Revolution Idle

# Revolution Idle — Intel Core i5-14600KF + NVIDIA GeForce RTX 3070

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 3070 delivers a benchmark profile that is heavily dependent on resolution and preset selection in Revolution Idle. At 1920x1080, the combo achieves a robust 151 FPS on Low settings, but this figure collapses to 23 FPS at 3840x2160 on Ultra, revealing a system that is far more capable at mainstream resolutions than at 4K extremes. The measured data indicates a 42% performance drop from 1080p High (109 FPS) to 1440p High (69 FPS), and a further 48% drop from 1440p High to 4K High (36 FPS), suggesting that the GPU becomes the primary bottleneck as pixel count rises. This analysis breaks down the scaling behavior, the CPU and GPU contributions, and provides concrete settings guidance based solely on the measured frames.

Resolution Scaling

The FPS scaling from 1080p to 4K in Revolution Idle follows a predictable but steep curve, with the RTX 3070's 8 GB GDDR6 memory and 448.0 GB/s bandwidth playing a decisive role. At 1920x1080 Low, the combo produces 151 FPS, which drops to 95 FPS at 2560x1440 Low (a 37% reduction) and further to 50 FPS at 3840x2160 Low (a 67% reduction from the 1080p baseline). This pattern is consistent with a GPU-bound scenario: as resolution increases, the pixel throughput demand grows faster than the memory bandwidth and shading resources can compensate, even at the lowest settings.

The scaling becomes more severe at higher presets. At Medium settings, the measured average FPS falls from 114 at 1080p to 72 at 1440p (a 37% drop) and then to 38 at 4K (a 67% drop from 1080p). High settings show a similar trajectory: 109 FPS at 1080p, 69 at 1440p, and 36 at 4K, representing a 67% total reduction across the resolution ladder. Ultra settings are the most punishing, with 70 FPS at 1080p, 44 at 1440p, and 23 at 4K — a 67% drop from the lowest to highest resolution, mirroring the relative decline seen in other presets.

The uniformity of these percentage drops across all four settings levels is striking. In every case, moving from 1080p to 4K results in approximately a two-thirds reduction in average FPS, indicating that the limiting component is consistent regardless of graphical fidelity. This points squarely at the GPU: the RTX 3070's 5888 shading units and 184 texture mapping units are taxed by the raw pixel count at 4K, while the CPU's 14 cores and 20 threads are not the binding constraint at any resolution. The data shows that 4K Ultra at 23 FPS is effectively unplayable for smooth gameplay, while 4K Low at 50 FPS approaches a playable threshold but still falls short of the 60 FPS target that 1080p and 1440p configurations easily exceed.

CPU Role

The Intel Core i5-14600KF brings substantial compute resources to Revolution Idle, with 14 cores (6 performance and 8 efficiency, based on the Raptor Lake architecture), 20 threads, and a boost clock of 5.30 GHz. The CPU's benchmark scores reinforce its strength: a Cinebench R23 multi-core score of 32544 and a single-core score of 4594, with a Geekbench multi-core score of 17085 and single-core score of 2445. These figures place the i5-14600KF at the 90th percentile among all CPUs, with an average benchmark score of 49394.

In the context of this game, the CPU's role is primarily to feed the GPU with draw calls and game logic updates, but the measured FPS data suggests it is rarely the bottleneck. At 1080p Low, the combo reaches 151 FPS, which is the highest measured value across all configurations; if the CPU were limiting performance, we would expect to see a plateau at lower resolutions regardless of settings, but instead we see FPS scaling with GPU load. The CPU's single-core performance, evidenced by a PassMark single-thread score of 4273, is more than adequate for the game's logic, and the multi-core capability (PassMark multi-thread score of 38697) ensures that background threads do not interfere with frame pacing.

Comparing to nearest rivals, the i5-14600KF has an average score of 49394, which is 0.3% higher than the AMD Ryzen 9 7900 (49228) and 0.8% higher than the Intel Core Ultra 5 245 (48995). It trails the AMD Ryzen AI Max+ 388 (49796) by 0.8%. These small deltas indicate that the CPU is competitive with top-tier alternatives, but in Revolution Idle, the game's relatively light CPU demands mean that the i5-14600KF's headroom is never fully stressed. The 24 MB of shared L3 cache and 2 MB per-core L2 cache provide ample data locality for the game's update loops, but the performance ceiling is set by the GPU, not the processor.

GPU Role

The NVIDIA GeForce RTX 3070 is the dominant factor in this combo's Revolution Idle performance, and its specifications explain the measured scaling. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, yielding 448.0 GB/s of bandwidth, with a boost clock of 1725 MHz. Its 5888 shading units, 184 TMUs, and 96 ROPs deliver 20.31 TFLOPS of FP32 compute, which is respectable for 1440p gaming but insufficient for consistent 4K performance in this title.

The GPU's benchmark scores corroborate its mid-to-high tier positioning: a 3DMark Steel Nomad DX12 score of 3162 and a PassMark G3D score of 22214 place it at the 61st percentile among all GPUs, with an average benchmark score of 17208. Its nearest rivals include the AMD Radeon RX 7600 XT (17083, 0.7% slower), the NVIDIA GeForce GTX 690 (17037, 1% slower), and the NVIDIA Tesla K40c (17468, 1.5% faster). These tight margins indicate that the RTX 3070 sits in a crowded performance band, but its 8 GB memory capacity is a notable limitation at 4K, where texture data and frame buffers consume more VRAM.

The measured FPS data directly reflects this VRAM and bandwidth pressure. At 4K Ultra, the combo delivers only 23 FPS, which is the lowest score in the entire dataset; at 4K High, it rises to 36 FPS, and at 4K Medium to 38 FPS. The jump to 4K Low yields 50 FPS, but this still requires a 28% reduction in average FPS compared to 1440p Low (95 FPS). The GPU's pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are simply overwhelmed by 8.3 million pixels at 3840x2160, especially when combined with higher-quality shaders and effects at Ultra settings. In contrast, at 1080p, the GPU is not saturated, allowing the combo to reach 151 FPS at Low and 109 FPS at High, indicating that the RTX 3070 is well-suited for 1080p and 1440p gaming but not for 4K beyond Low settings.

FAQ

*Q: What is the highest average FPS this combo achieves in Revolution Idle?*

A: The highest measured average FPS is 151, achieved at 1920x1080 resolution with Low settings. This represents the best-case scenario for the Intel Core i5-14600KF and NVIDIA GeForce RTX 3070 combination.

*Q: Can this combo handle 4K gaming in Revolution Idle?*

A: At 3840x2160, the combo produces 50 FPS on Low settings, 38 FPS on Medium, 36 FPS on High, and 23 FPS on Ultra. Only the Low preset approaches a playable frame rate, while Ultra settings fall well below the 30 FPS threshold for smooth gameplay.

Q: How does the RTX 3070 compare to its nearest rival, the AMD Radeon RX 7600 XT?

A: The RTX 3070 has an average benchmark score of 17208, which is 0.7% higher than the RX 7600 XT's 17083. In practical terms, this means the two GPUs perform nearly identically in synthetic benchmarks, but the RTX 3070's 8 GB VRAM and 448.0 GB/s bandwidth are identical to its rival's specifications.

Q: Is the CPU or GPU the bottleneck in this system?

A: The data indicates the GPU is the limiting component, especially at higher resolutions. At 1080p Low, the combo reaches 151 FPS, but at 4K Ultra, it drops to 23 FPS, a 67% reduction. The CPU's high single-core and multi-core scores (4594 and 32544 in Cinebench R23, respectively) suggest it has ample headroom, while the GPU's performance degrades consistently with pixel count.

Q: What is the combo's ranking among all tested configurations?

A: The Intel Core i5-14600KF + NVIDIA GeForce RTX 3070 combo ranks 1569 out of 3712 tested combos in Revolution Idle, placing it in the 58th percentile of all systems.

Q: How much FPS is lost when moving from 1080p to 1440p at High settings?

A: At High settings, the average FPS drops from 109 at 1920x1080 to 69 at 2560x1440, a 37% reduction. This is consistent with the scaling observed across all other presets.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance across all settings. Low settings produce an average of 151 FPS, Medium produces 114 FPS with a minimum of 97 and maximum of 131, High produces 109 FPS, and Ultra produces 70 FPS. The spread from Low to Ultra is 81 FPS, indicating that the GPU has significant headroom at this resolution, and even the most demanding preset remains well above the 60 FPS threshold for smooth gameplay.

Moving to 2560x1440, the averages decrease notably. Low settings yield 95 FPS, Medium yields 72 FPS (minimum 61, maximum 83), High yields 69 FPS, and Ultra yields 44 FPS. The gap between Low and Ultra narrows to 51 FPS, showing that the GPU is beginning to feel the pressure of additional pixels. The 1440p Medium result of 72 FPS is particularly relevant, as it offers a balance between visual quality and performance, with a minimum FPS of 61 ensuring that frame drops are rare.

At 3840x2160, performance falls sharply. Low settings produce 50 FPS, Medium produces 38 FPS (minimum 32, maximum 43), High produces 36 FPS, and Ultra produces 23 FPS. The spread from Low to Ultra is just 27 FPS, indicating that the GPU is saturated and that even the lowest settings cannot achieve a smooth 60 FPS experience. The 4K Medium minimum of 32 FPS suggests occasional stutter, while the Ultra average of 23 FPS is below the threshold for playable frame rates in most scenarios.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution and desired frame rate. At 1920x1080, the Ultra preset at 70 FPS provides the best visual experience while maintaining a smooth frame rate, though High at 109 FPS offers a substantial performance margin for users who prioritize responsiveness over graphical fidelity. For users with 1440p monitors, the Medium preset at 72 FPS (minimum 61 FPS) is the recommended choice, as it delivers a solid balance of visual quality and performance, whereas the High preset at 69 FPS is nearly identical in performance but may offer slightly better image quality at the cost of a 3 FPS reduction.

At 3840x2160, no setting achieves a 60 FPS average, so users must make a trade-off. The Low preset at 50 FPS is the only option that approaches playable territory, and it is the recommended setting for 4K gaming. The Medium preset at 38 FPS is playable but with noticeable frame drops, and the High preset at 36 FPS is similar, while the Ultra preset at 23 FPS should be avoided due to its low frame rate. For users who prioritize visual fidelity over frame rate, the Medium preset offers the best compromise at 4K, but for competitive or fast-paced gameplay, the Low preset is the only viable choice.

How This Combo Ranks

The Intel Core i5-14600KF + NVIDIA GeForce RTX 3070 combination ranks 1569 out of 3712 tested combos in Revolution Idle, placing it in the upper-middle tier of all systems. This ranking reflects the GPU's 61st percentile standing among all GPUs, while the CPU sits at the 90th percentile, indicating that the system's overall performance is constrained by the graphics card rather than the processor. The CPU's average benchmark score of 49394 is competitive with its nearest rivals, including the AMD Ryzen 9 7900 (49228, 0.3% slower) and the Intel Core Ultra 5 245 (48995, 0.8% slower), but the GPU's average score of 17208 is only narrowly ahead of the AMD Radeon RX 7600 XT (17083, 0.7% slower) and the NVIDIA GeForce GTX 690 (17037, 1% slower).

This ranking suggests that the combo is well-suited for 1080p and 1440p gaming, where it achieves high frame rates across most settings, but it falls short of top-tier performance at 4K. The 1569th position out of 3712 combos places it in the 58th percentile, meaning that roughly 42% of tested systems outperform it, likely due to more powerful GPUs with higher VRAM capacities or faster memory bandwidth. For users targeting 1440p gaming, this combo delivers an excellent experience, but for 4K enthusiasts, the data shows that the RTX 3070's 8 GB VRAM is a limiting factor, and users should consider lower presets or a more powerful GPU to achieve higher frame rates at that resolution.