Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
61
good

This combination provides smooth gameplay with an average of 61 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 24 35 43 56
1440p QHD 39 54 68 88
1080p Full HD 51 74 87 119

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 56
3840x2160 Medium 43
3840x2160 High 35
3840x2160 Ultra 24
2560x1440 Low 88
2560x1440 Medium 68
2560x1440 High 54
2560x1440 Ultra 39
1920x1080 Low 119
1920x1080 Medium 87
1920x1080 High 74
1920x1080 Ultra 51

Red Dead Redemption 2 with Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5060, In-Depth Analysis

The Intel Core Ultra 7 265K paired with the NVIDIA GeForce RTX 5060 delivers a revealing performance profile in Red Dead Redemption 2, with the data showing a system that is heavily constrained by graphics settings and resolution rather than CPU potential. The measured frames per second across twelve configurations paint a clear picture of a mid-range GPU struggling to maintain high refresh rates at higher resolutions, while the 20-core processor provides a stable foundation that rarely becomes the limiting factor. This combination ranks 835th out of 1687 tested combos for this title, placing it in the middle of the pack, a position that reflects the GPU's performance ceiling rather than any deficiency in the processor.

Settings Recommendations

The benchmark data indicates that the Medium preset offers the most balanced experience across all tested resolutions, providing a meaningful improvement over Low settings while avoiding the steep performance penalty of High and Ultra. At 1920x1080, Medium delivers 87.4 FPS, which represents a 26.6% increase over High's 74.1 FPS, while still maintaining a substantial visual quality advantage over Low's 119.1 FPS. The same pattern holds at 2560x1440, where Medium achieves 67.6 FPS, a figure that remains comfortably playable, whereas High drops to 53.5 FPS and Ultra falls to 38.8 FPS.

For players prioritizing smoothness at 3840x2160, the Low preset is the only viable option, producing 55.7 FPS, while Medium manages 43.3 FPS and High drops to 35 FPS. The Ultra preset at 4K is effectively unplayable at 24.2 FPS, making it a non-option for this hardware combination. The data suggests that Medium at 1080p is the sweet spot for this combo, as it offers a 73% higher frame rate than High while still providing a level of detail that exceeds the minimum preset. At 1440p, Medium is the recommended choice for those who can tolerate slightly lower frame rates, as the 67.6 FPS result remains above the 60 FPS threshold that many players consider essential.

FAQ

Q: What is the highest average frame rate this combo can achieve in Red Dead Redemption 2?

A: The highest measured average is 119.1 FPS at 1920x1080 with Low settings, which represents the absolute ceiling for this configuration. The next best result is 88 FPS at 2560x1440 with Low settings, showing a substantial drop when resolution increases.

Q: How does the Ultra preset compare to High at 1080p?

A: The Ultra preset delivers 50.5 FPS, which is 31.8% lower than High's 74.1 FPS at the same resolution. This indicates that the Ultra preset imposes a significant rendering cost that the RTX 5060 cannot absorb without a major frame rate penalty.

Q: Is the Intel Core Ultra 7 265K a bottleneck in this game?

A: The processor's benchmark scores suggest it is not the limiting factor. With a Cinebench R23 multi-core score of 50009 and a 97th percentile ranking among all CPUs, the 265K provides ample headroom. The FPS drops across resolutions follow a pattern consistent with GPU limitations, not CPU constraints.

Q: What is the performance difference between 4K Low and 4K Medium?

A: The jump from Low to Medium at 3840x2160 reduces the average frame rate from 55.7 FPS to 43.3 FPS, a 22.3% decrease. This is a substantial trade-off that yields only a modest visual improvement, making Low the more sensible choice for 4K play.

Q: How does this combo's performance compare to other tested configurations?

A: The combo ranks 835th out of 1687 tested combos, placing it in the 49.5th percentile. This mid-pack position reflects the RTX 5060's performance class, which is roughly equivalent to rivals like the AMD Radeon RX 7700 XT, based on an average benchmark score delta of 0%.

How This Combo Ranks

The comboRankInGame of 835 out of 1687 places this pairing almost exactly in the middle of the database, a result that aligns with the component specifications. The RTX 5060's average benchmark score of 30109 places it in the 73rd percentile of all GPUs, while the 265K's score of 79102 puts it in the 97th percentile of CPUs. This disparity explains the overall ranking: the processor is a top-tier component, but the GPU is only slightly above average, and this game is clearly GPU-bound. For context, the RTX 5060's nearest rivals include the AMD Radeon RX 7700 XT with a deltaPct of 0%, indicating virtually identical average performance, and the NVIDIA GeForce RTX 5070 Mobile at 0.6% higher. The 265K's nearest rivals, such as the Intel Core i9-14900K at -0.9%, show that the CPU is competitive with flagship processors from the previous generation.

The mid-pack ranking suggests that this combo will deliver playable frame rates at 1080p and 1440p across most settings, but it will not excel in this title. The data implies that users seeking higher rankings would need to pair the 265K with a more powerful GPU, as the processor has significant untapped headroom. Conversely, the RTX 5060's performance ceiling is the primary constraint, and the ranking reflects this bottleneck.

Measured FPS Breakdown

At 1920x1080, the full range of settings reveals a wide performance spread. Low settings produce 119.1 FPS, which is the only configuration that exceeds the 100 FPS mark. Medium drops to 87.4 FPS, a 26.6% reduction from Low, while High further declines to 74.1 FPS, a 15.2% reduction from Medium. Ultra is the most demanding, yielding 50.5 FPS, which is a 31.8% drop from High and a 57.6% drop from Low. This pattern shows that each settings tier imposes a significant cost, with the gap between Medium and High being relatively smaller than the jump from High to Ultra.

Moving to 2560x1440, the same settings hierarchy is preserved but with reduced absolute values. Low achieves 88 FPS, Medium reaches 67.6 FPS, and High falls to 53.5 FPS. The Ultra preset at 1440p produces 38.8 FPS, which is below the 40 FPS mark and indicates a struggling experience. The relative drops from 1080p to 1440p are consistent: Low decreases by 26.1%, Medium by 22.7%, High by 27.8%, and Ultra by 23.2%. This consistency suggests that the GPU's rendering load scales predictably with resolution.

At 3840x2160, the results become marginal. Low settings yield 55.7 FPS, which is the only playable option. Medium drops to 43.3 FPS, High to 35 FPS, and Ultra to 24.2 FPS. The transition from 1440p to 4K is severe: Low loses 36.7% of its frame rate, Medium loses 35.9%, High loses 34.6%, and Ultra loses 37.6%. These near-uniform losses indicate that the GPU is operating at its limits, and the 8 GB VRAM may be a contributing factor at this resolution.

Resolution Scaling

The frame rate degradation from 1080p to 4K shows a clear pattern that identifies the GPU as the bottleneck. At Low settings, the FPS drops from 119.1 at 1080p to 88 at 1440p, a 26.1% reduction, and then to 55.7 at 4K, a further 36.7% reduction. At High settings, the drop is from 74.1 to 53.5 to 35, representing reductions of 27.8% and 34.6% respectively. The scaling is not perfectly linear, but the magnitude of the drops is consistent across settings, which is characteristic of a GPU-limited scenario.

The data suggests that the RTX 5060's 128-bit memory bus and 8 GB VRAM capacity are strained at higher resolutions. The 448.0 GB/s bandwidth is sufficient for 1080p and 1440p, but at 4K, the memory subsystem likely becomes a limiting factor. The consistent 35-37% drop from 1440p to 4K across all settings indicates that the GPU is not just pixel-bound but also memory-bound, as the increased resolution demands more bandwidth and capacity. The CPU's role in this scaling is minimal, as the 265K's 30 MB of L3 cache and high single-thread performance (Cinebench R23 single-core score of 7060) provide ample processing power to feed the GPU at all resolutions.

CPU Role

The Intel Core Ultra 7 265K is a 20-core, 20-thread processor based on the Arrow Lake architecture, with a boost clock of 5.50 GHz. Its benchmark results indicate it is a high-performance part, with a Cinebench R23 multi-core score of 50009 and a single-core score of 7060. The PassMark multithread score of 58838 and single-thread score of 4904 further confirm its capability. In Red Dead Redemption 2, which is a demanding title that utilizes multiple cores, the 265K provides a strong foundation, but the measured FPS data shows that it is not the limiting factor.

The performance scaling across resolutions—from 119.1 FPS at 1080p Low to 55.7 FPS at 4K Low—shows a pattern that is typical of GPU-bound scenarios. If the CPU were the bottleneck, we would expect to see frame rates plateau or degrade more steeply at lower resolutions where the GPU has less work to do. Instead, the FPS scales smoothly with resolution, indicating that the 265K is delivering frames as fast as the RTX 5060 can render them. The processor's 97th percentile ranking among all CPUs, with a delta of only -0.2% to the Core Ultra 7 265KF and -0.9% to the Core i9-14900K, suggests that it is not holding back the GPU in any meaningful way.

GPU Role

The NVIDIA GeForce RTX 5060 is the definitive performance limiter in this combination. With 8 GB of GDDR7 memory on a 128-bit bus, it offers 448.0 GB/s of bandwidth, which is modest for modern high-resolution gaming. The GPU's benchmark scores show a 73rd percentile ranking, with an average score of 30109. Its nearest rival, the AMD Radeon RX 7700 XT, has a deltaPct of 0%, indicating identical average performance, which helps contextualize the expected frame rates in this title.

The measured FPS data shows the RTX 5060's capabilities clearly. At 1080p, it can exceed 100 FPS only on Low settings, and at 4K, it struggles to maintain 60 FPS even on Low. The steep drop from 1080p Low to 4K Low—from 119.1 to 55.7 FPS—represents a 53.2% reduction, which is a direct consequence of the GPU's limited memory bandwidth and VRAM capacity. The 8 GB VRAM is likely a bottleneck at 4K with High or Ultra settings, as the game's texture and geometry requirements exceed what the GPU can store locally, forcing the system to rely on slower memory transfers. The GPU's 48 ROPs and 120 TMUs are adequate for 1080p and 1440p, but at 4K, the pixel fill rate (119.9 GPixel/s) becomes a limiting factor, as evidenced by the 35 FPS result at 4K High.

Hardware Specifications

Intel Core Ultra 7 265K

Cores / Threads 20 / 20
Base Clock 3900 MHz
Boost Clock 5500 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 5060

VRAM 8 GB GDDR7
Base Clock —
Boost Clock 2497 MHz MHz
TDP 145 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265K + NVIDIA GeForce RTX 5060 in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 55.7
3840x2160 Medium 43.3
3840x2160 High 35.0
3840x2160 Ultra 24.2
2560x1440 Low 88.0
2560x1440 Medium 67.6
2560x1440 High 53.5
2560x1440 Ultra 38.8
1920x1080 Low 119.1
1920x1080 Medium 87.4
1920x1080 High 74.1
1920x1080 Ultra 50.5

Red Dead Redemption 2 with iUltra 7 265K + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Red Dead Redemption 2 with RTX 5060 + Other CPUs

See how Red Dead Redemption 2 performs with the same GPU but different processors.

Other Games with iUltra 7 265K + RTX 5060

Explore FPS benchmarks for other games using this same hardware combination.