Roblox
This combination delivers exceptional performance with an average of 177 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 74 | 93 | 107 | 118 |
| 1440p QHD | 133 | 164 | 188 | 207 |
| 1080p Full HD | 203 | 249 | 281 | 310 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Roblox with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3060 Ti combination produces measured frame rates in Roblox that range from 74.2 FPS at 4K Ultra to 309.8 FPS at 1080p Low. The data set covers three resolutions and four quality presets, providing a clear picture of how this pairing scales with rendering load. Roblox, a sandbox title, is not particularly demanding on modern hardware, and the results confirm that this mid-range duo delivers high frame rates across the board.
Resolution Scaling
The measured FPS values show a consistent decline as resolution increases, but the magnitude of that decline varies by preset. At High settings, the average frame rate drops from 248.8 FPS at 1920x1080 to 163.8 FPS at 2560x1440, and further to 93.3 FPS at 3840x2160. The same pattern holds for Low, Medium, and Ultra presets. For Low, the numbers are 309.8, 206.6, and 118.1 FPS respectively. Medium yields 280.5, 187.8, and 107.1 FPS. Ultra produces 202.5, 133.4, and 74.2 FPS.
The scaling from 1080p to 1440p is relatively gentle, with frame rates dropping by roughly 30-40% depending on preset. The step from 1440p to 4K is steeper, with reductions of about 40-45% across all presets. This pattern suggests that the GPU becomes the primary limiting factor at higher resolutions, as the pixel count increases significantly. At 1080p, the CPU and GPU are both capable of pushing frame rates well above 200 FPS, indicating that neither component is a hard bottleneck at that resolution. At 4K, the GPU's workload grows, and the frame rates settle into a range that is still playable but noticeably lower.
The data also shows that the gap between Low and Ultra presets widens as resolution increases. At 1080p, the difference between Low and Ultra is 107.3 FPS (309.8 vs 202.5). At 4K, the same gap is 43.9 FPS (118.1 vs 74.2). This indicates that the GPU's ability to handle higher quality settings is more constrained at 4K, where the pixel fill rate becomes a larger factor.
Settings Recommendations
Given the measured frame rates, the optimal preset depends on the target refresh rate and resolution. At 1920x1080, all four presets exceed 200 FPS, with Low reaching 309.8 FPS and Ultra still delivering 202.5 FPS. For a 144 Hz monitor, any preset will comfortably hit the refresh ceiling. For a 240 Hz display, Low or Medium would be necessary to approach that rate, as High and Ultra fall short of 240 FPS.
At 2560x1440, Low and Medium both stay above 180 FPS (206.6 and 187.8), while High drops to 163.8 and Ultra to 133.4. For 144 Hz gaming, Low, Medium, or High are all viable, with Ultra still above 120 FPS. For 165 Hz, Low and Medium are the only presets that exceed that threshold.
At 3840x2160, the frame rates range from 118.1 FPS on Low to 74.2 FPS on Ultra. For a 60 Hz display, every preset is sufficient, and even Ultra provides a 74.2 FPS average. For 120 Hz or higher, only Low and Medium (118.1 and 107.1) come close, while High and Ultra fall below 100 FPS. The data suggests that for 4K gaming, Low or Medium offers the best balance of visual quality and frame rate, as the difference between Medium and High is only 13.8 FPS (107.1 vs 93.3), while the jump from Low to Medium is 11 FPS.
How This Combo Ranks
In the benchmark database, this specific CPU-GPU combination ranks 1243rd out of 1800 tested combos for Roblox. That places it in the lower-middle portion of the field, which is consistent with the hardware's mid-range positioning. The CPU itself sits at the 76th percentile among all CPUs, with an average benchmark score of 18129. Its nearest rivals include the Intel Core i5-11400 (score 18150, deltaPct -0.1), the AMD Ryzen 5 7535HS (score 18101, deltaPct 0.2), and the AMD Ryzen 5 1600 (score 18158, deltaPct -0.2). These deltaPct values indicate that the Ryzen 5 3600 is within 0.2% of these processors in average performance, making it a very close match to several mainstream options.
The GPU, the RTX 3060 Ti, holds the 69th percentile among all GPUs, with an average benchmark score of 25120. Its nearest rivals are the AMD Radeon RX 6700M (score 25180, deltaPct -0.2), the AMD Radeon RX 6600 (score 25235, deltaPct -0.5), and the AMD Radeon 890M (score 25246, deltaPct -0.5). The deltaPct values show the RTX 3060 Ti is within 0.5% of these cards, meaning its raw compute performance is essentially on par with several other mid-range offerings.
The combo rank of 1243 out of 1800 suggests that while the individual components are competitive, the pairing does not stand out as a top performer in Roblox specifically. This is likely because Roblox is not a demanding title, and many combinations can achieve high frame rates, so the ranking is more about the absolute FPS numbers rather than any bottleneck.
Measured FPS Breakdown
The following table lists all measured average frame rates for the Ryzen 5 3600 and RTX 3060 Ti in Roblox.
| Resolution | Settings | Avg FPS |
|------------|----------|---------|
| 3840x2160 | High | 93.3 |
| 3840x2160 | Low | 118.1 |
| 3840x2160 | Medium | 107.1 |
| 3840x2160 | Ultra | 74.2 |
| 2560x1440 | High | 163.8 |
| 2560x1440 | Low | 206.6 |
| 2560x1440 | Medium | 187.8 |
| 2560x1440 | Ultra | 133.4 |
| 1920x1080 | High | 248.8 |
| 1920x1080 | Low | 309.8 |
| 1920x1080 | Medium | 280.5 |
| 1920x1080 | Ultra | 202.5 |
The data shows a clear hierarchy: lower resolutions and lower quality presets yield higher frame rates. At 1080p, even the most demanding preset (Ultra) maintains an average above 200 FPS, which is more than sufficient for most displays. At 1440p, the range narrows, with Low and Medium staying above 180 FPS and Ultra still above 130 FPS. At 4K, the frame rates drop to a range where 60 FPS is easily achievable on all presets, but 120 FPS requires Low or Medium.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture with a GA104 chip, manufactured on an 8 nm process. It features 8 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 448.0 GB/s. The base clock is 1410 MHz, with a boost clock of 1665 MHz. The memory operates at 1750 MHz, which translates to 14 Gbps effective. These specifications are more than adequate for Roblox, which does not require large texture pools or high memory bandwidth. The 8 GB VRAM is unlikely to be a limiting factor at any of the tested settings, as Roblox's assets are relatively modest.
The GPU's compute capabilities include 4864 shading units, 152 texture mapping units, and 80 raster output units. It also has 38 ray tracing cores and 152 tensor cores, though Roblox does not utilize ray tracing in the measured scenarios. The FP32 performance is 16.20 TFLOPS, and the pixel rate is 133.2 GPixel/s. These numbers indicate a solid mid-range GPU that can handle modern titles at 1080p and 1440p, and the measured Roblox frame rates confirm this.
In the benchmark database, the RTX 3060 Ti's average score is 25120, with a PassMark G3D score of 20349 and a Geekbench OpenCL score of 109075. Its nearest rivals, as listed, are within 0.5% in average score, showing that it performs on par with other mid-range cards. The GPU's percentile of 69 means it outperforms 69% of all GPUs in the database, which is a reasonable standing for a card released in late 2020.
CPU Role
The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture (Matisse). It has a base clock of 3.60 GHz and a boost clock of 4.20 GHz. The CPU includes 64 KB of L1 cache per core, 512 KB of L2 cache per core, and a shared 32 MB L3 cache. It supports DDR4 memory in a dual-channel configuration, with a memory bandwidth of 51.2 GB/s. The CPU is built on a 7 nm process and has a TDP of 65 W.
For Roblox, the CPU's single-thread performance is particularly relevant, as the game's physics and scripting often rely on a few cores. The Ryzen 5 3600 achieves a Cinebench R23 single-core score of 2124 and a multi-core score of 15045. Its PassMark single-thread score is 2562, and its 3DMark single-thread score is 696. These numbers indicate strong per-core performance, which helps maintain high frame rates even at 1080p where the CPU is more likely to be a factor.
The CPU's average benchmark score of 18129 places it at the 76th percentile among all CPUs. Its nearest rivals, as noted, are within 0.2% in average score, meaning the Ryzen 5 3600 is essentially tied with several other mainstream processors. The 6-core/12-thread configuration provides ample parallelism for Roblox's background tasks, but the game itself does not appear to be heavily multi-threaded based on the frame rates observed. The data shows that at 1080p, the CPU is not a bottleneck, as frame rates exceed 300 FPS on Low settings, which is well above what most displays can show.
Hardware Specifications
AMD Ryzen 5 3600
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3060 Ti in Roblox
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 118.1 |
| 3840x2160 | Medium | 107.1 |
| 3840x2160 | High | 93.3 |
| 3840x2160 | Ultra | 74.2 |
| 2560x1440 | Low | 206.6 |
| 2560x1440 | Medium | 187.8 |
| 2560x1440 | High | 163.8 |
| 2560x1440 | Ultra | 133.4 |
| 1920x1080 | Low | 309.8 |
| 1920x1080 | Medium | 280.5 |
| 1920x1080 | High | 248.8 |
| 1920x1080 | Ultra | 202.5 |
Roblox with Ryzen 5 3600 + Other GPUs
See how Roblox performs with the same CPU but different graphics cards.
Roblox with RTX 3060 Ti + Other CPUs
See how Roblox performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.