Road 96

Road 96, a narrative-driven adventure from 2021, presents an interesting scenario for the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4060 pairing. The measured frame rates across resolutions and settings reveal a system that is predominantly limited by the graphics card at higher fidelity levels, while the processor shows its strength at lower resolutions. The data indicates a configuration capable of smooth gameplay at 1080p and 1440p, with 4K remaining a challenge for the most demanding presets.

Resolution Scaling

The progression from 1080p to 4K demonstrates a classic GPU-bound scaling pattern. At 1080p with High settings, the combo achieves an average of 121.1 FPS. Moving to 1440p High, the average drops to 77.1 FPS, a 36% reduction. At 4K High, the average falls to 39.1 FPS, which is a 68% reduction from the 1080p figure. This steep decline is characteristic of a system where the RTX 4060's rendering capabilities become the primary bottleneck as pixel count increases.

The scaling pattern becomes even more pronounced at the highest quality preset. At 1080p Ultra, the average is 92.7 FPS. This drops to 58.2 FPS at 1440p Ultra and further to 29.5 FPS at 4K Ultra. The 4K Ultra result is the only measured configuration that falls below the 30 FPS threshold, indicating that this resolution and preset combination is too demanding for consistent playability. The data clearly shows that the gap between 1080p and 4K widens with higher settings, confirming the GPU's role as the limiting component.

Conversely, when the graphics load is minimized, the CPU's contribution becomes more apparent. At 1080p Low, the system reaches 198.7 FPS, which is the highest score in the entire dataset. The scaling from Low to Medium at 1080p (198.7 to 147.4 FPS) represents a 26% performance hit, while the jump from High to Ultra at the same resolution (121.1 to 92.7 FPS) is a 23% reduction. These figures suggest that the Ryzen 5 5600G, with its 6 cores and 12 threads, is well-equipped to feed the RTX 4060 at lower resolutions, but the GPU's workload becomes the dominant factor as resolution and visual complexity increase.

How This Combo Ranks

Within the benchmark database, this specific combination of the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4060 holds a rank of 968 out of 1684 tested combinations for Road 96. This places the pairing in the upper-middle portion of the overall distribution. While not a top-tier configuration, it is positioned ahead of a significant majority of other systems that have been tested with this game.

The ranking reflects a balance between the CPU and GPU. The Ryzen 5 5600G is a capable processor, sitting in the 78th percentile when compared against all CPUs in our database. Its average benchmark score of 19983 puts it in close competition with several Intel and AMD parts. For instance, it is a mere 0.2% ahead of the Intel Core i7-11600H and 0.3% ahead of the AMD Ryzen Threadripper PRO 5995WX. Conversely, it trails the Intel Core i7-11800H and AMD EPYC 7713P by 0.2%. This tight grouping of rivals indicates that the CPU's processing power is not a distinguishing factor.

The GPU component, the RTX 4060, holds a 66th percentile ranking among all GPUs. Its average benchmark score of 23181 places it near the AMD Radeon RX 6600M, which is 0.6% ahead, and the NVIDIA GeForce GTX 780 Ti, which is 0.7% ahead. It also edges out the Intel Arc B580 and AMD Radeon 760M by 0.7% and 0.8% respectively. The combo's overall rank of 968 suggests that the RTX 4060's performance in this adventure title, while not exceptional, is sufficient to secure a solid position in the rankings, largely due to the CPU's ability to avoid holding it back.

GPU Role

The NVIDIA GeForce RTX 4060 is built on the Ada Lovelace architecture and utilizes the AD107 chip on a 5 nm process. It features 8 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 272.0 GB/s. The GPU operates at a base clock of 1830 MHz and a boost clock of 2460 MHz. These specifications are directly reflected in the measured frame rates. The 8 GB frame buffer is not a limiting factor at the tested resolutions, as the highest 4K Ultra setting still manages to run, albeit at an average of 29.5 FPS.

The boost clock of 2460 MHz is a key indicator of the card's performance ceiling. The data shows that the GPU can sustain high frame rates when the computational load is moderate. For instance, at 1440p Medium, the average FPS is 94.6, and at 1080p High, it is 121.1. These results suggest that the RTX 4060 is well-suited for 1080p and 1440p gaming in Road 96. The card's FP32 performance of 15.11 TFLOPS and texture rate of 236.2 GTexel/s are sufficient for the game's visual demands at these resolutions.

The GPU's memory clock of 2125 MHz, with an effective data rate of 17 Gbps, contributes to its overall throughput. However, the primary constraint at 4K is the sheer number of pixels the GPU must process, which is evident in the significant frame rate drops. The RTX 4060's 48 ROPs and 96 TMUs are tasked with rasterization and texture filtering, and at 4K Ultra, these units are saturated, resulting in the lowest measured performance. The card's performance relative to its nearest rivals, such as the AMD Radeon RX 6600M, which is only 0.6% faster in aggregate benchmarks, indicates that its role in this combo is to provide dependable, mid-range performance rather than high-end 4K capability.

Settings Recommendations

Based on the measured frames per second, the optimal settings for this combination depend on the target resolution and desired smoothness. For a standard 60 FPS experience at 1440p, the High preset is the clear choice, delivering an average of 77.1 FPS. This provides a significant visual upgrade over Medium, which runs at 94.6 FPS, while still maintaining a comfortable margin above the 60 FPS threshold. The Ultra preset at 1440p, which averages 58.2 FPS, may be acceptable for some, but it dips below the 60 FPS target and is not recommended for consistent smoothness.

At 1080p, the options are more flexible. The High preset offers an excellent balance, achieving 121.1 FPS and allowing for high refresh rate displays. The Ultra preset, at 92.7 FPS, is also a viable option for those who prioritize visual fidelity over maximum frame rates, as it remains well above 60 FPS. The Medium preset at 147.4 FPS and Low at 198.7 FPS are available for competitive play or for users with high refresh rate monitors, but they do not take full advantage of the GPU's capabilities.

For 4K, the data shows that only the Low preset, which averages 66.2 FPS, provides a playable experience. The Medium preset at 51 FPS may be playable for some, but the High preset at 39.1 FPS and Ultra at 29.5 FPS are not recommended for a smooth experience. Therefore, the best experience for a 60 FPS target is to use the High preset at 1440p or the High or Ultra preset at 1080p. For those with 4K displays, the Low preset is the only reliable option.

FAQ

Q: What is the best resolution and settings combination for a consistent 60 FPS experience?

A: The data shows that the High preset at 2560x1440, averaging 77.1 FPS, and the High preset at 1920x1080, averaging 121.1 FPS, are the most reliable options for maintaining a 60 FPS frame rate. The Ultra preset at 1440p, at 58.2 FPS, is borderline.

Q: Can this combo handle 4K gaming in Road 96?

A: Yes, but with significant limitations. At 4K, only the Low preset (66.2 FPS) and Medium preset (51 FPS) are playable. The High and Ultra presets at 4K produce averages of 39.1 FPS and 29.5 FPS, respectively, which are below the 60 FPS threshold.

Q: How does the Ryzen 5 5600G's CPU performance compare to its closest rivals?

A: The CPU's average benchmark score of 19983 places it 0.2% ahead of the Intel Core i7-11600H and 0.3% ahead of the AMD Ryzen Threadripper PRO 5995WX. It is 0.2% behind both the Intel Core i7-11800H and the AMD EPYC 7713P.

Q: What is the GPU's performance relative to other cards in the database?

A: The RTX 4060 holds a 66th percentile ranking among all GPUs. Its average benchmark score of 23181 is 0.6% lower than the AMD Radeon RX 6600M and 0.7% lower than the NVIDIA GeForce GTX 780 Ti, but it is 0.7% higher than the Intel Arc B580.

Q: What is the frame rate difference between the Low and Ultra presets at 1080p?

A: At 1080p, the Low preset averages 198.7 FPS, while the Ultra preset averages 92.7 FPS. This represents a performance reduction of over 53% when moving from Low to Ultra.

Q: Is the CPU a bottleneck at 4K resolutions?

A: No. The significant frame rate drops at 4K, such as the decline from 121.1 FPS at 1080p High to 39.1 FPS at 4K High, indicate that the NVIDIA GeForce RTX 4060 is the limiting component. The CPU's performance is sufficient to keep up with the GPU's demands at these higher resolutions.