Revolution Idle
This combination offers playable performance with an average of 49 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 17 | 24 | 26 | 32 |
| 1440p QHD | 33 | 44 | 48 | 67 |
| 1080p Full HD | 47 | 75 | 76 | 101 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Revolution Idle with AMD Ryzen 9 7900X + NVIDIA GeForce RTX 2060, In-Depth Analysis
Revolution Idle is an unusual case for hardware analysis, as its genre typically implies minimal graphical demands. However, the measured data for the AMD Ryzen 9 7900X paired with the NVIDIA GeForce RTX 2060 reveals a performance profile that is heavily constrained by the GPU, even at lower settings. This combination ranks 1448th out of 1774 tested combos for this game, placing it in the lower percentile of systems. The data indicates that while the CPU is a top-tier desktop part, the GPU’s limits dominate the experience across nearly every resolution.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce RTX 2060 is the primary bottleneck in this system for Revolution Idle. The GPU operates with a base clock of 1365 MHz and a boost clock of 1680 MHz, paired with 6 GB of GDDR6 memory on a 192-bit bus, yielding a bandwidth of 336.0 GB/s. For a game that is not visually intensive, these specifications should theoretically be sufficient, yet the measured frame rates suggest otherwise. At 1080p, the GPU’s compute capabilities—6.451 TFLOPS FP32 and a pixel rate of 80.64 GPixel/s—produce playable results, but the drop-off to 4K is severe.
The RTX 2060’s 6 GB VRAM is a likely limiting factor at higher resolutions. At 3840x2160, the frame rates fall below 32 FPS across all settings, with Ultra dipping to 17.2 FPS. This suggests that memory capacity and bandwidth are insufficient for the higher pixel throughput demanded at 4K, even for a game with modest assets. The GPU’s passmark G3D score of 14111 and an average benchmark score of 16074 place it at the 58th percentile against all GPUs, indicating it is a mid-range part. Its nearest rival, the AMD Radeon RX 7600S, scores 15996, a delta of 0.5%, showing the RTX 2060 is only marginally ahead of that competitor.
The data shows that the GPU’s performance degrades linearly with resolution, but the settings impact is more nuanced. At 1440p, the difference between Low and High is 22.4 FPS, while at 4K, that same gap narrows to 7.4 FPS. This points to the GPU hitting a hard ceiling at 4K, where even reducing settings cannot compensate for the raw pixel count. The RTX 2060’s Turing architecture, with 1920 shading units and 120 TMUs, is simply outmatched by 4K workloads in this configuration.
Settings Recommendations — which preset gives the best experience per the measured rows
Given the measured data, the optimal settings depend heavily on the target resolution. At 1080p, the Low preset yields an average of 101.3 FPS, which is the highest frame rate recorded for this combo. Medium and High produce nearly identical results at 76.3 FPS and 75.3 FPS respectively, suggesting diminishing returns for the extra graphical fidelity. Ultra drops significantly to 47 FPS, a 54% reduction from Low, making it the least efficient choice.
For 1440p, the Low preset remains the best option, delivering 66.8 FPS, which is comfortably playable. Medium follows at 48.4 FPS, High at 44.4 FPS, and Ultra falls to 32.6 FPS. The data indicates that High and Medium are close, but Low provides a substantial 18.4 FPS advantage over Medium, making it the recommended preset for smooth gameplay. At 4K, no setting achieves a playable frame rate; Low peaks at 31.5 FPS, which is borderline, while Ultra bottoms out at 17.2 FPS. For this resolution, the data suggests that even the lowest settings cannot salvage a playable experience.
Across all resolutions, the Low preset consistently offers the best performance-to-quality ratio. The jump from Low to Medium at 1080p costs 25 FPS, which is a significant trade-off for marginal visual gains. The data supports a strategy of prioritizing frame rate over fidelity, especially since Revolution Idle is not a visually demanding title. Users with high-refresh monitors should stick to 1080p Low to maximize the FPS potential of this combo.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The frame rate scaling from 1080p to 4K reveals a classic GPU-bound scenario. At 1080p Low, the combo achieves 101.3 FPS. Moving to 1440p Low, the FPS drops to 66.8, a 34% reduction. At 4K Low, it falls to 31.5 FPS, a further 53% drop from 1440p. This non-linear degradation is characteristic of a GPU struggling to fill pixels, rather than a CPU limitation.
For the High preset, the scaling is even more pronounced: 75.3 FPS at 1080p, 44.4 FPS at 1440p (a 41% drop), and 24.1 FPS at 4K (a 46% drop from 1440p). The consistent halving of frame rates with each resolution step indicates that the RTX 2060’s memory bandwidth (336.0 GB/s) and fillrate are the primary constraints. The CPU, with its 12 cores and 24 threads, is clearly not the bottleneck—otherwise, the FPS would remain stable across resolutions.
The data supports the conclusion that the GPU is the limiting component at all resolutions. Even at 1080p Ultra, the FPS of 47 is far below the CPU’s potential, as evidenced by the Ryzen 9 7900X’s strong benchmark scores (e.g., 43695 in Cinebench R23 multicore). If the CPU were the limiting factor, we would expect similar FPS across different settings, but the 54 FPS spread between Low and Ultra at 1080p proves the GPU is the sole constraint.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the RTX 2060 delivers its best results. The Low preset averages 101.3 FPS, which is the only setting to break the 100 FPS threshold. Medium follows at 76.3 FPS, High at 75.3 FPS, and Ultra at 47 FPS. The gap between Low and Medium is 25 FPS, while the gap between Medium and High is just 1 FPS, indicating that Medium is a sweet spot for visual quality without a major FPS hit. Ultra, however, incurs a 29.3 FPS penalty over High, making it the least efficient preset.
At 2560x1440, the scores are more compressed. Low leads at 66.8 FPS, followed by Medium at 48.4 FPS, High at 44.4 FPS, and Ultra at 32.6 FPS. The delta between Low and Ultra is 34.2 FPS, which is smaller than at 1080p, suggesting that the GPU is nearing its limits. High and Medium are separated by just 4 FPS, making them nearly interchangeable in practice. For players targeting 60 FPS, only Low achieves it, and even then with a margin of just 6.8 FPS.
At 3840x2160, the results are uniformly poor. Low is the best at 31.5 FPS, followed by Medium at 25.5 FPS, High at 24.1 FPS, and Ultra at 17.2 FPS. The difference between Low and High is only 7.4 FPS, while Ultra is a full 8.3 FPS behind High. None of these scores reach the 30 FPS threshold consistently, making 4K impractical for this combo. The data shows that the RTX 2060’s 6 GB VRAM and 192-bit bus are inadequate for 4K workloads, regardless of settings.
How This Combo Ranks — use comboRankInGame vs other tested combos
In the database of tested combinations for Revolution Idle, the AMD Ryzen 9 7900X and NVIDIA GeForce RTX 2060 pairing ranks 1448th out of 1774 combos. This places it in the bottom 18% of all systems tested, which is a surprising result given the CPU’s high-end status. The ranking reflects the GPU’s mid-range position, as the RTX 2060 scores at the 58th percentile against all GPUs, with an average benchmark score of 16074.
The combo’s rank is likely dragged down by the GPU’s inability to handle higher resolutions, which is where many other combos excel. The Ryzen 9 7900X, with a 93rd percentile ranking against all CPUs and an average benchmark score of 50556, is clearly not the weak link. Its nearest CPU rivals—such as the Intel Core Ultra 5 235 (avg score 50598, delta -0.1%) and AMD Ryzen 9 5900XT (avg score 50738, delta -0.4%)—perform nearly identically, confirming that the CPU is not a differentiator in this game.
The ranking suggests that for Revolution Idle, the GPU selection matters more than the CPU. The RTX 2060’s nearest GPU rival, the AMD Radeon RX 7600S (avg score 15996, delta 0.5%), would likely produce similar frame rates, meaning the combo’s low rank is inherent to the GPU class rather than a misconfiguration. Users with this combo should expect performance below the median of tested systems, particularly at 4K.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 9 7900X is a 12-core, 24-thread processor based on the Zen 4 architecture, with a base clock of 4.70 GHz and a boost clock of 5.60 GHz. It features 64 MB of shared L3 cache and supports DDR5 memory with a bandwidth of 83.2 GB/s. These specifications make it a formidable desktop CPU, but in Revolution Idle, its role is largely passive. The game’s idle genre likely does not stress the CPU heavily, and the measured FPS data shows no evidence of CPU bottlenecks.
The CPU’s benchmark scores are exceptional, with a Cinebench R23 multicore score of 43695 and single-core score of 6168. The 3DMark max-thread score of 12536 and single-thread score of 1093 further indicate that the CPU can handle demanding workloads. However, in this game, the FPS is consistently limited by the GPU, as shown by the resolution scaling. If the CPU were limiting, we would see similar FPS across different settings, but the data shows a 54 FPS spread at 1080p between Low and Ultra.
The CPU’s 12 cores and 24 threads are more than sufficient for any game, but Revolution Idle’s low graphical demand means that the GPU’s 6 GB VRAM and 192-bit bus are the decisive factors. The CPU’s high single-thread performance (PassMark single-thread score of 4238) ensures that even at 1080p Low, the GPU can reach its maximum potential. The data suggests that upgrading the GPU would yield significant FPS gains, while upgrading the CPU would have negligible impact on this game’s performance.
Hardware Specifications
AMD Ryzen 9 7900X
NVIDIA GeForce RTX 2060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 7900X + NVIDIA GeForce RTX 2060 in Revolution Idle
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 31.5 |
| 3840x2160 | Medium | 25.5 |
| 3840x2160 | High | 24.1 |
| 3840x2160 | Ultra | 17.2 |
| 2560x1440 | Low | 66.8 |
| 2560x1440 | Medium | 48.4 |
| 2560x1440 | High | 44.4 |
| 2560x1440 | Ultra | 32.6 |
| 1920x1080 | Low | 101.3 |
| 1920x1080 | Medium | 76.3 |
| 1920x1080 | High | 75.3 |
| 1920x1080 | Ultra | 47.0 |
Revolution Idle with Ryzen 9 7900X + Other GPUs
See how Revolution Idle performs with the same CPU but different graphics cards.
Revolution Idle with RTX 2060 + Other CPUs
See how Revolution Idle performs with the same GPU but different processors.
Other Games with Ryzen 9 7900X + RTX 2060
Explore FPS benchmarks for other games using this same hardware combination.