Barony
This combination delivers exceptional performance with an average of 134 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 43 | 61 | 73 | 95 |
| 1440p QHD | 81 | 118 | 135 | 179 |
| 1080p Full HD | 133 | 185 | 215 | 288 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
Barony, the 2015 roguelike, proves to be remarkably scalable on the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3060 Ti combination. The measured data shows this pairing is capable of delivering extremely high frame rates across all tested resolutions, with the performance ceiling being dictated primarily by the graphics card at higher settings and by the processor at lower, more CPU-bound configurations. The benchmark results indicate a system that is balanced enough for smooth 4K play but exceptionally potent at 1440p and 1080p.
Resolution Scaling
The performance drop from 1080p to 4K is significant and tells a clear story about where the bottleneck lies. At Low settings, the average frame rate falls from 287.6 FPS at 1920x1080 to 178.6 FPS at 2560x1440, a reduction of 109 FPS, and then further down to 95.2 FPS at 3840x2160. This steep decline of roughly 66.9% from 1080p to 4K indicates that the game becomes increasingly GPU-bound as the pixel count rises. The RTX 3060 Ti’s 8 GB of GDDR6 memory and 448.0 GB/s bandwidth are being pushed harder, while the Ryzen 5 3600’s 6-core, 12-thread configuration has more headroom to maintain frame pacing.
The scaling pattern shifts dramatically when moving to Ultra settings. Here, the frame rate drops from 132.5 FPS at 1080p to 80.9 FPS at 1440p, and then to 43.2 FPS at 4K. The percentage drop from 1080p to 4K is 67.4%, which is similar to the Low preset, but the absolute numbers are much lower. This suggests that at Ultra, the graphical load is so heavy that the GPU is the dominant limiting factor at every resolution. The 4K Ultra result of 43.2 FPS is below the 60 FPS threshold, highlighting that this preset is too demanding for the resolution on this hardware.
The data shows that the transition from 1080p to 1440p is less punishing than from 1440p to 4K. For example, at Medium settings, the drop from 214.7 FPS at 1080p to 134.7 FPS at 1440p is 80 FPS, whereas the drop from 1440p to 4K is 61.9 FPS. This nonlinear scaling is typical of a GPU that has enough memory bandwidth for 1440p but starts to struggle with the sheer pixel fill rate required at 4K. The RTX 3060 Ti’s pixel rate of 133.2 GPixel/s is a key factor here, as it must process over four times the pixels at 4K compared to 1080p.
Settings Recommendations
The measured FPS rows provide clear guidance for optimal settings at each resolution. For 4K, the High preset is the sweet spot, delivering an average of 61.1 FPS. This is just above the 60 FPS target, offering a playable experience without the performance penalty of Ultra, which drops to 43.2 FPS. The Low preset at 4K yields 95.2 FPS, which is significantly faster but sacrifices visual fidelity for a frame rate that is likely unnecessary for a roguelike title.
At 1440p, the High preset is the recommended choice, as it produces an excellent 118.3 FPS average. This leaves substantial headroom above the 60 FPS target, ensuring smooth gameplay even in intense moments. While the Ultra preset is also viable at 80.9 FPS, the High setting provides a better balance of visual quality and performance, as the jump to Ultra only adds a modest visual improvement while costing nearly 40 FPS. The Low and Medium presets, at 178.6 and 134.7 FPS respectively, are far beyond what is needed for a smooth experience.
The 1080p resolution offers the most flexibility. Here, even the Ultra preset achieves a high 132.5 FPS average, making it the best choice for players who want maximum visual detail. For those with high refresh rate monitors, the Medium preset at 214.7 FPS or the Low preset at 287.6 FPS will push frame rates far beyond the typical 144 Hz display’s capabilities. The High preset at 184.6 FPS is also an excellent compromise, proving that the hardware is never truly CPU-bound at this resolution, even with the Ryzen 5 3600’s single-thread performance of 696 in the 3DMark single-thread test.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is the primary driver of performance in Barony, especially as resolution and settings increase. With 8 GB of GDDR6 memory on a 256-bit bus, the card provides a memory bandwidth of 448.0 GB/s, which is sufficient to handle the game’s textures at all tested settings. The GPU’s boost clock of 1665 MHz, alongside its 4864 shading units, allows it to maintain high frame rates, but the data shows its limits at 4K Ultra, where the average dips to 43.2 FPS. This is a clear indication that the card’s compute power, rated at 16.20 TFLOPS for FP32, is fully saturated by the game’s most demanding preset.
The GPU’s role is also evident in the performance delta between the Low and Ultra presets at each resolution. At 1080p, the difference is 155.1 FPS, but at 4K it narrows to 52 FPS. This suggests that at lower resolutions, the CPU is more capable of feeding frames to the GPU, allowing the settings to have a larger impact. At 4K, the GPU is already working at its limit, so changing settings has a smaller relative effect. The RTX 3060 Ti’s DirectX 12 Ultimate support, with a passmark DirectX 12 score of 78, ensures it is well-optimized for the modern rendering paths that Barony uses.
The VRAM capacity of 8 GB does not appear to be a limiting factor in these tests, as there are no signs of severe stuttering or frame drops that would indicate memory swapping. The GPU’s performance relative to its rivals, such as being 0.2% behind the AMD Radeon RX 6700M in average benchmark score, shows it is a solid mid-range performer. Its 69th percentile ranking among all GPUs confirms that it is a capable part, but the 4K Ultra result of 43.2 FPS demonstrates that it is not a high-end 4K powerhouse.
Measured FPS Breakdown
The measured frame rates provide a comprehensive view of the system’s capabilities. At 1920x1080, the average FPS ranges from 287.6 on Low to 132.5 on Ultra. The Medium preset delivers 214.7 FPS, while High achieves 184.6 FPS. These numbers indicate that the CPU, with its 3DMark max threads score of 4603 and Cinebench R23 multicore score of 15045, is not a bottleneck at this resolution, allowing the GPU to scale freely with settings.
Moving to 2560x1440, the frame rates are still very high. The Low preset averages 178.6 FPS, Medium 134.7 FPS, High 118.3 FPS, and Ultra 80.9 FPS. The drop from Low to Ultra is 97.7 FPS, showing that the GPU is becoming more of a limiting factor here. The performance is still excellent, with even the Ultra preset comfortably exceeding 60 FPS.
At 3840x2160, the demands on the GPU are significant. The Low preset manages an average of 95.2 FPS, while Medium drops to 72.8 FPS. The High preset is the only one to stay above 60 FPS, with an average of 61.1 FPS. The Ultra preset falls to 43.2 FPS, which is below the standard for smooth gameplay. The combination ranks 1185th out of 1702 tested combos for this game, placing it in the upper-middle tier of performance.
FAQ
Q: Can this system run Barony at 4K with high settings?
A: Yes. The measured data shows an average of 61.1 FPS at 3840x2160 with High settings. This is just above the 60 FPS target for smooth gameplay.
Q: What is the best settings preset for 1440p?
A: The High preset is recommended, as it delivers an average of 118.3 FPS. This provides a high frame rate while maintaining good visual quality, and the Ultra preset, at 80.9 FPS, offers only a marginal visual upgrade for a significant performance cost.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: The data suggests the GPU is the primary driver, as the frame rate scales significantly with settings, from 287.6 FPS on Low to 132.5 FPS on Ultra. The CPU is not a limiting factor at this resolution, given its strong multi-threaded performance.
Q: How does the RTX 3060 Ti compare to its closest rivals for this game?
A: In average benchmark scores, the RTX 3060 Ti is 0.2% behind the AMD Radeon RX 6700M and 0.5% behind the AMD Radeon RX 6600. Its percentile ranking is 69th among all GPUs, indicating it is a solid mid-range performer.
Q: What frame rate can I expect at 1080p with Ultra settings?
A: The average FPS at 1920x1080 with Ultra settings is 132.5. This is a high frame rate that will be smooth on most standard 60 Hz monitors and is also capable of taking advantage of higher refresh rate displays.
Q: Is the 8 GB VRAM on the GPU sufficient for Barony?
A: Yes. The measured frame rates do not indicate any issues related to VRAM capacity at any of the tested resolutions or settings. The 8 GB of GDDR6 memory, combined with 448.0 GB/s of bandwidth, appears to be more than enough for this game.
Hardware Specifications
AMD Ryzen 5 3600
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3060 Ti in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 95.2 |
| 3840x2160 | Medium | 72.8 |
| 3840x2160 | High | 61.1 |
| 3840x2160 | Ultra | 43.2 |
| 2560x1440 | Low | 178.6 |
| 2560x1440 | Medium | 134.7 |
| 2560x1440 | High | 118.3 |
| 2560x1440 | Ultra | 80.9 |
| 1920x1080 | Low | 287.6 |
| 1920x1080 | Medium | 214.7 |
| 1920x1080 | High | 184.6 |
| 1920x1080 | Ultra | 132.5 |
Barony with Ryzen 5 3600 + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 3060 Ti + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 5 3600 + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.