rendering engine likely utilizes features that don't stress the GPU's raw compute in a way that would show a bottleneck at lower resolutions. The GPU's compute score of 14737 in Passmark indicates strong general-purpose performance, but the game's workload at 1080p appears to be more constrained by the CPU's ability to feed draw calls and physics updates than by the GPU's shading capabilities.

CPU Role

The AMD Ryzen 5 4600G is a 6-core, 12-thread processor based on the Zen 2 architecture (Renoir codename), with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. It features 8 MB of shared L3 cache and supports dual-channel DDR4 memory with a bandwidth of 51.2 GB/s. The CPU's benchmark scores show a Passmark multithread score of 15992 and a single-thread score of 2653, placing it in the 71st percentile of all CPUs. Its nearest rivals include the AMD Ryzen 3 PRO 5355GE (0.1% higher) and the Intel Core 7 150U (0.6% lower), indicating that the 4600G is positioned in a dense cluster of similar-performing processors.

In Roblox, the CPU's role is most evident at 1080p where frame rates exceed 300 FPS. At this resolution, the GPU is not the bottleneck, so the CPU must handle the game's physics, scripting, and rendering commands. The 4600G's boost clock of 4.20 GHz provides adequate single-thread performance for Roblox's typically single-threaded engine, but the data suggests that the frame rates are capped by the CPU's ability to process the game logic. The fact that the 1080p Low preset achieves 474 FPS while the Ultra preset achieves 309 FPS indicates that the CPU can sustain very high frame rates, but the settings changes affect the GPU load enough to cause a 35% reduction in performance, suggesting that the CPU is still feeding the GPU effectively.

The 12 threads of the 4600G may be underutilized in Roblox, as the game typically doesn't scale well across many cores. The Cinebench R23 multicore score of 13593 shows strong multi-threaded performance, but this is unlikely to translate directly into Roblox frame rates. The single-core score of 1919 in Cinebench R23 is more relevant, as Roblox's main thread often becomes the limiting factor in high-FPS scenarios. The data shows that the CPU is able to push frame rates above 400 FPS at 1080p, which is impressive for a processor in the 71st percentile, but the scaling to 4K shows that the GPU eventually takes over as the primary constraint, allowing the CPU to become less relevant at higher pixel counts.

How This Combo Ranks

The combination of the Ryzen 5 4600G and the Radeon RX 9070 ranks 1122 out of 3711 tested combos in Roblox, placing it in the 70th percentile of all tested hardware pairs. This ranking is notably lower than the individual component percentiles might suggest, given that the GPU is in the 69th percentile and the CPU is in the 71st percentile. The discrepancy indicates that this specific pairing does not synergize as well as other combinations in Roblox, likely due to the CPU becoming a bottleneck at lower resolutions where the GPU's power is wasted.

The ranking suggests that while each component is capable on its own, the combination doesn't achieve the top-tier performance that a higher-end CPU might unlock with the RX 9070. The data shows that at 1080p, the frame rates are so high that they exceed typical display capabilities, but the CPU's single-thread performance may prevent the GPU from being fully utilized at those resolutions. At 4K, the GPU becomes the limiting factor, and the CPU's performance is sufficient to keep up, but the overall ranking is dragged down by the 1080p results where the CPU holds back the system.

Compared to other combos in the database, this pairing sits in the upper-middle range, indicating that it delivers solid performance but isn't at the extreme top tier. The 4K results, where the combo achieves 144 FPS on High settings, are respectable and would provide a smooth experience on a 4K display. The 1440p results are exceptionally strong, with the High preset hitting 254 FPS, which would fully utilize a 240 Hz monitor. The ranking of 1122 out of 3711 suggests that there are many combinations that perform better, but also a significant majority that perform worse, placing this combo in a comfortable position for Roblox players seeking high refresh rates.

FAQ

Q: What is the average FPS at 1080p with Medium settings?

A: The average FPS at 1920x1080 with Medium settings is 431, with a minimum of 367 and a maximum of 496.

Q: How does the 4K Ultra performance compare to 1080p Low?

A: At 4K Ultra, the average FPS is 117, which is 75% lower than the 474 FPS achieved at 1080p Low, illustrating the significant impact of resolution and settings on the GPU workload.

Q: What is the CPU's single-thread performance relative to its nearest rival?

A: The Ryzen 5 4600G has a Passmark single-thread score of 2653, which is 0.1% higher than the AMD Ryzen 3 PRO 5355GE and 0.6% higher than the Intel Core 7 150U.

Q: What resolution and settings provide the highest average FPS in the dataset?

A: The highest average FPS is 474, achieved at 1920x1080 with Low settings, which is the least demanding configuration in the measured results.

Q: What is the GPU's memory bandwidth and how does it affect performance?

A: The RX 9070 has a memory bandwidth of 644.6 GB/s across a 256-bit bus with 16 GB of GDDR6 memory, which provides ample throughput for Roblox's assets, as evidenced by the high frame rates at 4K.

Q: How does the combo rank among all tested combinations in Roblox?

A: The combo ranks 1122 out of 3711 tested combos, placing it in the upper-middle range of all tested hardware pairs for this game.

Measured FPS Breakdown

The measured FPS data provides a comprehensive view of performance across three resolutions and four settings levels. At 1920x1080, the Low preset achieves an average of 474 FPS, which is the highest result in the entire dataset. The Medium preset at 1080p yields 431 FPS average, with a minimum of 367 and a maximum of 496. High settings at 1080p produce 381 FPS, and Ultra settings drop to 309 FPS. The progression from Low to Ultra at 1080p shows a 35% reduction in performance, indicating that the GPU is still able to handle the increased load without becoming a bottleneck, as even Ultra exceeds 300 FPS.

At 2560x1440, the performance scales down as expected. Low settings produce 316 FPS, which is 33% lower than the 1080p Low result. Medium settings at 1440p average 288 FPS, with a minimum of 245 and a maximum of 331. High settings yield 254 FPS, and Ultra settings drop to 206 FPS. The spread from Low to Ultra at 1440p is 110 FPS, which is a 35% reduction, similar to the 1080p scaling. This consistency suggests that the GPU is still not the limiting factor at 1440p, and the CPU can maintain high frame rates even with increased pixel count.

At 3840x2160, the GPU becomes the primary constraint. Low settings achieve 179 FPS, which is 43% lower than the 1440p Low result. Medium settings at 4K average 163 FPS, with a minimum of 138 and a maximum of 187. High settings produce 144 FPS, and Ultra settings drop to 117 FPS. The spread from Low to Ultra at 4K is 62 FPS, which is a 35% reduction, but the absolute numbers are lower, indicating that the GPU is now the limiting factor. The 4K results show that even Ultra settings maintain above 100 FPS, which is excellent for a sandbox game, and the scaling from 1440p to 4K is consistent across all settings, averaging a 43% reduction.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution and refresh rate. For 1080p displays, even Ultra settings provide 309 FPS, which far exceeds any consumer monitor's refresh rate. Players with a 144 Hz or 240 Hz monitor can comfortably use Ultra settings without any concern for frame rate drops, as the minimum FPS at Medium (367) is already well above 240 Hz. The data suggests that at 1080p, there is no reason to lower settings below High, as the difference between High and Ultra is only 72 FPS, and both are above 300 FPS.

For 1440p displays, the High preset at 254 FPS is sufficient for a 240 Hz monitor, while Ultra at 206 FPS still exceeds 144 Hz. Players with a 144 Hz monitor can use Ultra settings for the best visual quality, as the average FPS is 43% above the refresh rate. For those with a 240 Hz monitor, High settings provide a 6% headroom over the refresh rate, while Medium at 288 FPS offers a more comfortable 20% margin. The Medium preset at 1440p shows a minimum FPS of 245, which is still above 240 Hz, making it the safest choice for consistent frame delivery on high-refresh displays.

For 4K displays, the Ultra preset at 117 FPS is suitable for a 120 Hz monitor, as it provides 97% of the refresh rate. High settings at 144 FPS are ideal for a 144 Hz display, offering a 0% headroom but with a stable average. Medium settings at 163 FPS provide a 13% headroom over 144 Hz, which is the recommended choice for players who want a buffer for demanding scenes. The Low preset at 179 FPS is only necessary for 180 Hz or higher refresh rates, which is rare for 4K monitors. The data shows that Medium at 4K offers the best balance of visual quality and performance, with a minimum FPS of 138 that stays above 120 Hz, ensuring smooth gameplay even in complex sandbox environments.

Hardware Specifications

AMD Ryzen 5 4600G

Cores / Threads 6 / 12
Base Clock 3700 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 9070

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2520 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 4600G + AMD Radeon RX 9070 in Roblox

Resolution Settings Avg FPS
3840x2160 Low 179.0
3840x2160 Medium 163.0
3840x2160 High 144.0
3840x2160 Ultra 117.0
2560x1440 Low 316.0
2560x1440 Medium 288.0
2560x1440 High 254.0
2560x1440 Ultra 206.0
1920x1080 Low 474.0
1920x1080 Medium 431.0
1920x1080 High 381.0
1920x1080 Ultra 309.0

Roblox with Ryzen 5 4600G + Other GPUs

See how Roblox performs with the same CPU but different graphics cards.

Roblox with RX 9070 + Other CPUs

See how Roblox performs with the same GPU but different processors.

Other Games with Ryzen 5 4600G + RX 9070

Explore FPS benchmarks for other games using this same hardware combination.