Revolution Idle

Revolution Idle

AVERAGE FPS
50
playable

This combination offers playable performance with an average of 50 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 19 26 24 32
1440p QHD 30 45 46 68
1080p Full HD 49 76 80 100

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 32
3840x2160 High 26
3840x2160 Medium 24
3840x2160 Ultra 19
2560x1440 Low 68
2560x1440 Medium 46
2560x1440 High 45
2560x1440 Ultra 30
1920x1080 Low 100
1920x1080 Medium 80
1920x1080 High 76
1920x1080 Ultra 49

Revolution Idle with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 2060, In-Depth Analysis

The AMD Ryzen 9 5950X and NVIDIA GeForce RTX 2060 pairing in Revolution Idle presents a clear case of CPU over-provisioning relative to GPU capability. The measured results show a system that can handle high refresh rates at 1080p but struggles significantly at 4K, with the graphics card acting as the primary bottleneck. This analysis breaks down the performance data across resolutions and settings to give a practical picture of what this combo delivers.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and consistent across all settings, revealing a GPU-bound workload at higher resolutions. At Low settings, the average frame rate falls from 100.3 FPS at 1920x1080 to 67.8 FPS at 2560x1440, then plummets to 31.6 FPS at 3840x2160. That is a 68.5% reduction in performance from 1080p to 4K on Low settings, a steep decline that points squarely at the RTX 2060’s rendering limits rather than any CPU constraint.

The pattern repeats at High settings, where 76.3 FPS at 1080p drops to 44.9 FPS at 1440p and finally to 25.5 FPS at 4K. The gap between 1440p and 4K is particularly telling: at High settings, moving from 2560x1440 to 3840x2160 cuts performance by 43.2%, while the 1080p to 1440p transition only costs 41.1%. This nonlinear scaling indicates that the GPU is running out of pixel throughput and memory bandwidth as resolution increases.

Interestingly, the Medium preset shows the worst 4K result at 24 FPS, slightly below the High preset’s 25.5 FPS. This anomaly suggests that Medium may not be a well-optimized preset for this title, or that the settings changes between Medium and High have minimal impact on the GPU load but alter other parameters unfavorably. The Ultra preset, as expected, is the most demanding, yielding only 18.7 FPS at 4K, which is essentially unplayable for any smooth interaction.

The scaling data indicates that 1440p is the practical ceiling for this combo in Revolution Idle. At 2560x1440, the system delivers 44.9 FPS on High and 67.8 FPS on Low, which are playable numbers for an idle game where absolute smoothness is less critical than in fast-paced genres. However, 4K is not viable, with every preset falling below 32 FPS, making the experience feel sluggish and unresponsive.

Settings Recommendations

Based on the measured rows, the Low preset at 2560x1440 offers the best balance, delivering 67.8 FPS with the least GPU strain. This is the sweet spot for this hardware combination, providing a smooth experience without pushing the RTX 2060 to its limits. At 1080p, Low settings hit 100.3 FPS, which is excellent for any display with a high refresh rate, but the jump to 1440p costs only 32.5 FPS while offering significantly more screen real estate.

For users who prefer visual fidelity over raw frame rate, the High preset at 1920x1080 is the better choice, achieving 76.3 FPS. This is still well above the 60 FPS threshold for smooth gameplay, and the visual upgrade from Low to High is substantial in most titles. However, at 1440p, High drops to 44.9 FPS, which is acceptable for an idle game but not ideal if you have a 60 Hz monitor, as you will see occasional dips below the refresh rate.

The Medium preset is the least recommended option across all resolutions. At 1080p, it delivers 79.6 FPS, which is only 3.3 FPS higher than High but likely with worse visual quality. At 1440p, Medium yields 46.4 FPS, marginally better than High’s 44.9 FPS but not enough to justify the graphical downgrade. The 4K Medium result of 24 FPS is the second-worst score in the entire dataset, making it a poor choice for any resolution above 1080p.

Ultra settings should be avoided entirely with this GPU. The 1080p Ultra result of 48.9 FPS is barely playable, and the 1440p Ultra score of 30.3 FPS is a slideshow. At 4K, Ultra falls to 18.7 FPS, which is unusable. The performance cost of Ultra over High is 27.4 FPS at 1080p, a 35.9% reduction, which is not worth the marginal visual improvements in an idle game.

GPU Role

The NVIDIA GeForce RTX 2060, based on the TU106 chip with Turing architecture, is the clear limiting factor in this combo. Its 6 GB of GDDR6 memory on a 192-bit bus provides 336.0 GB/s of bandwidth, which appears insufficient for 4K workloads in Revolution Idle, as evidenced by the sub-32 FPS results at that resolution. The GPU’s 1920 shading units and 48 ROPs are tasked with rendering the game’s visuals, and the data shows they struggle with higher pixel counts.

The boost clock of 1680 MHz and base clock of 1365 MHz are modest by today’s standards, and the GPU’s FP32 performance of 6.451 TFLOPS is not enough to maintain high frame rates at 4K. The GPU’s percentile ranking of 58 versus all GPUs places it in the mid-range, which aligns with its measured performance in this game. Its nearest rival, the AMD Radeon RX 7600S, scores nearly identically with a deltaPct of 0.5%, confirming that the RTX 2060 is a solid mid-tier card but not a high-end solution.

The memory configuration is particularly telling. At 4K, the GPU’s 6 GB VRAM may also be a factor, as texture data and frame buffers consume more memory at higher resolutions. The 24 FPS Medium result at 4K, which is lower than High’s 25.5 FPS, suggests that the Medium preset may use different memory allocation or compression techniques that hurt performance. The GPU’s 14 Gbps effective memory speed is decent, but the 192-bit bus width limits total bandwidth, which is likely why 4K performance collapses.

How This Combo Ranks

In the overall benchmark database, this specific combination of the AMD Ryzen 9 5950X and NVIDIA GeForce RTX 2060 ranks 1422 out of 1774 tested combos in Revolution Idle. This places it in the bottom 19.8% of all combinations, which is a poor result given the CPU’s high-end status. The ranking reflects the GPU’s limitations, as the Ryzen 9 5950X is a top-tier processor that is severely held back by the RTX 2060 in this title.

The CPU alone ranks in the 93rd percentile among all processors, with an average benchmark score of 49062. Its nearest rival, the Intel Core i5-14600K, scores 49166 with a deltaPct of -0.2%, meaning the Ryzen 9 is essentially tied with that chip in synthetic benchmarks. This suggests the CPU is not the bottleneck, but the combo rank shows how a weak GPU drags down the overall system performance.

The GPU’s percentile ranking of 58 among all GPUs is more in line with the combo’s performance. Its average benchmark score of 16074 is close to its nearest rival, the AMD Radeon RX 7600S, which scores 15996 with a deltaPct of 0.5%. This mid-range GPU positioning explains why the combo struggles at higher resolutions, as the CPU’s massive compute potential is wasted when the GPU cannot keep up.

CPU Role

The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates on the AMD Socket AM4 platform with a base clock of 3.40 GHz and a boost clock of 4.90 GHz. This CPU is an absolute powerhouse for multi-threaded workloads, as shown by its Cinebench R23 multicore score of 38607 and PassMark multithread score of 45424. However, in Revolution Idle, this raw compute power is largely irrelevant, as the game is GPU-bound at most settings.

The CPU’s 64 MB of L3 cache and 8,300 million transistors on a 7 nm process give it exceptional single-thread performance as well, with a Geekbench single-core score of 2211 and a PassMark single-thread score of 3470. These scores are competitive with the best desktop CPUs, but the game’s performance scaling with resolution proves that the CPU is not the limiting factor. At 1080p Low, where the GPU has the least work, the system still only achieves 100.3 FPS, which is far below what the CPU could theoretically support.

The Ryzen 9 5950X’s nearest rivals in synthetic benchmarks include the Intel Core i5-14600K and i5-14600KF, which score within 0.6% of the AMD chip. This indicates that the CPU is not a weak link, but rather the GPU is the bottleneck. The CPU’s 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are more than sufficient for this game, and the data shows that upgrading the GPU would provide far more benefit than any CPU change.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. The Low preset averages 100.3 FPS, which is the highest score in the entire dataset. Medium and High are close, at 79.6 FPS and 76.3 FPS respectively, showing that the GPU handles moderate settings well at this resolution. Ultra drops to 48.9 FPS, a significant 51.4 FPS loss from Low, indicating that the most demanding preset is too much for the RTX 2060 even at 1080p.

Moving to 2560x1440, performance drops noticeably. Low settings still manage 67.8 FPS, which is playable, but Medium and High fall to 46.4 FPS and 44.9 FPS respectively. Ultra is the worst at 30.3 FPS, making it unsuitable for any serious play. The gap between Low and Ultra at 1440p is 37.5 FPS, showing that settings have a major impact at this resolution.

At 3840x2160, the results are poor across the board. Low settings achieve 31.6 FPS, which is the only preset above 30 FPS at 4K. High follows at 25.5 FPS, then Medium at 24 FPS, and Ultra at 18.7 FPS. The 4K results are uniformly below playable thresholds, confirming that this combo is not suited for 4K gaming in Revolution Idle. The data suggests that 1440p Low is the highest resolution and settings combination that provides a consistently smooth experience, while 1080p offers more headroom for higher quality presets.

Hardware Specifications

AMD Ryzen 9 5950X

Cores / Threads 16 / 32
Base Clock 3400 MHz
Boost Clock 4900 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 2060

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1680 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 9 5950X + NVIDIA GeForce RTX 2060 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 31.6
3840x2160 High 25.5
3840x2160 Medium 24.0
3840x2160 Ultra 18.7
2560x1440 Low 67.8
2560x1440 Medium 46.4
2560x1440 High 44.9
2560x1440 Ultra 30.3
1920x1080 Low 100.3
1920x1080 Medium 79.6
1920x1080 High 76.3
1920x1080 Ultra 48.9

Revolution Idle with Ryzen 9 5950X + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 2060 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with Ryzen 9 5950X + RTX 2060

Explore FPS benchmarks for other games using this same hardware combination.